Defence Statutory Bodies & Commissions/Committees Closing in 6 days TDR #58411418

Tender For special Repairs To Cook House And Dining Hall Incl Connected Sewage Line Etc Of Bldgs No P-72 (A-3) At 4/8 Gr Under Ge (North) Bangalore

Issued by Statutory Bodies & Commissions/Committees · Bengaluru Urban, Karnataka
Tender Value
32.20 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
6 days left
EMD
64400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repairs To Cook House And Dining Hall Incl Connected Sewage Line Etc Of Bldgs No P-72 (A-3) At 4/8 Gr Under Ge (North) Bangalore

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 12-Nov-2026 8389Corrigendum BOQ 27-Nov-2026

BOQ

Name of Work:- SPL REPAIRS TO COOK HOUSE AND DINING HALL INCL CONNECTED SEWAGE LINE ETC OF BLDGS NO P-72 (A-3) AT 4/8 GR UNDER GE (NORTH) BANGALORE
Sl. No. Item Description
1Demolition of brick work /stone masonry/PCC block masonry built in cement mortar of any description all as specified and directed.
2Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.
3Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed
4Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises etc complete all as specified and as directed
5Dismantling of Stone set paving of any description or thickness or thickness in floors, aprons etc (Laid bedded and pointed in any cement mortar) including removing off the premises etc complete all as specified and as directed
6Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed
7Taking down chowkats or frames with shutters (without taking off shutter from frames) area not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc including making good the distrubed surface to match adjoining surfaces complete all as specified and as directed
8Taking down chowkats or frames with shutters (without taking off shutter from frames) area exc. 1.5 sqm but not exc 4sqm each, including cutting holes for removing the hold fast etc including making good the distrubed surface to match adjoining surfaces complete all as specified and as directed
9Taking down shutter of any description exc 1.00 sqm but not exc 2.00 Sqm each etc complete all as specified and as directed
10Taking down and ref-fixing in the same opening of shutter exc 1.00 sqm but not exc 2.00 Sqm each of any description etc complete all as specified and as directed
11Taking down steel tubing & connections of 20 mm dia bore complete all as specified and as directed
12Taking down steel tubing & connections of 25 mm dia bore complete all as specified and as directed
13Dismantling water tanks exc 500ltr but not exc 1000 ltr of any description etc complete all as specified and as directed
14Dismantling water tanks exc 1000ltr but not exc 2000 ltr of any description etc complete all as specified and as directed
15M&L for Plain cement concrete (1:4:8) type D- 2 using 40mm graded stone aggregate as in 75 mm thick sub base of flooing etc complete all as specified and as directed
16M&L for Plain cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregates as in 25 mm thick sub base to flooring etc complete all as specified and as directed
17M&L for screed bed or bedding layer of 15mm thick cement mortar (1:6) for laying floor finishes complete all as specified and as directed.
18M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed
19M&L for Hard stone coloured tiles of size 600mmx600mm, 15 to 16mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed
20M&L for Granite stone slab 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including grinding the edges half round and polishing including etc complete all as specified and directed.
21M&L for rendering 10 mm thick cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat of dado/skirting etc complete all as specified and as directed
22M&L for Glazed ceramic coloured tiles 300x450x7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and and as directed
23M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in 75 mm thick plinth protection etc, finished even and smooth including joints filling with sealing compound Grade \\"A\\" without using extra cement complete all as specified and directed.
24M&L for cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick exterior grade, coloured glossy finish rubber pressed, set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed
25M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
26M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed
27M&L Pre-cast Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregates as in solid block masonary exc 10 cm in width and setting in cement mortar (1:6) all as specified and directed.
28M&L for rendering 5 mm thick cement mortar (1:3) on fair faces of brick work or concrete ceiling surface finished even and smooth without using extra cement etc complete all as specified and as directed
29M&L for rendering 15 mm thick cement mortar (1:6) on fair faces of brick work or concrete wall surface finsihed even and smooth without using extra cement etc complete all as specified and as directed
30M&L for rendering 15 mm thick cement mortar (1:4) on fair faces of brick work or concrete wall surface finsihed even and smooth without using extra cement mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately
31M&L for Plain cement concrete (1:2:4) type B-0 using 12.50mm graded stone aggregate as in copings, parapets and railing upto 60cm height, leveling concrete for roof slab, kerbs, water troughs / chajjas and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork all as specified and as directed
32M&L for rendering 10 mm thick cement mortar (1:3) on fair faces of concrete roof surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed (Notes : WPC shall be measured and paid seperately )
33Supply only liquid water proofing compound, ISI marked, complete all as specified and directed.
34M&L for water proofing treatment over RCC roof surfaces with the following specification al as specified & directed :-(i) Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth (ii) Compatible primer/bonding bitumen @ 0.40 Litr/Sqm (iii) Laying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.80kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over and torch applications of membrane with 75mm side overlap and 100mm end lap (iv) Applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm
35S&F Pressed steel frame of size 125 X 60 mm for door, made with 1.25 mm thick M S sheet with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed
36S&F Pressed steel frame of size 105 X 60 mm for door, made with 1.25 mm thick M S sheet with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed
37M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in hold fast and filling in pressed steel chowkat including necessary formwork etc complete all as specified and as directed
38S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed
39S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed
40S&F Flush shutter 35mm thick solid core construction with both face is covered with decorative face veneer with lipping/frame to match, kiln seasoned and chemically pressure treated complete all as specified and as directed
41M&L Hollow steel section for structural as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to IS-4923 etc complete all as specified and as directed Please Enable Macros to View BoQ information
42M&L Hollow steel section for structural as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to IS-4923 etc complete all as specified and as directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58411418
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 32.20 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repairs To Cook House And Dining Hall Incl Connected Sewage Line Etc Of Bldgs No P-72 (A-3) At 4/8 Gr Under Ge (North) Bangalore
Basic Detail
Tender No 8389
Bidding Type Tender
Location
City Bengaluru Urban
State Karnataka
Key Dates
Publish Date 12 Nov 2026
Submission Date 27 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value 32.20 Lakhs
Tender Fee 500
EMD 64400
Exemption Available
Document List
385c9ffc-70d1-4545-8de2-cb949b2689eb.html
8389Tender.pdf
BOQ_894771.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 6 days
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

385c9ffc-70d1-4545-8de2-cb949b2689eb.html

pdf

8389Tender.pdf

xls

BOQ_894771.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender