Power Government Departments Closing in 2 days TDR #58410674

Tender For Painting Of Exterior And Interior Surfaces Along With Chemical Treatment Of Construction/Expansion Joints, Roof Treatment And Walls Of Power House Building At Power Station-I Of Tcfhp, Leusipukuri, District - Darjeeling.

Issued by Government Departments · Darjeeling, West Bengal
Tender Value
56.52 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
2 days left
EMD
1.13 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Painting Of Exterior And Interior Surfaces Along With Chemical Treatment Of Construction/Expansion Joints, Roof Treatment And Walls Of Power House Building At Power Station-I Of Tcfhp, Leusipukuri, District - Darjeeling.

BOQ

Name of Work:- Painting of Exterior and Interior Surfaces along with Chemical Treatment of Construction/Expansion Joints, roof treatment and Walls of Power House Building at Power Station-I of TCFHP, Leusipukuri, District – Darjeeling.
Sl. No. Item Description
1Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
2Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat)a) Normal Acrylic Emulsion
3Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge)
4Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge).
5Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) One Coat, Solvent based interior grade Acrylic Primer.
6Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Standard Quality.
7Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint.
8Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
9Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface : With other than Super gloss of ved quality-Two coats (with any shade except white)
10Removing old paint from blistered painted surface of steel or other metal by chipping including scraping and cleaning and exposing the original surface.
11Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc
12Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface : With other than hi-gloss of approved quality- Two coats (with any shade except white)
13Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) 4 mm thick
14Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
15Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I) SAIL/TATA/RINL
16Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I) SAIL/TATA/RINL
17Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I) SAIL/TATA/RINL
18Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, as per relevant IS codes (b) River bazree In Ground Floor
19In 1st Floor
20In 2nd floor
21Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in Ground floor as per relevant IS codes. (ii ) River Bazree
22Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in First floor as per relevant IS codes. (ii ) River Bazree
23Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in Second floor as per relevant IS codes. (ii ) River Bazree
24Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (in Ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.
25in 1st floor.
26in 2nd floor
27Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in-charge upto 3.90 meter height.
28Extra for additional 3.6m height or part thereof of the scaffholding;
29Shifting of scaffolding upto 3.9m height;
30Shifting of scaffolding beyond 3.9m height;
31Supplying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-incharge. for Structural Glazing/Curtain wall. Weather Silicone sealant for filling the Grove line between Glasses or any other material for facial work.
32Labour for Chipping of concrete surface before taking up Plastering work.
33Plaster (to wall, floor, ceiling etc.) with sand and cement mortarincluding rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary. [Excludingcost of chipping over concrete surface] With 1:4 cement mortar, a) 20 mm thick plaster
34Plaster (to wall, floor, ceiling etc.) with sand and cement mortarincluding rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary. [Excludingcost of chipping over concrete surface] With 1:4 cement mortar, b) 15 mm thick plaster
35Plaster (to wall, floor, ceiling etc.) with sand and cement mortarincluding rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary. [Excludingcost of chipping over concrete surface] With 1:4 cement mortar, c) 10 mm thick plaster
36Making V-groove line ( 12 mm wide,12 mm deep) in plasteredsurface.
37Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.
38Comprehensive Leakage Treatment of Expansion/Construction Joints along with Intake Side Wall , including Removal of Deteriorated Plaster and Paint, Surface Preparation, Epoxy Pressure Grouting for Arresting Voids and Leakages, Removal of Injection Packers and Repair with Polymer-Aided Mortar, Treatment and Sealing of Expansion/Construction Joints with Backing Material, Polysulphide Primer and Sealant, Application of Crystalline Waterproofing Compound on Damp and Leaking Areas, Re-plastering with Premix Plastering Material, and Provision of Necessary Scaffolding and Staging up to 15 Metres Height. Providing and applying approved waterproofing compound of specified make and brand, strictly in accordance with the technical specifications, manufacturer’s recommendations and directions of the Controlling/Supervising Officer, including all materials, tools, plant, skilled labour, transportation, site handling and movement, surface preparation, application, curing and protection, complete in all respects. Chemical treatment shall be executed by engaging authorised applicators. (Payment shall be made on the basis of actual quantities of different items related to chemical treatment. Rates shall be based upon relevant PWD S.O.R and available market prices with analysis as per standard norms.)
39All items covering PWD, SOR, West Bengal (Bldg w.e.f 01.11.2017) including all corrigenda till 07.09.2022. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58410674
AUTHORITY Government Departments
TENDER VALUE 56.52 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name West Bengal State Electricity Distribution Company Limited
Work Description Tender for Painting Of Exterior And Interior Surfaces Along With Chemical Treatment Of Construction/Expansion Joints, Roof Treatment And Walls Of Power House Building At Power Station-I Of Tcfhp, Leusipukuri, District - Darjeeling.
Basic Detail
Tender No WBSEDCL/TCFHP/202627/17 Dt 05.11.2026
Bidding Type Tender
Location
City Darjeeling
State West Bengal
Key Dates
Publish Date 06 Nov 2026
Submission Date 25 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 56.52 Lakhs
Tender Fee Ref. Documents
EMD 1.13 Lakhs
Exemption Not Available
Document List
BOQ_2567499.xls
f8c179d0-cfb9-4dd1-a10f-a49dae5063f7.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2567499.xls

html

f8c179d0-cfb9-4dd1-a10f-a49dae5063f7.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender