Tender For maintenance Of electrical installation In Nrb At Chandigarh (Replacement Of Defective Ictpn And Steel Shutter In Ccet, Sector-26, Cahndigarh.
Tender Value
5.90 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
3 days left
EMD
11820
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance Of electrical installation In Nrb At Chandigarh (Replacement Of Defective Ictpn And Steel Shutter In Ccet, Sector-26, Cahndigarh.
BOQ
| Sl. No. | Item Description |
| 1 | DSR 12.1.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 2 | 1.00 mm thick with zinc coating not less than 275 gm/m² |
| 3 | DSR 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 4 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 5 | DSR 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 6 | 4 way (4 + 12), Double door |
| 7 | 6 way (4 + 18), Double door |
| 8 | DSR 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 9 | Single pole |
| 10 | Triple pole and neutral |
| 11 | Supply & erection of Adopter box of suitable size required made out of 16GMS sheet The box to be provided with front detachable cover and having holes of out going / incoming pipe / cable / wire / pipe. The boxes shall be painted with 2 coats of approval paint after applying one coat of primer. The size and design of the boxes shall be as per actual requirement at site. The box is fixed on existing surface by rawl plugs / screws etc. suitable. |
| 12 | DSR item No.2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required |
| 13 | 100 Amp 4 Pole MCCB (Thermal Magnetic release). |
| 14 | 250 Amp 4 Pole MCCB (Microprocessor release). |
| 15 | 400 Amp 4 Pole MCCB (Microprocessor release). |
| 16 | DSR item No.8.1.3 LED Down lighter (SMD Type) (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED Recessed /surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS: 10322 with driver as per the requirement with Driver efficiency >85%, |
| 17 | 12 -15 watt |
| 18 | Fabrication & erection of steel shutters for electrical niches as per following specifications: FRAME: The shutter of suitable dimensions for electrical nitch shall be made out of 16 G.M.S. sheet. The shutter frame shall be 1-1/2”x1-1/2”x1-1/2” channel frame 4 Nos. ‘L’ type holdfasts for fixing the same on the wall. |
| 19 | S/E of enclosure for MCCB 63/100/125 Amp 3 Pole / 4 pole made out of 16 Gauge M.S. sheet. The enclosure is to be painted after one coat of primer including its erection in existing angle iron board with nut bolts/ screws etc. |
| 20 | S/E of enclosure for MCCB 200/250/315/400 Amp 3 Pole / 4 pole made out of 16 Gauge M.S. sheet. The enclosure is to be painted after one coat of primer including its erection in existing angle iron board with nut bolts/ screws etc. to complete the job to the entire satisfaction of Engineer In Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender