Housing Urban and Rular Development Government Departments Closing in 6 days TDR #58411749

Tender For Special Repairs To Bore Well Motor And Pipe Line In Regional Centre Of Tamilnadu State Judicial Academy In Race Course At Coimbatore.

Issued by Government Departments · Coimbatore, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Nov 2026
6 days left
EMD
1000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Special Repairs To Bore Well Motor And Pipe Line In Regional Centre Of Tamilnadu State Judicial Academy In Race Course At Coimbatore.

BOQ

Name of Work:- SPECIAL REPAIRS TO BORE WELL MOTOR AND PIPE LINE IN REGIONAL CENTRE OF TAMILNADU STATE JUDICIAL ACADEMY IN RACE COURSE AT COIMBATORE.
Sl. No. Item Description
1Removing the borewell motor and pumpset using Tool, Tripod post, chain pulley including cost of labour charges and transportation, Tools and Plants etc., complete complying as directed by the departmental officers as per standard specification.
2Supply and erection of 5 HP ISI make bore well SUBMERSIBLE MOTOR 40 Stage with requried accessories for the 5 HP ISI make 3 PHASE electric motor 2900 RPM, 415 / 440V 50Cys. Submersible Pumpset having brozen impellers, S.S.Shaft cable of discharging 100 to 200 LPM aginst a total Head of 135M to 100M with ISI Mark and with an outlet of 50mm and suitable dia borewell , including Conveyance and Errection charges including required G.I. specials, M.R. Tape, Electrical connection charges, delivery pipe connection and other plumbing works including hire charges for Chain pully, Tripod and other Tools and trial run for three days etc., complete complying as directed by the departmental offficer.
3Supplying and fixing M.S. fabricated wall mounting, M.S. PANEL BOARD with internal wiring as per I.E. rules and necessary locking arrangements with suitable cutler and hammer type bush button automatic 5 HP Texvel DOL BCH Starter with SPU -1NO suitable 15 Amp, TPIC switch, 0 to 500 V Voltmeter, 0 to 20 Amps Ammeeter, Single phase preventor, pilot lamps with 3 bulbs to indicate power supply and 50mm dia G.I.Coupling - 22Nos, M.S.Clamps - 2Nos, 2.5Sq.mm wire 3core, copper, flat submersible cable, including Conveyance and Errection charges including required G.I. specials, M.R. Tape, Electrical connection charges, delivery pipe connection and other plumbing works etc., complete complying as directed by the departmental offficer.
4Supply and fixing of water proof 20mm dia NYLON ROPE for borewell as per ISI specification and including cost of materials with all necessary accrssories etc., complete as directed by the departmental officers .
5Supplying and fixing of MS clamp of size 450x40x6mm with bolt and nuts etc., including cost of materials and labour charges for fixing in position with all necessary accessories etc., complete complying as directed by the departmental officers as per standard specifications.
6Supply and fixing of 40mm dia UPVC PIPE for delivery cum support pipe submersible motor inside borewell including fixing and for standard quality and size etc.,complete complying as directed by the departmental officers.
7Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply Below ground level.
840mm diametre UPVC Pipe
932mm diametre UPVC Pipe
10Supplying and fixing OF size 40mm new GUN METAL WHEEL (HEAVY TYPE) of approved quality and good variety excluding the fixing charges but including necessary cutting and threading of G.I. pipes for jointing the G.I. specials and providing two coats of painting with good quality and approved variety of anti-corrosive paint over a coat of red oxide primer coat in the case of pipe line above ground level and one coat of tarring in the case of pipe line below ground level etc., complete.
11Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements complete complying as directed by the department officers as per standard specification.Note:- Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separte provision for fixing UPVC specials needs to be allowed.
1240 X 32mm diametre UPVC REDUCER.
13GST 18% (CGST AT 9% + SGST 9%) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58411749
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 23-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Special Repairs To Bore Well Motor And Pipe Line In Regional Centre Of Tamilnadu State Judicial Academy In Race Course At Coimbatore.
Basic Detail
Tender No 01/12N/CBE-DVN /2026-27
Bidding Type Tender
Location
City Coimbatore
State Tamil Nadu
Key Dates
Publish Date 06 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 1000
Exemption Not Available
Document List
74d6c56b-28b1-4a57-b0d5-8bd0373ba32e.html
BOQ_867369.xls
K2TenderDocument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

74d6c56b-28b1-4a57-b0d5-8bd0373ba32e.html

xls

BOQ_867369.xls

pdf

K2TenderDocument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender