Water Resources and Irrigation Government Departments Closing in 4 days TDR #58410391

Tender For Installation And Energisation Of Pandarapali-I And Samaleichuan-Ii L.I. Project Under Dunguripali Block In Subarnapur District (Bkvy Ridf 2026-27 )

Issued by Government Departments · Sonepur, Odisha
Tender Value
68.57 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
4 days left
EMD
68579
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sonepur → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Installation And Energisation Of Pandarapali-I And Samaleichuan-Ii L.I. Project Under Dunguripali Block In Subarnapur District (Bkvy Ridf 2026-27 )

BOQ

Name of Work:- Installation and Energisation of PANDARAPALI-I and SAMALEICHUAN-II L.I. Project under DUNGURIPALI Block in SUBARNAPUR District (BKVY RIDF 2026-27 )
Sl. No. Item Description
1Earthwork in excavation of foundation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels etc within 50m.Initial lead and 1.5m. Initial lift including rough dressing and levelling the bed and depositing the excavated materials within initial lead at nearby the worksite for reuse including breaking clods and stacking rubble for spreading and leveling as the case may be etc complete as per direction of the Engineer-in-charge. (Excavation by mechanical means 60% & manually 40%)
2Filling in F&P with excavated materials in layers not exceeding 0.30m including breaking clods within 50m. initial lead including leveling the tranches as the case may be etc complete as per direction of the Engineer-in-charge.(Quantity by means of Mechanical 60% & mannually 40% i.e. of respective item No. 1 above)
3Earth work excavation of foundation in hard soil within initial lead of 50m & lift of 1.5m including dressing and levelling the bed etc.as direction of Engineer-in-charge
4Filling in F&P with excavated materials including well watered and rammed.(2/3 of respective earth work) as direction of Engineer-in-charge
5Filling F and P with sand, well watered and rammed as direction of Engineer-in-charge
6Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal (Crusher Broken) as direction of Engineer-in-charge
7RCC/Cement Concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) as direction of Engineer-in-charge
8Flyash. Brick masonary in cm(1:6) in foundation and plinth (25cm X 12cm X 8cm size) as direction of Engineer-in-charge
9Flyash Brick masonary in cm(1:6) in Superstructure work ( 25cm X 12cm X 8cm size ) as direction of Engineer-in-charge
1012mm thick Cement plaster in CM (1:6) over brick work as direction of Engineer-in-charge
11Cement punning over plastering as direction of Engineer-in-charge
12Rigid smooth centering shuttering for R.C.C. work including all cost etc. complete Column, Landing Balcony, Projection .etc.as direction of Engineer-in-charge
13Rigid smooth centering shuttering for R.C.C. work including all cost etc. complete in Column base etc.as direction of Engineer-in-charge
14Rigid smooth centering shuttering for R.C.C. work including all cost etc.Plinth Bend Lintel roof slab chajja etc.as direction of Engineer-in-charge
152.5 cm. thick A.S flooring with cement concrete (1:2:4) including punning using 12mm size C.B. chips including at cost etc. complete .as direction of Engineer-in-charge
16Supplying of M.S. reinforcement for R.C.C. work including cutting bending, binding & typing the grills & placing in position including cost of binding wire & reinforcement 18 to 20 guage per Qntl..as direction of Engineer-in-charge
17Painting two coats with approved paint on steel.as direction of Engineer-in-charge
18Cost of pump chamber wiring with all cost of wiring materials, labour etc complete.as direction of Engineer-in-charge
19Distempering two coats to walls with distermper of approved shade on new work to give an even shade etc.as direction of Engineer-in-charge
20Finishing walls with water proofing cement paint of approved shade on new work ( 2 coats ) to give an even shade etc complete etc.as direction of Engineer-in-charge
21Cost of M.S. Pannel Iron Door with M.S.Frame etc including fixing ( 1.00 X 1.80)etc.as direction of Engineer-in-charge
22cost of M.S. Pannel Iron window with M.S.Frame etc including fixing ( 0.90 x 0.75)etc.as direction of Engineer-in-charge
23Cost of outlet etc.as direction of Engineer-in-charge
24Labour charges for writing reqd. data & information on the Brick pillar etc.as direction of Engineer-in-charge
25Cost of 300 mm R.C.C. hum pipe( NP 3 )as per specifications including laying & fitting etc.as direction of Engineer-in-charge
26Cost of 160 mm Ø HDPE Pipe PE -80 PN-4,Supplying of ISI marked High Density Polythelene (HDPE) Pipes for water supply as per IS 4984/2016 in the following Nominal diameter, Grades of materials, Pressure rating including the rates of ex-factory, transportation, pre & post inspection, Cess etc complete .as direction of Engineer-in-charge
27Labour charges for laying , fitting , Jointing & testing of 160 mm Ø HDPE pipe PE-80,PN4 etc.as direction of Engineer-in-charge
28Cost of 200 mm ØHDPE PE 80-PN-4, Supplying of ISI marked High Density Polythelene (HDPE) Pipes for water supply as per IS 4984/2016 in the following Nominal diameter, Grades of materials, Pressure rating including the rates of ex-factory, transportation, pre & post inspection, Cess etc complete as direction of Engineer-in-charge
29Labour charges for laying , fitting , Jointing & testing of 200 mm Ø dia HDPE pipe PE-80,PN4 etc.as direction of Engineer-in-charge
30Cost, supplying of 160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc.as direction of Engineer-in-charge
31Cost of 200 mm x200 mm x160 mm Ø spigot moulded reducing HDPE Tee 10kg ISI mark of reputed company including all cost, conveyance, cess etc complete as direction of Engineer-in-charge
3215HP/11.25 KW Energy efficiency Monoblock pump set of total head 24 mtrs having discharge 1700 LPM with squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \\"F\\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery= 100mmx100mm with BEE 3 Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares confirming to IS specification(a) Casing: FC 200 as per IS 210/1978 (b) Impeller: Bronze grade LTB-2 of IS 318/1981 including all cost, conveyance, cess etc complete etc.as direction of Engineer-in-charge
33Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp reputed brand of ISI specification including all cost, conveyance, cess etc complete as direction of Engineer-in-charge
3463 AMP Triple Pole Mainswith confirming to IS No.4064(Part I & II) with ISI marking of reputed company having utilisation capacity cagegory AC- 22 reputed brand of ISI specification including all cost, conveyance, cess etc complete as direction of Engineer-in-charge
35Empty Outdoor Irrigation Pannel Board size (0.45mtx0.25mtx1.20m of 18 SWG Cold Rolled M.S Sheet with 4 legs of 300 size with one coat of Red Oxide Primer and two coats of Smoke grey /Navy blue two coats of powder coated paint of approved quality on both side (Inside & Outside) suitable to mount 3Phase Starter, Main Switch and Capacitor inside the Panel Board vertically over 18 SWG M.S.Sheet and the danger board fixed on the top of the Panel Doorreputed brand of ISI specification including all cost, conveyance, cess etc complete but excluding cost of GST
36Motor hood size (0.45mx0.45mx0.60m) made with 18 SWG (cold rolled M.S.Sheet with one coat of red axide primer and two coats of powder coated paint of approved quality on both side (inside & outside) suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for attachement with the groves on rear side of the pannel board of approved brand including all cost, conveyance, cess etc complete as per the direction of the Engineer-In-Charge
37Motor base plate made with M.S angle with one coat of red axide primer and two coats of powder coated paint suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for hole for fixing nut & bolt of approved brand including all cost, conveyance, cess etc complete as per the direction of the Engineer-In-Charge .
38Base frame for panel (size 0.40mx0.20m) made with 3 size M.S. channel having suitable holes for fitting of panel Board, coloured with one coat of red oxide primer and two coats of powder coated paint of approved quality & Base frame for motor (size 0.50mx0.27m) made with 3 size M.S. channel having suitable holes for fittings of different size and make 3 phase centrifugal monoblock pump set from 10 HP. to 15 H.P. coloured with one coat of red oxide primer & two coats of powder coated paint of approved quality reputed brand of ISI specification including all cost, conveyance, cess etc complete complete as direction of Engineer-in-charge
396 KVAR Power Shunt Capacitor with ISI mark of of reputed approved brand of including all cost, conveyance, cess etc complete complete as direction of Engineer-in-charge
40Electrical Earthing ( for 2nos 1 set ) as per the specification and direction of engineer -in-charge
41Installation for delivery and fitting including fitting of priming Tee, sluice Valve, NR Valve, air release valve and riser Tee ,MB Pump set,electrical instalation ,nut & bolt,rubber insertion, 4mm2 PVC wire,misc welding all complete etc
423x16 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098 (Pt-II) of approved brand of ISI marked including all cost, conveyance, cess etc complete complete as direction of Engineer-in-charge
43100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark complete as direction of Engineer-in-charge
44100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed brand including all cost, conveyance, cess etc complete as direction of Engineer-in-charge
45100mm dia C.I. Screw boss Foot Valve of swing type friction less with single disc conforming to IS-4038/1979 of reputed brand with ISI mark of reputed company having wide dealership network including all cost, conveyance, cess etc complete as direction of Engineer-in-charge
46100mm dia G.I.Flange (Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed brand including all cost, conveyance, cess etc complete as direction of Engineer-in-charge
47100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed brand including all cost, conveyance, cess etc complete as direction of Engineer-in-charge
48100mm dia C.I.Double Flanged Non Return Valve (NR) swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed brand including all cost, conveyance, cess etc complete as direction of Engineer-in-charge
49Cost of River Bank cutting & shaping for const. of P.F.
50Cost of 160 X 160 X160 mm HDPE Tee spigot design 6kg with ISI mark of reputed company including all cost, conveyance, cess etc complete as direction of Engineer-in-charge
51Cost of 160 mm HDPE End Cap with ISI mark of reputed company including all cost, conveyance, cess etc complete as direction of Engineer-in-charge
52Cost, supplying of 50mm dia Kirloskar make C.I double Air Release Valve PN 1.6 with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark including all cost, conveyance, cess etc complete as direction of Engineer-in-charge
53Cost of 100x100x25mm G.I. Tee with Plug for priming with ISI mark of reputed company including all cost, conveyance, cess etc completeas direction of Engineer-in-charge
54Cost of 160 mmx110 mm PVC/G.I./M.S. Reducer with ISI mark of reputed company including all cost, conveyance, cess etc completeas direction of Engineer-in-charge
55Cost of 200 mmx110 mm PVC/G.I./M.S. Reducer with ISI mark of reputed company including all cost, conveyance, cess etc completeas direction of Engineer-in-charge
56Cost of 200 mmx160 mm PVC/G.I./M.S. Reducer with ISI mark of reputed company including all cost, conveyance, cess etc completeas direction of Engineer-in-charge
57Cost of 200 mmx160 mm HDPE. Reducer with ISI mark of reputed company including all cost, conveyance, cess etc completeas direction of Engineer-in-charge
58Construction and erection of 11 /0.4 KV, 63 KVA Double Pole mounted Substation Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse ,all Channel matrials should be G.I , 5Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 400 kg 10 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPWODL specification etc. including cost of all materials, labour , transportation , padding and concreting of each pole ,stay anchor plate and survey,GIS data,pole painting,tapping complete with liasioning for testing inspection & commissioning as per specification of TPWODL etc complete.as per direction of Engineer in Charge
59Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 400 kg 10 M long PSC Pole with 55 Sqmm AAA Conductor average span 50mtr , 11 KV \\"V\\" Cross arm required No.of 11 KV T & C Disc. polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, , padding and concreting of each pole ,stay anchor plate and survey,GIS data,pole painting,tapping, guarding at Road crossings etc if required. including cost of all materials, labour transportation,inspection & commissioning etc. complete.as per direction of Engineer in Charge
60Fencing around the Sub-Station with Brick mesonary wall of size 5.00m x 3mtr x 1.50mtr height including Sand and metal Spreading with grill gate painting etc all coplete as per direction of engineer-in charge
6111 kv line double pole line DP along with 400 AMP AB Switch as per REC standard confirming to RE rule 1956 as per direction of Engineer in Charge Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58410391
AUTHORITY Government Departments
TENDER VALUE 68.57 Lakhs
LAST DATE 20-11-2026
Authority
Authority Name Orissa Lift Irrigation Corporation Limited
Work Description Tender for Installation And Energisation Of Pandarapali-I And Samaleichuan-Ii L.I. Project Under Dunguripali Block In Subarnapur District (Bkvy Ridf 2026-27 )
Basic Detail
Tender No OLIC-SNP-02/2026-27
Bidding Type Tender
Location
City Sonepur
State Odisha
Key Dates
Publish Date 06 Nov 2026
Submission Date 20 Nov 2026
Open Date 21 Nov 2026
Finance
Tender Value 68.57 Lakhs
Tender Fee 11800
EMD 68579
Exemption Available
Document List
052f876a-152d-42b0-aa71-0380a129694a.html
BOQ_618400.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

052f876a-152d-42b0-aa71-0380a129694a.html

xls

BOQ_618400.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender