Defence Statutory Bodies & Commissions/Committees Closing in 8 days TDR #58410521

Tender For special Repair To Electric Panel, Distribution Box Including Cabling At Osq Area And Certain Revenue Work Under Cijw School Vairengte

Issued by Statutory Bodies & Commissions/Committees · Kolasib, Mizoram
Tender Value
43.80 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
8 days left
EMD
87600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kolasib → Mizoram
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repair To Electric Panel, Distribution Box Including Cabling At Osq Area And Certain Revenue Work Under Cijw School Vairengte

BOQ

Name of Work:- SPL REPAIR TO ELECTRIC PANEL, DISTRIBUTION BOX INCLUDING CABLING AT OSQ AREA AND CERTAIN REVENUE WORK UNDER CIJW SCHOOL VAIRENGTE
Sl. No. Item Description
1B & R Division Items
2Excavating in trenches, n exc 1.50 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/ loose type of soil complete all as specified and directed.
3Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 30cm thick complete all as specified and directed.
4Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.
5M&L for Hardcore broken stone of gauge exc 40mm and n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed.
6M&L for PCC (1:4:8), Type D2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified and directed.
7M&L for 75 mm thick Plain cement concrete (1:3:6) type C-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface for receiving tile complete all as specified and directed.
8M & L for 40mm thick Plain Cement concrete type (1:2:4) type B-1, (12.5mm graded crushed stone aggregates) as in flooring etc using in alternate bars/4mm thick plastic diving strips, surface finish with steel trawel without using extra cement complete all as specified and directed.
9M & L for glass dividing strip 3mm thick 38mm wide use in Plain Cement concrete flooring complete all as specified and directed.
10Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed.
11Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and directed.
12Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed
13Use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.
14M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed.
15M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in column, pillars, piers, posts, and struts complete all as specified and directed.
16M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5m complete all as specified and directed.
17M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roof landig balconies, canopies, deck slab and shelves and like complete all as specified and directed.
18M & L for Mild Steel TMT Bar 10mm dia and over , cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
19M & L for Mild Steel TMT Bar 6mm to 8mm dia, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
20M & L for Mild Steel TMT Bar 6mm dia and over up to 10 mm dia as in stirrups, spacers and binders as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed
21M & L for brickwork with subclass 'B' straight or curved on plan exc 6 m mean raduis, built in CM (1:6) complete all as specified and directed.
22M & L for half brick work in cement mortar (1:4) straight or curved on plan to any radius with locally available Subclass ‘B’ old size best quality bricks all as specified .
23M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, with top 5mm layer mixed with WPC finished the surfaces even and fair complete all as specified. (Note :WPC measured separately).
24M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified.
25Supply only integral water proofing compound WPC complete all as specified.
26M & L reflective type rubber moulded chequered coloured cement concrete tile size 300mm X 300mm X 25mm thick, in floors, set, jointed & pointed with neat cement slurry with painted to match colour of tile laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed.
27S & F pre-painted galvalume aluminium zinc coating GI based corrugated/trapezoidal steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
28S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
29S & F Framed work such as grills, gratings, etc. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
30S & F structural steel work in tubular/hollow sections trusses , Purlin , posts, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as as specified and directed.
31S & F 30 mm thick Flush shutters, with block board core and plywood face panels, commercial type on both sides, smooth finish with lipping of teak wood on edges all as specified and directed.
32S & F 2 way track sliding anodized aluminium glazed ventilator shutter with frame consists of following specification all as specified & directed.(a) Ventilator frame 2 track of size 60mm × 25mm × 1.5mm thick.(b) Stiles and rails of size 35mm × 25mm × 1.5mm.(c) 35mm × 35mm × 1.5mm T section mullion.(d) PVC gasket with 4mm thick tinted glass, incl. aluminium handles with necessary locking arrangement.Note: Measurement to be taken as overall width and height of ventilator. No shutter or frame to be measured separately. All necessary accessories including tinted glass required for assembling and fixing window at proper place complete are deemed to be inclusive.
33S&F 100mm long stainless steel Butt hinges, with stainless steel screws complete all as specified.
34S & F 150 mm long extruded aluminium handles cast type complete all as specified & directed .
35S & F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
36S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.
37M & L for preparation of new or previously untreated ceiling surfaces and applying three coats of white wash complete all as specified and directed.
38Material and labour for applying two coats of cement base paint over one coat of primer on plastered surfaces of walls including preparation of new or previously untreated surfaces all as specified and directed
39Preparation of new steel surfaces surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces complete all as specified.
40M & L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
41E & M Division items
42M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty,concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for ceiling fan point controlled by one switch.
43M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One fan point/exhaust fan point controlled by one, one way switch .
44M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on the same board.
45M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on independent board.
46M & L for point wiring with FRLSH stranded copper conductor 2.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 2.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for 3 pin, 15 Amp socket outlet, independent
47S&F switch piano flush type button single pole one way 5 Amps all as specified and directed.
48S&F socket outlet 2 in 1, 3 pin 5 Amp flush type all as specified and directed.
49S & F switch socket combination 5 in 1, 5 Amp/16 Amp flush type with all as specified and directed.
50S & F ceiling rose surface bakelite with three terminals all as specified and directed
51S & F surface mounting batten tube light fitting 1X20 Watt (4 feet), integrated polycarbonate LED channel with white acrylic cover complete suitable for and including Lamp fixed properly on wall surface and connecting complete from ceiling rose to fitting by three core copper conductor cable of overall sheathed size 2.5 Sqmm which shall be passed through PVC flexible conduit complete all as specified and directed..
52S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.
53S&F bldg security light, LED luminaire 25 watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements complete all as per directed by Engr-in-charge.
54S & F plastic body exhaust fan 250mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces complete all as specified and as directed.
55S & F factory made distribution board sheet metal enclosures powder coated double door, Single pole and neutral (SPN) , 4 way double door with aluminum bus bar 100 Amp for fixing of MCBs including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.
56Dismantling of existing one and S & F factory made distribution board sheet metal enclosures powder coated double door, tripple pole and neutral (TPN), 6 way 415 volts fitted with bus bar DIN rail neutral link and incoming contact for fixing of MCCB complete all as specified and directed.
57Dismantling of existing one and S & F MCB TPN 63 Amps 415 volts 10 KA 'B'curve and current carrying capacity in the DB with connecting testing as per specification complete all as specified and directed.
58Dismantling of existing one and S & F MCB SP 40 Amps 230 volts 10 KA 'B'curve and current carrying capacity in the DB with connecting testing as per specification complete all as specified and directed.
59S&F MCB SPN of capacity 40-63 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed.
60S&F MCB SP of capacity 5-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed.
61Dismantling of existing GI earthing and M&L for plate earthing complete with galvanized mild steel plate electrode 600mm X 600mm X 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 metre deep below ground level) with the top edge of earth plate at a depth not less than 1.5 metre below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm in alternate layers on all sides and including GI earth strip of 25X4 mm as earth electrode bolted with GI nuts, bolts & check nuts and rivetted to earth (Plate) electrode at one end and connected to Panel at the other, earth strip protected by and incl GI pipe 40 mm dia (medium grade) from top of electrode to Panel and also incl watering pipe GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover with handle, funnel, wire mesh including necessary excavation & earth work, etc as shown on electrical plate No 3 of SSR Part I complete all as specified and directed.
62Dismantling of unserviceable LT Panel of any type/size including disconnection, dismantling and removal from site and Supply, Installing, testing and commissioning of LT Panel factory made Outdoor type (CPRI) as per latest IS mark with following minimum thickness - Load bearing member/Doors - 3mm, Non-load bearing member/internal partitions - 2mm, Glandplate/Base channel-3MM , board floor mounted, dust and vermin proof, 3 phase 4 wire with rated operational voltage 415V, rated insulation voltage of 1100V as per latest IS mark, weather proof, with separate hinge door for each compartment with Operating handle & locking arrangement with back door common openable(screwed /Lockable), grouted in PCC 1:2:4 Complete. Painting as per defined 7 Tank process with epoxy powder polymerized at high temperature and aluminium busbar (TPN) suitable for 450A with double compression aluminium cable glands with the following accessories with IP 53 rating :- (a) Incoming -(i) MCCB 250 Amp 4 pole 415 V 35 kA rating with Aerosoil system-01 Nos(ii) Onload Changeover 4 Pole 250 Amps 415V-01 Nos(b) Outgoing - (i) MCCB 160 Amp 4 Pole 415V 25 kA - 01 Nos(ii) MCCB 100 Amp 4 pole 415V 18 kA - 02 Nos(III) MCCB 63 Amp 4 Pole 415V 18kA - 01 Nos .(Iv) Spare compartment for MCB - 01 nos . (v) LED indicating lamps for main supply (R-Y-B)(vi) Amp meter (vii) Volt meter with selector switch(viii) Power Contractor(ix) Thermal Overload relay
63Dismantling of unserviceable LT Panel of any type/size including disconnection, dismantling and removal from site. and Supply, Installing,testing and commissioning of LT Panel factory made Outdoor type (CPRI) as per latest IS mark with following minimum thickness - Load bearing member/Doors - 3mm, Non-load bearing member/internal partitions - 2mm, Glandplate/Base channel-3MM , board floor mounted, dust and vermin proof, 3 phase 4 wire with rated operational voltage 415V, rated insulation voltage of 1100V as per latest IS mark, weather proof, with separate hinge door for each compartment with Operating handle & locking arrangement with back door common openable(screwed/Lockable), grouted in PCC 1:2:4 Complete. Painting as per defined 7 Tank process with epoxy powder polymerized at high temperature and aluminium busbar (TPN) suitable for 300A with double compression aluminium cable glands with the following accessories with IP 53 rating :- :- (a) Incoming - (i) MCCB 160 Amp 4 pole 415 V 25 kA rating-01 Nos (ii) Onload Changeover 160 Amp -01 Nos(b) Outgoing - (i) MCCB 125 Amp 4 Pole 415V 25 kA - 02 Nos.(ii) MCCB 63 Amp 4 Pole 415V 16 kA - 02 Nos(ii) SPN 16Amp - 01 Nos (iii) Spare compartment for MCCB - 01 nos . (iv) LED indicating lamps for main supply (R-Y-B)(v) Amp meter (vi) Volt meter with selector switch(vii) Contractor(viii)Thermal Overload relay
64Dismantling of unserviceable LT Panel of any type/size including disconnection,dismantling and removal from site. and Supply, Installing,testing and commissioning of LT Panel factory made Outdoor type (CPRI) as per latest IS mark with following minimum thickness - Load bearing member/Doors - 3mm, Non-load bearing member/internal partitions - 2mm, Glandplate/Base channel-3MM , board floor mounted, dust and vermin proof, 3 phase 4 wire with rated operational voltage 415V, rated insulation voltage of 1100V as per latest IS mark, weather proof, with separate hinge door for each compartment with Operating handle & locking arrangement with back door common openable(screwed/Lockable), grouted in PCC 1:2:4 Complete. Painting as per defined 7 Tank process with epoxy powder polymerized at high temperature and aluminium busbar (TPN) suitable for 300A with double compression aluminium cable glands with the following accessories with IP 53 rating :- :- (a) Incoming - (i) MCCB 125Amp 4 pole 415V 25 kA rating-01 No (b) Outgoing - (i) MCCB 125 Amp 4 Pole 415V Bus bar system with colour coding(ii) DP16Amp - 01 Nos (III) Spare compartment for MCCB - 01 nos . (iV) LED indicating lamps for main supply (R-Y-B)(V) Amp meter (VI) Volt meter with selector switch(VII) Contractor(VIII)Thermal Overload relay
65Dismantling of existing unserviceable GI pipe and M & L for 110 mm dia 3 layer PP-R SDR 7.4 (PN 16) UV stabilized and antimicroboal fusion for protection cable laying in trenches, footpath etc, including clamps, nut bolt and washers complete all as specified and directed
66Dismantling of existing unserviceable GI pipe and M & L for 90 mm dia 3 layer PP-R SDR 7.4 (PN 16) UV stabilized and antimicroboal fusion for protection cable laying in trenches, footpath etc, including clamps, nut bolt and washers all fitting as per site requirment complete all as specified and directed.
67Dismantling of existing unserviceable GI pipe and M & L for 63 mm dia 3 layer PP-R SDR 7.4 (PN 16) UV stabilized and antimicroboal fusion for protection cable laying in trenches, footpath etc, complete all as specified and directed including clamps, nut bolt and washers all fitting as per site requirment complete all as specified and directed.
68Taking out of existing unserviceable UG Cable of any size after disconnetion from LT panel/feeder pillar and poles and Supply, Laying and testing in trenches or fixing or passing through pipe, LT XLPE PVC Insulated multi stranded aluminium conductor cable served with an inner sheathing of PVC tape, armoured with galvanised steel wire or strip and over PVC sheathed of size 185 Sq mm 3-1/2 core 1100 volts grade heavy duty with copper cable glands & copper thimbles complete all as specified and directed.
69Taking out of existing unserviceable UG Cable of any size after disconnetion from LT panel/feeder pillar and poles and Supply, Laying and testing in trenches or fixing or passing through pipe, LT XLPE PVC Insulated multi stranded aluminium conductor cable served with an inner sheathing of PVC tape, armoured with galvanised steel wire or strip and over PVC sheathed of size 120 Sq mm 3-1/2 core 1100 volts grade heavy duty with copper cable glands & copper thimbles complete all as specified and directed.
70Taking out of existing unserviceable UG Cable of any size after disconnetion from LT panel/ feeder pillar and poles and Supply, Laying and testing in trenches or fixing or passing through pipe, LT XLPE PVC Insulated multi stranded aluminium conductor cable served with an inner sheathing of PVC tape, armoured with galvanised steel wire or strip and over PVC sheathed of size 50 Sqmm 3-1/2 core 1100 volts grade heavy duty with copper cable glands & copper thimbles complete all as specified and directed.
71Taking out of existing unserviceable UG Cable of any size after disconnetion from LT panel/feeder pillar and poles and Supply, Laying and testing in trenches or fixing or passing through pipe, LT XLPE PVC Insulated multi stranded aluminium conductor cable served with an inner sheathing of PVC tape, armoured with galvanised steel wire or strip and over PVC sheathed of size 35 Sq mm 3-1/2 core 1100 volts grade heavy duty with copper cable glands & copper thimbles complete all as specified and directed.
72Taking out of existing unserviceable UG Cable of any size after disconnetion from LT panel/feeder pillar and poles and Supply, Laying and testing in trenches or fixing or passing through pipe, LT XLPE PVC Insulated multi stranded aluminium conductor cable served with an inner sheathing of PVC tape, armoured with galvanised steel wire or strip and over PVC sheathed of size 25 Sq mm 4.0 core 1100 volts grade heavy duty with copper cable glands & copper thimbles complete all as specified and directed.
73Taking out of existing unserviceable UG Cable of any size after disconnetion from LT panel/feeder pillar and poles and Supply, Laying and testing in trenches or fixing or passing through pipe, LT XLPE PVC Insulated multi stranded aluminium conductor cable served with an inner sheathing of PVC tape, armoured with galvanised steel wire or strip and over PVC sheathed of size 16 Sq mm 4.0 core 1100 volts grade heavy duty with copper cable glands & copper thimbles complete all as specified and directed.
74Taking out of existing unserviceable UG Cable of any size after disconnetion from LT panel/feeder pillar and poles and Supply, Laying and testing in trenches or fixing or passing through pipe, LT XLPE PVC Insulated multi stranded aluminium conductor cable served with an inner sheathing of PVC tape, armoured with galvanised steel wire or strip and over PVC sheathed of size 10 Sq mm 4.0 core 1100 volts grade heavy duty with copper cable glands & copper thimbles complete all as specified and directed.
75Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 10 sqmm 4.0 core laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed.
76S & F LT straight through joint out door type suitable for 3.5 core 150 to 185 Sqmm PVC / XLPE power cables complete with all necessary jointing material,connectors,insulation,sealing arrangement all accessries as required complete all as specified and directed by Engr-in-Charge
77Providing and making horizortal/sloped boring under road and footpath for insertion of 63mm dia PPR SDP pipe for drawing of underground (UG) cable,including boring through 80mm bore GI pipe complete with all materials,labour,tools,plants and equipments, making good the surface and all other incidental works all as per specification and directed by the Engr-in-Charge
78Dismantling of existing and M & L for laying / topping up of 40 mm stone aggregate in switch yard/electric installations/ two pole/ four pole structure complete all as specified and directed at site by Engineer-in-Charge.
79Material & Labour for PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundation of LT panel including demolition of old PCC complete all as specified and directed at site by Engineer-in-Charge.
80Dismantling of existing and Material & Labour for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate as in coping of LT panel complete all as specified and directed at site by Engineer-in-Charge.
81Taking down Cement plaster on brick wall including raking out joints hacking for key scrubing down with water complete all as specified and directed at site by Engineer-in-Charge.
82Dismantling of existing and M&L for Brick work with sub class 'B'bricks in one brick striaght or curved on plan to any radius in half brick thick wall built complete all as specified and directed at site by Engineer-in-Charge.
83M&L for 10mm thick rendering in cement mortor 1:6 on other than fair faces of birck wall or concrete surfaces finished even one fair complete all as specified as per directed
84Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.
85Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.
86Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.
87M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection complete all as specified and as directed by Engineer -in-charge.Note : Thickness of sand cushioning after punning down will be measured.
88M & L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed by Engr-in-Charge Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58410521
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43.80 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair To Electric Panel, Distribution Box Including Cabling At Osq Area And Certain Revenue Work Under Cijw School Vairengte
Basic Detail
Tender No 8207A/E8
Bidding Type Tender
Location
City Kolasib
State Mizoram
Key Dates
Publish Date 06 Nov 2026
Submission Date 28 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value 43.80 Lakhs
Tender Fee 500
EMD 87600
Exemption Available
Document List
8207A-SchOfCreditformat.pdf
8207A-TP.pdf
BOQ_894729.xls
c668ad70-c13e-4528-9994-895ae5e5564b.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
pdf

8207A-SchOfCreditformat.pdf

pdf

8207A-TP.pdf

xls

BOQ_894729.xls

html

c668ad70-c13e-4528-9994-895ae5e5564b.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender