Tender For Provn Of Certain Sanctioned Works At 515 Abw And Asc Centre And College Bangalore Under Ge (Central) Bangalore.
Tender Value
47 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
6 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain Sanctioned Works At 515 Abw And Asc Centre And College Bangalore Under Ge (Central) Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and installation of Pulley Operated ceiling mounted clothes drying systems Pull-it type 9 feet x 4 pipe, with following specifications-(a) Pulley operated clothes drying system consisting of rust proof anodized Aluminium pipes, each of outer dia 22 mm and inner dia 19.8 mm.(b) Pulleys /wheels - made up of Delrin mounted on channel pair of length 24 inches. (c) Rope guide and separator to avoid rope slippage.(d) Black or coloured auxiliary components.(e) Channel to be mounted or fixed with self-tapping screws and fastener.(e) Rope - Polyester braided undyed of 3-4 mm dia.(f) Lockinng system made of delrin fixed on walls - 4 Nos(g) Operation - Jerk free smooth operation |
| 2 | M&L for making good the disturbed surface of wall after installation of clothes drying system incl rendering with cement mortar 1:4, applying a coat of 1.5mm (average) thickness wall care putty, two coats of oil bound distemper matching with adjacent surfaces etc complete all as specified and directed. |
| 3 | Excavation in post holes each n. exc. 0.50Cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 5 | S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290 Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed. |
| 6 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 7 | S&F rolled sections as in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks andthe like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. complete all as specified and directed. |
| 8 | S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, necessary welding etc. conforming to Grade E-250 quality ‘A’ complete all as specified and as directed |
| 9 | M&L for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to grade E-250 quality 'A' complete all as specified and directed. |
| 10 | M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 11 | S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members (weight not exc 4kg per sqm) complete all as specified and directed. |
| 12 | M&L for Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 exceeding half brick but not exceeding one brick complete all as specified and as directed. |
| 13 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed |
| 14 | M&L for complete removal of existing finish from old steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed |
| 15 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 16 | Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth for foundation of drain, shed, man hole , laying of UG cables etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in soft/loose soil complete all as specified and directed. |
| 17 | Excavation over areas, n exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed. |
| 18 | Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed |
| 19 | Removing excavated surplus soil to a distance not exceeding 50 mts and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as directed. |
| 20 | Demolition of unreinforced cement concrete of any description and in any position complete all as specified and directed. |
| 21 | M&L for Sand filling under floors or in foundation. Cushioning for UG cable protection including watering and consolidations complete all as specified and directed. Note: Complacted thickness only will be measured and paid. |
| 22 | M&L for factory made 80mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-40 conforming to IS 15658-2006 of shape and size as directed by Engr-in-Charge laid over sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directedNote : Sand filling shall be measured and paid separately |
| 23 | M & L for Hard core of broken hard stone or boulders of guage not exceeding 63 mm, deposited spread as subbase to inter locking tiles in layers n.exc 15cm thick, watered & well rammed to true surface complete all as specified and directed.Note : Compacted thickness will be measured and paid. |
| 24 | M&L for PCC 1:5:10 type E-2 using 40 mm size graded crushed stone aggregate in foundations, filling and mass concrete complete all as specifid and directed |
| 25 | M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete complete all as specifid and directed |
| 26 | M&L for PCC 1:3:6 type C2 using 40mm size graded stone aggregate as in fdn filling and mass concrete complete all as specified and directed. |
| 27 | M&L for PCC 1:2:4 type B1 using 20 mm size graded crushed stone aggregate in foundations, filling for poles and mass concrete complete all as specifid and directed |
| 28 | M&L for 75 mm thick cement concrete 1:3:6, type C-2 using 40 mm size graded aggregate as in sub base flooring complete all as specified and as directed. |
| 29 | M&L for 75mm thick PCC (1:3:6) type C-1( using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n. exc. 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed. |
| 30 | M&L for 100 mm thick cement concrete 1:3:6, type C-2 using 40 mm graded aggregate as in sub base flooring complete all as specified and as directed. |
| 31 | M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in padding / levelling course / sub base of floor etc floor and finished the surface even & rough complete all as specified and directed. |
| 32 | M&L for 40 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in hardstanding, finished the concrete surace even and smooth without using extra cement including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed. |
| 33 | M & L for plain cement concrete 1 : 2 : 4 type B1, using 20mm graded granite stone aggregate as in coping including necessary form work, weathering slightly rounded, chamfered angles and throating complete all as specified and directed. |
| 34 | M&L for reinforced cement concrete Nominal mix type B-1 (1:2:4) using 20 mm graded crushed stone aggregate in slabs supported on walls, chajjas, beams, landings, deck slab and like any description and in any position including necessary formwork complete all as specified and directed. |
| 35 | S&F 10 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 36 | S&F TMT steel bars 6 to 8mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia all as specified and directed. |
| 37 | M&L for precast cement concrete M-25 Grade kerb block (factory casted) with plain fair faces, including weathering, slightly rounded or chamfered angle throating, with plain or interlocking joints and setting in cement mortar 1:3, providing and laying at or near ground level including making drainage opening wherever required complete all as specified and as directed.Note : Thickenss of joints except at sharp curve shall not be more than 5 mm |
| 38 | Demolition of brickwork, precast concrrete block walling or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etcand removal of entire debris as ordered outside MD land complete all as specified and directed. |
| 39 | M&L for precast cement concrete block type C1 (1:3:6) using 20 mm size gradedstone aggregates masonry with solid block,exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 40 | M&L for Precast cement concrete type C1 1:3:6 (using 20mm size graded stone aggregates) solid building blocks 10cm thick setting in CM 1:6 complete all as specified and as directed. |
| 41 | Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of debris outside MoD land and depositing where directed. |
| 42 | M&L for rendering 10 mm thick in CM 1:3 on concrete surface as in ceiling, chajja, roof projection etc. finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 43 | M&L for rendering 15 mm thick in CM 1:4 on walls made up of block masonary or concrete surfaces or surface other than fair faces of brick work or on one side of lathing, finished even and smooth without using extra cement complete all as specified and directed. |
| 44 | M&L for rendering 15 mm thick in CM 1:4 on walls made up of block masonary or concrete surfaces or surface other than fair faces of brick work or on one side of lathing, over roof slab mixed with WPC as per manufacturer's instruction finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 45 | Supply only integral water proofing compound of approved quality/make complete all as specified and directed. |
| 46 | M&L for rendering 15mm thick on stone / block masonary walls in CM (1:6) finished even & smooth without using extra cement on internal surfaces complete all as specified and as directed. |
| 47 | M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer including on newly plastered surfaces of wall including applying wall putty of 1.5 mm (Average) thickness on walls over plastered/unplastered surface and necessary prepartation complete all as specified and as directed. |
| 48 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 49 | M&L preparing newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer over a coat of 1.5 mm (Average) thick white cement based wall care putty complete all as specified and directed. |
| 50 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint (weather proof paint) of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new plastered surfaces of wall complete all as specified and as directed. |
| 51 | Complete removal of old decorative treatment and M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces etc complete all as directed. |
| 52 | M&L for complete removal of existing treatment and applying two or more coats distempering on old plastered surfaces with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification incl a coat of 1.5 mm (average) thick wall care putty complete all as specified and directed |
| 53 | Dismantling of AC Corrugated or semi corrugated sheet etc any thickness including ridges as in roof covering complete all as specified and directed. |
| 54 | S&F pre-painted galvalume (zincalume) aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof coverings/cladding to walls fixed with self tapping screws complete all as specified and directed. |
| 55 | S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ridges/cladding/towall,fixed with self tapping screws complete all as specified and as directed. |
| 56 | S&F Fibre glass reinforced translucent corrugated/ plain sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts and washer in roof, wall etc complete all as specified and directed |
| 57 | S&F 1.25mm thick 125 mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and directed |
| 58 | M&L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as specified and directed. |
| 59 | Dismantling of PVC/RCC water storage tank of capacity exceeding 500 Ltrs but not exceeding 1000 Ltrs incl removal of rubbish outside the MoD land complete all as specified and directed. |
| 60 | S & F Rotational moulded polyethene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including 25mm tank nipple/union, Gun-metal globe gate valves of 25mm dia with iron wheel head, screwed both ends for iron pipe and fixed and 25mm brass ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed |
| 61 | S&F 25mm outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as specified and as directed. |
| 62 | S&F 20mm outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as specified and as directed. |
| 63 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed. |
| 64 | M&L for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) (double charged) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 65 | M & L non-skid coloured joint free ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 10 mm thick screed bed in cement mortar 1:4 complete all directed and specified and directed. |
| 66 | M&L Glazed coloured ceramic tiles in vertical surface 350x 250x 7 / 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing coat in Cm 1:4 complete all as specified and as directed. |
| 67 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 68 | Taking down Chowkhats or frames exc. 1.5 sq. m and not exc 4.00 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 69 | S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frames, sliding guide channels for shutter for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 70 | S&F sheet glass 6mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 71 | S & F sheet glass 6mm thick plain ordinary quality and glazing with oil putty or wooden beads in square exc. 0.5 sqm in each pane complete all as specified and directed. |
| 72 | S&F Factory made pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness including filling of frame with PCC 1:2:4 type B-0 using 12.5mm stone aggregate complete as specified & as directed. |
| 73 | S&F 30 mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack all as specified and directed. |
| 74 | S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain Colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing shown in SSR 2004 Part II. complete all as specified and directed. |
| 75 | S&F 50mm x 47 mm size PVC solid door frame of size made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification and drawing shown in SSR 2004 Part II. complete all as specified and directed. |
| 76 | S&F Powder coated aluminium sliding window (three way) frame & shutter with glazed shutter and without miremesh shutter /skeleton section with & including the following :-(i) Aluminium frame section 116x36.50x1.80mm.(ii) Aluminium shutter glazed/skeleton section 50x20x1.50mm thick.(iii) Aluminium grill size 50mmx50mm and 4 to 5mm thick bars complete all as specified.(iv) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape.(v) 4mm thick glass orinary quality and fixed with rubber gasket for with glazed shutter etc.(vi) Stainless steel wire mesh 0.36mm nominal dia avg aperature 1.14mm and fixed with rubber gasket for without glazed shutter etc.(vii) Aluminium disc /bow hanle and locking system complete |
| 77 | S&F Powder coated aluminium Ventilator (partially fixed glazing and Partially louvered glazing) with the following details :-(i) Aluminium frame section 45x25x1.80mm.(ii) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape.(iii) 4mm thick frosted glass orinary quality (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket for with glazed shutter etc. (iv) Provision for providing exhaust fan shall be provided as directed. |
| 78 | S&F Butt hinges, 75 mm size medium weight, stainless steel complete all as specified and directed. |
| 79 | S&F Butt hinges, 100 mm size medium weight, stainless steel complete all as specified and directed. |
| 80 | S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 81 | S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 82 | S&F 200mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 83 | S&F 200 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 84 | S&F 150 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 85 | S&F 100 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 86 | S&F 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 87 | S&F mild steel powder coated body floor door stopper with hard drawn steel spring, 140 mm size fixed to door complete all as specified and directed. |
| 88 | M&L for Two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as specified and directed. Please Enable Macros to View BoQ information |
| 89 | M&L for Two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender