Tender For Repair And Maintenance Of Deputy Commissioner Office At Hamirpur (Hp). (Sh:- Providing And Fixing First Class Teak Wood Planks Panelling And Acp Ceiling Including Deco Polishing).
Tender Value
9.08 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
2 days left
EMD
18200
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Deputy Commissioner Office At Hamirpur (Hp). (Sh:- Providing And Fixing First Class Teak Wood Planks Panelling And Acp Ceiling Including Deco Polishing).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 1st (First) class high quality structural teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm (four millimetre) thick aluminium composite panel material consisting of 3mm (Three millimetre) thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm (Zero point five millimetre thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for HPL/ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Providing and applying Polyurethane (PU) polishing to exterior/interior woodwork and furniture of approved shade and make (such as Asian Paint, ICA, Berger or equivalent) to achieve a matte or glossy finish. The work shall include thorough surface preparation by scrapping off old polish/paint (if applicable), systematic sanding with sandpaper of progressive grits to achieve a smooth and even surface, raking out joints, cleaning dust, filling wood grains/pores with approved wood fillers and applying an initial coat of PU sealer. complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 4 | Providing and fixing 75mm (seventy five millimetre) dia nominal size PVC soil, waste and vent pipes including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 5 | Providing and laying 600x600 mm ( six hundred into six hundred millimetre) Full Body Charged Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent) and conforming to IS: 15622, of Orient bell/ Kazaria/ AGL/ RAK /Johnson & Johnson approved make, in all colours and shades,in skirting, riser of steps laid over 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required comple including grouting the joints with white cement and matching pigments etc., complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 6 | Providing and fixing 15 cm (Fifteen centimetre) wide, 45 cm (Forty five centimetre) overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm (Forty into three millimetre) size, bolts, nuts and washers etcetera, including making necessary connections with rain water pipes 0.80 mm (Zero point eight zero millimetre) thick with zinc coating not less than 275 gm/m² (Two hundred sevventy five gram per square metre) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender