Tender For Special Repair Of Bldg No P-26/10/01 To 04 (Md Accn) At 7 E Area And Provn Of Bathroom And Store At Papps School At Mil Stn Pithoragarh Under Ge (Mes) Pithoragarh
Tender Value
42.36 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
18 days left
EMD
84800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Bldg No P-26/10/01 To 04 (Md Accn) At 7 E Area And Provn Of Bathroom And Store At Papps School At Mil Stn Pithoragarh Under Ge (Mes) Pithoragarh
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 4 | Demolition of reinforced cement concrete in any position not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 5 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 6 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed. |
| 7 | Taking down shutter of any description exc 1 Sqm but not exc 2.0 Sqm each complete all as specified and directed. |
| 8 | Dismantling floor ,hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed . |
| 9 | Providing cement concrete 25 mm thick type B-0 (1:2:4) using 12.5 mm graded agg as in sub base to flooring. |
| 10 | M & L,non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match and including Dismantling of existing floor ,hearth or wall tiling complete all as specified and directed |
| 11 | M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match and including Dismantling of existing floor ,hearth or wall tiling complete all as specified and directed |
| 12 | M & L, glazed joint free coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed. |
| 13 | M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed. |
| 14 | . -ditto- as per item above but in cm 1:4 (external surfaces) |
| 15 | M&L for 10 mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection etc complete all as specified and directed. |
| 16 | M&L for applying two coat OBD on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed. |
| 17 | M&L for complete removal of existing treatment using mechincal device and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed |
| 18 | M&L for applying two coat OBD on newly plastered ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed. |
| 19 | M&L for complete removal of existing treatment using mechincal device and applying of two coat OBD on ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed |
| 20 | M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed.. |
| 21 | M&L for complete removal of existing treatment using mechincal device and applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on old plastered wall with airless electric sprayers after prepearing old surface applied using airless electric sprayers sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed.. |
| 22 | Providing and applying plaster of paris putty of 1 mm thickness over plastered surface of wall/ceiling to prepare the old /new surface even and smooth complete all as specified and directed. |
| 23 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door frame/chowkat of size 125x63 comprising of virgin PVC polymerof K value 58-60 (suspension Grade), Calcium Carbonate and natural Fibers (wood Powders/rice husk/wheat husk) and Non toxic additives (maxtoxicity index of 12 for 100 gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body treaded star headed SS screws having min frame density of 750 kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge, miniumum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance tto spread of flame of class ‘A’ category with property of being termite /borer proof, water/moisture proof & fire retardant & fixed in position with SS dash fasterns/hold fast of required dia and length, colour of door frame to match that of shutter all as specified and directed. |
| 24 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door frame/chowkat of size 100x50 comprising of virgin PVC polymerof K value 58-60 (suspension Grade), Calcium Carbonate and natural Fibers (wood Powders/rice husk/wheat husk) and Non toxic additives (maxtoxicity index of 12 for 100 gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body treaded star headed SS screws having min frame density of 750 kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge, miniumum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance tto spread of flame of class ‘A’ category with property of being termite /borer proof, water/moisture proof & fire retardant & fixed in position with SS dash fasterns/hold fast of required dia and length, colour of door frame to match that of shutter incl SS hinges all as specified and directed. |
| 25 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed. |
| 26 | S&F factory made single extruded WPC (Wood Polymer Composite) solid moulded flush door shutter pre-laminated both side of 30 mm size comprising of virgin PVC resin of K value 58-60 (suspension Grade), Calcium Carbonate and natural Fibers (wood Powders/rice husk/wheat husk) and Non toxic additives (maxtoxicity index of 12 for 100 gms) having min density of 650 kg/Cum and screw withdrawal strength of 1800 N ( Face) & 900 N (edge) Minimum Compressive strength of 50 N /mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/Borer proof, Water/Moisture Proof, Fire retardant and including with fixing stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer-in-Charge, Material test certificate and authenctication sould be complosory provided by the manufacturing company. |
| 27 | S&F for 30 mm thick factory made solid WPC (Wood plastic Composite) gauged door shutter with wire mesh in three number of division with brown wood gain texture, wire mesh fixed with (15 x 15) mm square tubes in side rails with screwing 8 x 28 heat metal zinc coated screws that can be removed or fixed again after changing of wire mesh when needed covered with moulded beading. The density of the WPC material shall be as per manufacturer instruction. Complete all as specified and directed. |
| 28 | S&F, solid WPC door frame of size 63mm x 50 mm with decorative laminates in opening of Cup Board as per specification incl SS hinges complete all as specified and directed by Engr-in-charge. |
| 29 | S&F 18-20 mm thick factory made solid PVC flush Kitchen CB shutter /shutter ,uPVC ,made from co-extruded three layer rigid foam sheet (single extruded process ) with 0.8 to 1mm thick outer face layer having density not less than 1400 kg /cum and density of central core material not less 600 kg/cum , manufactured by an ISO 9001:2015 certified company and fixing in frame at site with and including 03 nos S S hings, 02 Nos S S fancy handle ,02 Nos S S tower bolt, Ball catches with 8mm dai steel ball and brass body and striding plate including letting and inbuilt lockin divice with Key etc for Cup Board / Kitchen cabinets as per specification & drawing complete all as specified and directed Engr-in-charge. |
| 30 | S&F Aluminium annodised barrel tower bolt of extruded section and fixed 200 mm size with bright bolt complete all as specified and directed. |
| 31 | S&F extruded Aluminium alloy handle fabricated annodised 150 mm size, complete all as specified and as directed . |
| 32 | S&F 300 mm long aluminium alloy annodised slidding door bolt with hasp and satple (bolt type) and fixing clips of sheet castor extruded sections and fixing bolts and slidding bolts of extruded section or cast aluminium alloy and fixed all as spd and directed |
| 33 | S&F MS 300 mm brass ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed . |
| 34 | S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed |
| 35 | M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 36 | M&L, preparing old previously treated surface of wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on old decorated wooden surfaces, complete all as specified and directed. |
| 37 | S&F uPVC casement window with net & grill single of multi shutter turn window are made out of multi-cavity frame sections of 60x60x2.5mm suitable reinforced and double multi shutters division are made by using sash mullion having 50x64x2.5mm multi-cavity uPVC section, suitably GI reinforced and shutters will be made from uPVC section of size 50x85x2.5mm, reinforced and welded in corners with EDPM gasket, provision for glass and for air tight at frames and outer side of shutters with style glazed window shutter with and including suitable size glass beading, hinges, handles, stay etc complete. Mosquito mesh shutter shall be made from UPVC extruded section of size 61x27x2mm with GI channel of 1.2mm thick, welded in corners, mosquito net shall be of fibre be fitted in shutter with proper required accessories like hinges, MS grill of 12mm round pipe be inserted in main frame & screwed by hidden screwing system with powder coating etc, complete all as directed. (glass & wire net measured and paid seprately) |
| 38 | Supply and Fixing sheet glass 4-5mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 39 | S&F 3-4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane including Hacking out old broken glass ( any thickness, size, quality or description) frame metal frames or fixed with beads complete all as specified and directed. |
| 40 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 41 | S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed . |
| 42 | M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 43 | M&L, preparation old previously treated steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on the steel surfaces, complete all as specified and directed. |
| 44 | S&F factory made single extruded WPC (Wood Polymer Composite) solid moulded flush door shutter pre-laminated both side of 28-30 mm size comprising of virgin PVC resin of K value 58-60 (suspension Grade), Calcium Carbonate and natural Fibers (wood Powders/rice husk/wheat husk) and Non toxic additives (maxtoxicity index of 12 for 100 gms) having min density of 650 kg/Cum and screw withdrawal strength of 1800 N ( Face) & 900 N (edge) Minimum Compressive strength of 50 N /mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/Borer proof, Water/Moisture Proof, Fire retardant and including with fixing stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer-in-Charge, Material test certificate and authenctication sould be complosory provided by the manufacturing company. |
| 45 | S&F factory made 100% solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing as incl SS hinges directed by Engineer-in-charge. |
| 46 | S&F, aluminium, anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed. |
| 47 | S&F , butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed. |
| 48 | S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 49 | M&L, 18 to 20 mm thick Green Marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding exposed edges complete all as specified and as directed. |
| 50 | Providing cement concrete 75 mm thick type D-2 (1:4:8) using 40 mm graded agg as in sub base to flooring. |
| 51 | S&F non skid tiles, exterior grade, chequered/grooved pattern of size 600x600mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed. |
| 52 | M&L for RCC (Nominal mix)Type 1:2:4 type B-1 as in Slabs supported on walls,beams and columns in floors,roofs,chajja, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 53 | Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed. |
| 54 | M&L for TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed. |
| 55 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 56 | M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed. |
| 57 | M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 58 | Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed. |
| 59 | Supply & Fix GI powder coated snap grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length complete all as specified and as directed :- (i) main tee of size -32mmx24mmx0.3mm (ii) cross tee of size -26mmx24mmx0.3mm (iii) wall angle - 24mmx24mmx0.3mm |
| 60 | S & F 4 mm thick E-Board classic for, 595 x 595 mm size fixed with staples on snap grid as in ceiling complete all as specified and as directed. |
| 61 | S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed. |
| 62 | M & L, cement concrete 1:2:4 type B-2, using 40 mm graded stone aggregate as in surface channel or drain complete all as specified and directed. |
| 63 | M & L, forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed. |
| 64 | S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe. |
| 65 | S&F in repairs Stop valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe. |
| 66 | S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. |
| 67 | S&F in repair vitreous china squatting pan, orrisa pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including making good to disturbed floor with PCC complete all as specified and directed. |
| 68 | S&F in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed |
| 69 | S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete. |
| 70 | S&F in repair 1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling complete all as specified and directed |
| 71 | S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required and connections complete complete all as specified and directed |
| 72 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 73 | Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed |
| 74 | S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required incl taking down 20 mm bore steel tubing and connections complete complete all as specified and directed |
| 75 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 76 | Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed |
| 77 | S&F 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed. |
| 78 | S&F Oval type Wash Hand Basin superior quality 550 x 400 mm size fitted and including 15 to 18 mm thick granite top over RCC slab incl waste coupling 150mm long complete all as specified and directed. |
| 79 | S&F 32mm bore bottle trap of of PTMT having minium water seal of 25mm ( minimum weight 32mm-260gms) complete all as specified and directed. |
| 80 | S&F 50mm PVC (SWR) pipes single socket in any length and including bends and sockets complete all as specified and directed |
| 81 | S&F in repair, Brass CP wash basin mixer(long nose)15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed all as specified and as directed. |
| 82 | S & F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed. |
| 83 | S&F 5mm thick glass shelf/mirror self of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed |
| 84 | S&F in repair 6mm thick glass corner shelf assembly fancy type size 250mmx250mmfixed with and including chromium plates brass screws and wooden /plastic cleats complete all as specified and directed |
| 85 | Supply & Fix in repair 600 mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed. |
| 86 | Supply & Fix in repair 15 mm bore Stop valves cast copper alloy chromim plated fancy type with long shank and cup (concealed type) screwed down , high pressure ,screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 87 | Supply & Fix in repair Brass chromium plated shower rose 125mm size with or with out swivel joint fixing to steel pipe or for unions complete all as specified and directed. |
| 88 | S & F in repair Soap dish vitreous china white , approximate size 160x160x90mm fixed to plugs with brass screws and wooden/ plastic cleats complete all as specified and directed. |
| 89 | S & F in repair PVC cabinet mirror size 350mm x 450 mm fixed with steel screws with rowel plug complete all as specified and directed |
| 90 | Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed. |
| 91 | S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed. |
| 92 | S&F in repairs, 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed. |
| 93 | S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 94 | S&F in repairs, 110mm bore PVC(SWR) bends any radius, complete all as specified and directed. |
| 95 | S & F PVC (SWR) junction single,(Single T) equal or unequal 75 mm dia |
| 96 | S &F PVC (SWR) 75 mm dia vent cowl |
| 97 | Supply & Fix in repair 110 mm bore PVC(SWR) door bends any radius provided with access door complete all as specified and directed. |
| 98 | Supply & Fix in repair 110mm PVC (SWR) reducers complete all as specified and directed. |
| 99 | S&F Sinks made of stainless steel 1mm thick kitchen with plugs washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x420mm bowl size 410mm x 330mm x160mm ,including cupling , west pipe etc complete all as specified and directed. |
| 100 | S&F kitchen plate rack of stainless steel of size 720mm x 600mm x 230mm made out of 1mm thick steel sheet complete all as specified and directed. |
| 101 | S&F PVC cabinet mirror size 350mm x 450mm fixed with steel screw with rowl plug complete all as specified and directed. |
| 102 | S&F in repair 40 mm waste coupling of PTMT(Half of full threaded ) (Minimum weight 32mm-45 gms/40mm-60 gms) sutable of steel sink including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed |
| 103 | M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finisheed even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction. |
| 104 | Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed. |
| 105 | M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed . |
| 106 | M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work complete all as specified and as directed. |
| 107 | Supply only water proofing compound ,complete all as specified and as directed |
| 108 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed |
| 109 | S&F decorative curtain rod made of MS pipe covered with coloured PVC layer dia of rod 25 mm with decorative ends complete all as specified and as directed. |
| 110 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 111 | M & L for providing precast cement concrete bonders (for stone walling) type B1 (1:2:4) using 20 mm graded stone aggregate, set in Cement mortar 1:6 complete all as specified and directed |
| 112 | M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed |
| 113 | M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed |
| 114 | Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed. |
| 115 | M & L for providing cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate, as in coping ,(50 mm thick ) bed blocks including necessary form work complete all as specified and directed |
| 116 | M&L for raised pointing to randam polygonal rubble, uncoursed or brought upto courses in Cement mortar (1:4) complete all as specified and directed. |
| 117 | Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in hard soil complete all as specified and directed. |
| 118 | Returning, filling in, earth including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed. |
| 119 | Removing excavated material n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point. |
| 120 | Demolition and breaking up drain pipes (Salt glazed ware ,AC or reinforced concrete ) det in cement mortar internal dia of pipe in 150mm to 200mm dia |
| 121 | M&L for 200 mm dia reinforced concrete pipes, class NP2 with one collar per length of pipe complete all as specified and as directed . |
| 122 | M&L for concrete bed to 200mm drain pipes including forming cradles in PCC 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and as directed . |
| 123 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete,incl removing excavated material nexc. 50 m and depositiong where directed all as specified and as directed. |
| 124 | M&L for providing cement concrete type C-2, 1:3:6 ( using 40mm graded aggregate) as in foundation, filling and mass concrete. |
| 125 | M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting and spot welding etc and similar work conforming to Fe-290 Gde E-165. |
| 126 | M&L for roof trusses (framed), trussed,purlins, bracing,crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc |
| 127 | S&F mild steel works as in wind ties for roof incl securing bolts; posts and struts in fencing incl cutting tops to shape as directed ,drilling holes,notching for wire,etc;flat iron fillets (for securing wire mesh etc) incl all necessary drilling,bolting or riveting etc and similar work conforming to Fe 410-0 or Fe 310-0 upto any height of bldg complete all as specified and directed. |
| 128 | M&L for preparation of new steel surfaces of any description not exc 10 cm width or girth, not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer complete. |
| 129 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built inbuilt in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 130 | M&L for rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finished the surface enen and smooth without using extra cement complete all as specified and directed |
| 131 | M&L for preparation of new surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camoflage pattern, as per manufactures instructions etc complete all as specified and as directed. |
| 132 | M&L for 40 mm thick PCC(1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base of floor etc |
| 133 | M&L for 8-10 mm thick Vitrified ceramic tiles, light shade (square/recangular) area of each tile exceeding n. 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed |
| 134 | M&L for outdoor coloured industrial textured surfaces with high skid resistance ,scratch resistance,impact resistant,joint free(edge cut) of size 300mm x 300mm x 8-10mm thick as in floor etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6,set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.. |
| 135 | S&F mild steel farmed work as in doors or ckowkats or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-290 including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed. |
| 136 | S&F MS hold fast and similar article conforming to Fe-290 Gde-E-165-0 or Fe-310-o all specified and directed |
| 137 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 138 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing |
| 139 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete |
| 140 | S&F 150 mm long stainless steel finished barrel tower bolt of extruded section complete all as specified and as directed |
| 141 | S&F 100 mm long stainless steel finished barrel tower bolt of extruded section complete all as specified and as directed |
| 142 | S&F 150 mm long stainless steel finished handle fabricated type complete all as specified and as directed |
| 143 | S&F 100 mm long stainless steel finished handle fabricated type complete all as specified and as directed |
| 144 | S&F SS sliding door bolt, 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed |
| 145 | S&F stainless steel finished butt hinges cold rolled medium weight of size 75 mm complete all as specified and as directed |
| 146 | S&F repair butt hinges, medium weight, cold rolled SS, 100mm size complete all as specified and as directed |
| 147 | S&F Powder coated aluminium anodised frame for doors with one or more rebates including joining cleat for fixing etc complete all as specified and directed. (minimum thickness of powder coating 50 micron) |
| 148 | S&F powder coated aluminium anodised door shutters, aluminium section weighing 0.55 kg/m including necessary aluminium anodised joining cleats, glazing clips, ruber neoprene packing, aluminium anodised handles 2 Nos in each door, aluminium anodised hinges 03 No's, aluminium anodised Tower bolt 02 No's, Powder coated aluminum snap beading, screws etc,01 No's door closer on each sutter,01 No's mortice lock verical type ,incl min 5mm thick glass in upper part and 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations.complete all as specified and directed. (Minimum thickness of powder coating 50 micron) |
| 149 | S&F in repair 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations for partition etc, complete all as specified and as directed. |
| 150 | M&L for powder coated (any colour) anodized aluminium (sliding type) windows/ventilator with two track bottom track size 92X29.5X2mm thick side and top track frame size 92X29.5X2mm and shutters powder coated aluminium anodized 39X20X2 mm thick (01 of glass and 01 of SS wire cloth) including necessry aluminium fittings like joint cleat glazing and gauging clips/strips and rubber packing anodized aluminium snap beading screws etc with 5mm thick tinned glass/SS wire mesh with etc including all fittings & fixture. |
| 151 | S&F false ceiling at all heights with semi perforated 12 mm thick micro tegular edged GRG(Glass fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%,humidity resistance of 99% ,NRCO 50 to 0.75 as per IS 8225:1987 ,Noncombustible as per BS 476 (part -40 1970and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000 mm ,cross-T of size 15 x32 mm of length 1200 mm and secondaryintermediate cross- T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @80 grams per sqm) i.e 50mm long,8mm outer diameter,M-6 dash fateners,6mm dia fully threaded hangar rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm.Galvanized iron perimeter wall angle of size 24 x 24 x 0.40mm length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws .The work shall be carried out as per specifications,drawing and as per direction of the Engineer-in-charge. |
| 152 | M & L for Reinforced cement concrete 1:2:4 using 20 mm graded stone aggregates as in foundations, in-cluding rafts, footings, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete incl framework and necessary excavation complete all as specified. |
| 153 | Material and labour for Mild steel TMT bars, 10 mm dia and over , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified. |
| 154 | S&F 18mm thick WPC (Wood Polymer Composite) of minimum density 600kg/cum both side plain for kitchen cabinet shutter ,cupboard,racks including fixing of 0.8mm thick acrylic laminates as edge banding in matching colour over all exposed edge complete incl SS handles,hinges and all connected assesories all as specified and as directed. |
| 155 | S&F Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipecomplete all as specified and directed. |
| 156 | S&F gratings of 150mm dia made of stainless steel with waste hole complete all as specified and directed |
| 157 | S&F gratings of 100mm dia made of stainless steel complete all as specified and directed |
| 158 | S&F looking mirror of size 600mmx450mm,bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washer etc complete all as specified and directed |
| 159 | S&F Chromium plated Health Faucet for bore size 15mm (flexible tube and hand shower) ,wall mounting type suitable for EWC; with CP nuts and washer incl square hook ABS , of length 900mm complete all as specified and directed. |
| 160 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 500 ltrs capacity with & including 20mm dia PTMT float valve complete all as specified and directed. |
| 161 | S&F in repair wash basin waste coupling 32 mm dia of CP (half or full threaded) Minimum weight 45gms complete all as specified and directed. |
| 162 | S & F in repair bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed |
| 163 | S&F in repair chromium plated Toilet paper holder incl movable flap and fixed to walls with chromium plated brass screws complete all as specified and directed. |
| 164 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and removing material for taking credit (credit for material should be made as per condition sepretly) |
| 165 | Point wiring of one light point/fan/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size min 20 mm dia or higher with all fittings (ISI Marked) controlled by one switch including GI modular sunken box of thickness not less then 1.2 mm with cover frame(Inner/Outer) for mounting modular type switches, socket and regulators , including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified. |
| 166 | All as per item No-164 here -in- before but forOne 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one , one way 05/06 Amps switch |
| 167 | Point wiring of one light point controlled by Two way switches with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size min 20 mm dia or higher with all fittings (ISI Marked) controlled by one switch including GI modular sunken box of thickness not less then 1.2 mm with cover frame(Inner/Outer) for mounting modular type switches, socket and regulators , including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified. |
| 168 | Point wiring for one 3 pin 15A socket outlet independent with 4.00 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 4.00 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in incl PVC conduit medium grade of 20 mm dia or higher with all fitting (ISI marked) .all as required at site or directed. |
| 169 | Point wiring for one 3 pin 5/15A socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in incl PVC conduit medium grade of min 20 mm dia or higher with all fitting (ISI marked) .all as required at site or directed. |
| 170 | Point wiring for one 5A socket outlet on the same board with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl PVC conduit medium grade of min 20 mm dia or higher with all fitting (ISI marked) .all as required at site or directed. |
| 171 | S&F in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 6 Sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade 25 mm dia or higher cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed. |
| 172 | S&F of switch modular type single pole two way 1 module 6 amps 240 volts. |
| 173 | S&F of switch modular type single pole one way 1 module 6 amps 240 volts. |
| 174 | S&F of switch modular type one way 1 module 16 amps 230 Volts. |
| 175 | S&F of socket 6 amps modular type 2/3 pin combined 2 module , 230 volts. |
| 176 | S&F of socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts. |
| 177 | S&F for ceiling rose surface bakelite 3 terminals. |
| 178 | S&F Lamp holder insulated body with back plate for dome batten fittings. |
| 179 | S&F of Modular type Electronic fan regulator stepped type,two module with five step 240 volts,100Watt suitable for 1200/1400 mm sweep AC ceiling fan complete, all as directed by Engineer in charge. |
| 180 | S&F of bell push AC SP 240 volts flush type 5/6 Amps, single pole one way complete as all specified and directed. |
| 181 | S&F of bell electric multi music type / AC SP 240 Volts Complete all as specified and directed. |
| 182 | Taking down Ceiling/Exhaust Fan any Sweep any type ,from the exsisting site and keep safe and under custody and complete cleaning, Oiling ,Greasing , repair to make fan seveciable with replacement of capacitor / PCB , bearing and nuts washets bolts and clamps of fan and hanging rod of any size/ length and Refixing fan as existing location and connection to celing rose with copper wire twin core complete all as specified and directed. |
| 183 | S&F of Tube light fitting integrated type suitable for LED 20 W(4 feet) efficacy min 100 lumens/watt, indoor decorative LED batten complete with Aluminium housing and all accessories pre wired and making connection with cord flexible copper cable of suitable size from ceiling rose to PVC connection to light fitting complete all as specified and directed. |
| 184 | S&F of Tube light fitting integrated type suitable for LED 10 W (2 feet) efficacy min 100 lumens/watt, indoor decorative LED batten complete with Aluminium housing with all accessories pre wired and making connection with cord flexible copper cable of suitable size from ceiling rose to PVC connection to light fitting complete all as specified and directed. |
| 185 | S&F of LED Bulb 9 W all as specified and directed. |
| 186 | S&F of LED bulk head fitting with opal diffuser min 10 Watt, 6500 K, IP-65, with Aluminium housing of efficient heat dissipation and integrated electronic driver with surge protection complete connecting electrically all as directed. |
| 187 | Supply and fixing LED street light fitting 35/36 Watt 230 V AC, in multiple optics,Outdoor type with high pressure die cast aluminum housing, IP-65, with 4 KV inbuild surge protection driver and heat resistant complete with driver, fixing the same by GI pipe medium grade minimum 25 mm dia bore pipe with two nos FI clamps of 40X4 mm duly painted and suitable size of nut and bolts etc and making poper electric connection with three core flexible copper wire complete all as specified and directed. |
| 188 | S&F in replacement of modular type 3/4 module power unit with 16 Amp plugtop Box with sheet steel enclosure MCB Combo plug and socket complete with one SP MCB 20 Amps, 240 Volts. Protection to human shock due to direct or indirect contact as well as provides protection from overload and short circuit faults, all as specifed and direced. |
| 189 | S&F in replacement of TPN DB, 4 Way, as per IS-8523, IP-42 protection, universal mounting with 200A copper bus bar with neutral bar, earth bar and cable ties for cable management, top and bottom removable gland plate suitable for MCB TPN as incomer and MCB TPN/MCBs as outgoing, with and including provision for MCCB/MCBs & making necessary electrical connection for Incoming & outgoing cables, with copper lugs, crimped with crimping tool |
| 190 | S&F in Repalcement of MCB C- Curve of four pole TPN, 415 Volts, 100 Amp ultimate breaking capacity (Icu)-10 KA. |
| 191 | S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification . |
| 192 | S&F in replacement of MCB SP of 6 to 32 Amp rating 240,10 KA C- curve with connection testing and commisioning. |
| 193 | S&F in replacement of MCB DP SPN of 40-63 Amp rating 240,10 KA C- curve with connection testing and commisioning. |
| 194 | M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion. |
| 195 | Supply install and tesing water heater storage type (Geyser) single phase 230 V, 50 Hz, 5 star energy saving high density PUF insulation tank made of heavy duty mangesium anode rod with steel core to protect enamelled tank from rust & corrosion, vertical installation type 25 Ltr Cap 2000 Watt rated power, incoloy 800 glass coated heating element, inner tank coating of feroglas powder, tank made of ultra thick super cold rolled steel plates, rated pressure 0.8 MPa, IPX4 protection consist of safety valves, thermal cut off, thermostat including connecting up and fixing arrangement on wall including providing hole fastners-04 Nos hot and cold water metallic flexible pipes 15 mm bore of adequate length as provided by OEM or required at site - 02 Nos non return valve 01 No and including necessary plumbing work, complete with intergated shock safe PRCD plug with all protection features as per OEM design and standard all as specified and directed.Note: Old Unsv Storage tank will be deposited to MES Yard. |
| 196 | Supply and fix Exhaust fan made of sturdy Engineering Plastic , PVC Body 250 mm sweep,AC single phase 230 V 50 Hz AC 1400 RPM energy saving, heavy duty motor copper wounded with die cast aluminium rotor mounted on two ball bearing complete with louvrs shutter including making hole of suitable size and making good disturbed surface (including making hole and plasterng, nacessary brickwork and distemparing to match with existing) connecting with 3 core copper cable to ceiling rose. All as specified and directed . Note: Old Unsv Item will be deposited to MES Yard. |
| 197 | Supply and fix Exhaust fan , steel body AC single phase 230 V of size 300 mm sweep single phase 230 V 50 Hz AC 1400 RPM energy saving, heavy duty motor copper wounded with die cast aluminium rotor mounted on two ball bearing complete with louvrs shutter including making hole of suitable size and making good disturbed surface (including making hole and plasterng, nacessary brickwork and distemparing to match with existing) connecting with 3 core copper cable to ceiling rose. All as specified and directed .Note: Old Unsv Item will be deposited to MES Yard. |
| 198 | Supply and fixing factory made epoxy powder coated Distribution board SPN 4 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper tinted bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and confirming to IS : 8623. |
| 199 | S & F 1x60 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing on GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed. |
| 200 | Supply laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cables (heavy duty) with stranded aluminium copper conductor , 1100 volts grade of size 2 core 6 Sqmm complete all as directed by Engineer-in-Charge. |
| 201 | M&L local sand dry, filling in trenches around under ground cable complete all as specified and directed. |
| 202 | M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed. |
| 203 | Supply and fixing GI pipe light grade 40 mm bore for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender