Tender For Internal Development Work For Newly Created/Reconfigured Plots Towards Iim Road In Vasant Kunj Sector-A
Tender Value
4.56 Crore
Estimated cost
Bid Submission
25 Nov 2026
4 days left
EMD
13.68 Lakhs
Bank guarantee accepted
Document Fee
8000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Internal Development Work For Newly Created/Reconfigured Plots Towards Iim Road In Vasant Kunj Sector-A
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge., All kinds of soil |
| 2 | Excavation for Pipe Line, ordinary soil (Loan clay or sand) including lift upto 1.5 m (5 fts.) and lead upto 50 m & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge upto a distance of 50 m from the foundation trenches. (0.00 to 1.50 m B.G.L.) |
| 3 | Providing Cast Iron Detachable (C.I.D.) Joints to PVC Pipe/ Asbestos Cement Pressure Pipes and Plain Ended C.I. Specials of the following nominal diameter with Collar, Rubber Ring, Flanges, Bolts and Nuts complete including testing of Joints. 150 mm dia |
| 4 | Providing and fixing spindle Fire Hydrant with 200 mm outlet complete with components (80) x 65 mm) |
| 5 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required wil be paid separately) (150 mm dia) |
| 6 | Construction of Sluice Valve (S.V.), Air Valve Chamber (1.00x1.20x1.20m) internal size including excavation of foundation and concrete base with 1:4:8 (cement, coarse sand & 40 mm stone ballast) 15mm thick, M-150 B/W (1:4) cement, coarse sand including plaster 12mm thick 1:4 cement & coarse sand with neat cement finish, RCC cover 15 cm. thick in 1:1.5:3 (cement, coarse sand & 20 mm stone grit) complete in all respect as per LDA specifications. |
| 7 | Earth work in cutting from borrow pits a lift uto 1.50mt transporting to site grading to required slop and compacting to and leveling required of table no 300.1 and 300.2 with a loading unloading 15km per technical specification |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for :, Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for :, Centering and shuttering including strutting and propping and removal of items for: Foundations, footings, base of columns, etc DSR 2023/5.9.1 |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 12 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & overlapping & hooks. |
| 13 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :, 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 14 | construction of granular sub base by providing close graded material , spreading in uniform layers with motor grader on prepared surface . mixing by mix in place method with front and loader at OMC ,and compacting with vibratory roller to achieve the desired density , complete as per clause 401 |
| 15 | providing, laying ,spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site ,laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density . |
| 16 | Pr5.07/510 MoRTH)oviding, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscosity grade bitumen to required line, grade and level to seve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 thnnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades. |
| 17 | Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 18 | Supply of following sizes pipes for distribution system conforming to latest/ relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest/relevant I.S. specifications including F.O.R. destination and all taxes and insurance etc. with loading, unloading and Carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of Engineer -in - charge. 110 mm dia HDPE Pipe PN-6: Class PE-100 |
| 19 | Providing, supplying, laying, jointing, testing and commissioning Double Wall Corrugated (DWC) HDPE Sewer Pipe conforming to IS 16098 (Part 2) and latest amendments, manufactured from virgin HDPE material with corrugated outer wall and smooth inner wall, having minimum ring stiffness of SN-8 (8 kN/m²), suitable for underground gravity sewerage applications. The pipe shall be provided with integral socket/spigot ends or HDPE couplers with EPDM rubber sealing rings to ensure watertight joints. The work shall include bed preparation, laying to required line and gradient, jointing, testing for leakage, backfilling with selected material, compaction, handling, loading, unloading, transportation and all accessories complete in accordance with CPHEEO Manual, manufacturer's specifications and directions of the Engineer-in-Charge. The rate shall include all labour, materials, tools, plant and equipment required for complete installation and commissioning in all respects. |
| 20 | Providing and laying DWC (SNS) pipes contorms the IS 16098 (Part 2) 3013 Structured-Wall plastics piping systems for NON- Pressure drainage and sewerage Specification including jointing with seal ring conforming 300 mm dia DWC (SN8) Pipes. |
| 21 | Supply and laying of the following of sizes of AC/HDPE pipe with all jointing materials confirming to latest relevant IS 1592 & IS 4984;1995 or its latest amendment with coupiers including complete in all respect F.O.R. destination including all complete of the work. Dia 160mm HDPE pipe |
| 22 | Providing and fixing C.I. Sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tall pieces if required will be paid separately) 150mm Dia |
| 23 | Construction of 0.60x0.60x1.50 m internal size connecting chamber as per standard design and specification of LDA & including 15 cm thick cement concrete 1:4:8 base & channel (with 40 mm stone ballast, coarse sand & cement), brick work 23 cm thick brick work thick in 1:4 cement & coarse sand mortar 12 mm thick cement plaster in 1:4 cement & coarse sand mortar & with neat cement finish including 16 mm dia M.S. bar foot rest embedded with 1:2:4 cement concrete at 23 cm centre to centre with including Circular Shape 560mm dia Precast R.C.C. Manhole Cover with Frame (EHD-35), floor with 1:2:4 cement concrete all complete as per of Engineer in charge of work (height will be measured from invert of pipe to bottom of the slab) (analysis rate). |
| 24 | Construction of 1.00x1.20x1.50 m internal size manhole as per standard dsign and specification of LDA & including 30 cm thick cement concrete 1:4:8 base & channel (with 40 mm stone ballast, coarse sand & cement), brick work one & half brick work thick in 1:4 cement & coarse sand mortar & with neat cement finish including 16 mm dia M.S. bar foot rest embedded with 1:2:4 cement concrete at 23 cm centre to centre and 15 cm thick RCC slab with 1:1.5:3 cement, coarse sand and 2 cm guage stone grit with including Circular Shape 560mm dia Precast R.C.C. Manhole Cover with Frame (EHD-35), floor with 1:2:4 cement concrete all complete as per Engineer in charge of work (height will be measured from invert of pipe to bottom of the slab (analysis rate). |
| 25 | Addition/ subtraction Masonry shaft 0.60x 0.60 mtr size as per slandard design & specification of LDA having one brick work in 1:4 cement & coarse sand mortar 12 mm thick cement plaster in 1:4 cement & coarse sand mortar with neat cement finished & including 16 mm dia MS bar foot rest embedded with 1:2:4 cement concrete as 23 cm. centre to centre all complete as per of Engineer in charge of work. (analysis rate) |
| 26 | Addition/ subtraction Masonry shaft 0.60x 0.60 mtr size as per slandard design & specification of LDA having one brick work in 1:4 cement & coarse sand mortar 12 mm thick cement plaster in 1:4 cement & coarse sand mortar with neat cement finished & including 16 mm dia MS bar foot rest embedded with 1:2:4 cement concrete as 23 cm. centre to centre all complete as per of Engineer in charge of work. (analysis rate) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender