Housing Urban and Rular Development Government Departments Closing in 6 days TDR #58409286

Tender For Special Repairs To Toilets In Government High School At Ponnegoundenpudur In Coimbatore District.

Issued by Government Departments · Coimbatore, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Nov 2026
6 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Special Repairs To Toilets In Government High School At Ponnegoundenpudur In Coimbatore District.

BOQ

Name of Work:- SPECIAL REPAIRS TO TOILETS IN GOVERNMENT HIGH SCHOOL AT PONNEGOUNDENPUDUR IN COIMBATORE DISTRICT.
Sl. No. Item Description
1Dismantling clearing away the damaged Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs and carefully stacking materials useful for reuse etc, as directed by the departmental officers as per standard specification
2Clean removal of Cement plaster from walls and racking out joints 20mm deep and carefully stacking materials useful for reuse etc, as directed by the departmental officers as per standard specification
3Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.
4EARTH WORK OPEN EXCAVATION by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.
5PLAIN CEMENT CONCRETE 1:5:10 (One cement, five M - sand and ten aggregate) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers.
6Supplying and filling of 40mm Broken Brick jelly for SOAKPIT including loading conveing and unloding and as directed by the departmental officers etc., complete complying with standard specification.
7Construction BRICKWORK in cement mortar 1:5 (One cement and five M - sand) using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge.
8FOR FOUNDATION AND BASEMENT.
9Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)
10FOR FOUNDATION AND BASEMENT.
11PLAIN CEMENT CONCRETE 1:5:10 (One cement, five M - sand and ten aggregate) using Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers
12PLAIN CEMENT CONCRETE 1:2:4 (One cement, two M - sand and four aggregate) using 20 mm gauge hand broken hard granite stone jelly for WEARING COAT including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification.
13Supplying. Fabricating and fixing of M S GRILL for open court yard grill, grill work to doors, windows and ventilators with required size and angles including with necessary M.S. Channels, ' L ' angles, M.S. Plate as per the approved special designed including cost of materials and labour charges for cutting angle, welding charges including cost of welding rod conveyance charges at site of work including cost of one coat of red oxide primer etc., complete and as directed by the departmental officers.
14Manufacturing supplying and fixing of Fully Panelled steel door (SINGLE LEAF) with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. - Single leaf
15Flooring with ceramic tiles of size 305 X 305 X 6mm and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
16Dadooing walls with following best approved quality, colour glazed tiles conforming to IS 15622 of size 300 X 450 X 8mm in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
17Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.
18Painting Old Plastered Wall Surface with Two finishing coats of ready mixed INTERIOR (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
19Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on old cement plastered wall surface ect., complete complying with standard specification and as directed by the departmental officers.
20PAINTING TWO COATS FOR NEW IRON WORKS for doors, windows and ventilators, iron bars, weldmesh, wiremesh, screen, steel bars, flats and other similar works etc., with two coats of approved first quality of synthetic enamel paint over the existing red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. (The paint to be used should be got approved by the Executive Engineer before use on work)
21Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply BELOW GROUND LEVEL. -
2225mm diametre UPVC Pipe
23Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply Above ground level.
2425mm diametre UPVC Pipe
25Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - Internal water supply Above ground level.
2620mm diametre UPVC Pipe
27Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements complete complying as directed by the department officers as per standard specification.Note:- Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separte provision for fixing UPVC specials needs to be allowed.
2825mm diametre U.P.V.C UNION.
2920mm diametre U.P.V.C UNION.
3025mm diametre U.P.V.C ELBOW.
3120mm diametre U.P.V.C ELBOW.
3225mm diametre U.P.V.C TEE.
3320mm diametre U.P.V.C TEE.
3425 X 20mm diametre UPVC REDUCER.
3520 X 15mm diametre UPVC REDUCER.
3625 mm diametre UPVC HEX NIPPLE.
37Renewing and fixing in position 15mm dia brass CP screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
38Supplying and fixing the of 25mm dia new GUN METAL GATE VALVE (HEAVY TYPE) of approved quality and good variety excluding the fixing charges but including necessary cutting and threading of G.I. pipes for jointing the G.I. specials and providing two coats of painting with good quality and approved variety of anti-corrosive paint over a coat of red oxide primer coat in the case of pipe line above ground level and one coat of tarring in the case of pipe line below ground level etc., complete.
39Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
40Supplying and fixing position CI Nahani Trap / Floor Trap of 100 X 75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
41Supplying and fixing in position best quality P.V.C. SOIL / WASTE PIPES of following sizes having I.S.I mark and providing leak proof joints including fixing to walls with Specials / PVC /MS. clamps etc., and making connection to all sanitary fittings,dismantling the masonry / RCC works wherever necessary and making good the dismantled portion to original condition etc., complete complying with standard specification.[The PVC pipe should be got approved by the Executive Engineer before use on works.]
4275 mm diametre PVC SOIL PIPE [ 6Kg / Cm2]
43110 mm diametre PVC SOIL PIPE [ 6Kg / Cm2]
44Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
45110 mm diametre PVC ELBOW WITH DOOR.
46110 mm diametre PVC PLAIN ELBOW.
4775 mm diametre PVC ELBOW WITH DOOR.
4875 mm diametre PVC BEND.
4975 mm diametre PVC PLAIN ELBOW.
50Supplying and filling of 40mm gauge metal in DISPERSION TRENCH etc., complete complying with standard specification and as directed by the departmental officers.
51Supplying and filling of 20mm gauge metal in DISPERSION TRENCH etc., complete complying with standard specification and as directed by the departmental officers.
52Construction of inspection chamber of clear size 0.45 X 0.45m including earth work excavation, CC 1:5:10 of 10cm thick and Fly Ash brick work in cement mortar 1:5 [one cement and five M - sand] using best quality of Fly Ash bricks of size 23 X 11X 7cm with plastering with cement mortar 1:3 [one cement and three P - sand] 12mm thick to inner and outer sides and wearing coat 1:3:6 [one cement, three M - sand and six aggregate] 15cm thick and covered with precast slab 5cm thick etc., complete complying as directed by the departmental officers as per standard specification.
53Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 50mm thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using 20mm HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers.
54Manufacturing, supplying fixing of RCC PRECAST RING of 1.20m diametre of slab 0.30m height in cement concrete 1:2:4(One cement, two M - sand and four aggregate) using 20mm gauge hard broken granite stone metal including cost of moulding and including cost of reinforcement of 10 to 6mm dia rod at 15cm centre to centre in both direction and plastering the top side with cement mortar 1:3(One cement and three P - sand) 6mm thick including finishing and curing etc., including cost of materials, conveyance at site of works, loading and unloading and fixing in position with all necessary accessories etc., complete complying with standard specification as directed by the departmental officers. [ The materials should be got approved by the departmental officers before execution].
55Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers
56Supplying and fixing of PVC ready made WATER TANK of 500 Litres capacity of best and approved quality with ISI specification and having inlet,outlet, overflow and clearing pipe arrangements and labour charges for fixing in position with all necessary accessories and transporting at site of work etc., complete complying as directed by the departmental officers.
57Supplying and errecting of 1 H.P.ISI make single phase slow speed MONO BLOCK MOTOR single phase electro motor having I.S.I. mark with suitable base plate with necessary accessories with conforming to I.S.I. Specification with A.C. 200 / 220 Volts 50 Cycles, 2880 RPM Single phase JET Pumpset with Suction delivery of size 1\\" X 1\\" having ISI mark single phase Starter with Switch and wooden switchboard,pilot lamp, 1\\" dia G.M.Gate Valve, 3 / 20 Copper wire to a length of 10m including supplying of G.I. Pipe .' B ' class for suction delivery, Foot Valve etc., complete and as directed by the departmental officers as per standard specification.
58Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/U bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers.
59Supplying and paving the NEW Rubber Moulded Hydraulic Pressed INTER LOCKING PAVER BLOCK having a minimum thickness of 83 mm [M 15 Grade] Over a base layer of sand filling, filling the joints and compacting the same to proper gradient etc., excluding cost of materilas and including labour charges for fixing in gradient with all necessary accessories including conveyance at site of work, loading and unloading etc., complete complying as directed by the departmental officers.
60GST 18% (CGST AT 9% + SGST AT 9%) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58409286
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 23-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Special Repairs To Toilets In Government High School At Ponnegoundenpudur In Coimbatore District.
Basic Detail
Tender No 02/11N/CBE-DVN /2026-27
Bidding Type Tender
Location
City Coimbatore
State Tamil Nadu
Key Dates
Publish Date 06 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 4000
Exemption Not Available
Document List
BOQ_867186.xls
fbebbe6d-c7b1-448e-b984-2175dd9d5a0b.html
TenderDocument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_867186.xls

html

fbebbe6d-c7b1-448e-b984-2175dd9d5a0b.html

pdf

TenderDocument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender