Housing Urban and Rular Development Government Departments Closing in 6 days TDR #58409249

Tender For Special Repairs To Boys And Girls Toilet In Government Higher Secondary School At Samathur In Anaimalai Taluk Of Coimbatore District.

Issued by Government Departments · Coimbatore, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Nov 2026
6 days left
EMD
3000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Special Repairs To Boys And Girls Toilet In Government Higher Secondary School At Samathur In Anaimalai Taluk Of Coimbatore District.

BOQ

Name of Work:- SPECIAL REPAIRS TO BOYS AND GIRLS TOILET IN GOVERNMENT HIGHER SECONDARY SCHOOL AT SAMATHUR IN ANAIMALAI TALUK OF COIMBATORE DISTRICT.
Sl. No. Item Description
1Dismantling clearing away the damaged Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs and carefully stacking materials useful for reuse etc, as directed by the departmental officers as per standard specification
2Clean removal of damaged CEMENT PLASTER from walls as directed by the departmental officers as per standard specification
3Flooring with ceramic tiles of size 305 X 305 X 6mm and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
4Dadooing walls with following best approved quality, colour glazed tiles conforming to IS 15622 of size 300 X 450 X 8mm in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
5Painting two coats of old plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
6Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on old cement plastered wall surface ect., complete complying with standard specification and as directed by the departmental officers.
7Supplying and fixing in position of Solid PVC DOOR SHUTTERS using 19 gauge 19mm MS Sq. tubes for styles and outer frames. 15 mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The overall size of styles shall be 50 x 30 mm. The overall size of top rail, lock rail and bottom rail shall be 75 x 30 mmThe overall size of frames sshall be 50 x 45 mm, with suitable rabate for housing the shutter. etc., complete as directed by the departmental officers. SOLID PANEL PVC DOOR WITH FRAME.
8Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint over the existing in iron all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
9Manufacturing, supplying and fixing in positon of RCC Jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed by the departmental officers.
10Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply BELOW GROUND LEVEL. -
1125mm diametre UPVC Pipe
12Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - Internal water supply Above ground level.
1320mm diametre UPVC Pipe
14Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements complete complying as directed by the department officers as per standard specification.Note:- Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separte provision for fixing UPVC specials needs to be allowed.
1525mm diametre U.P.V.C ELBOW.
1620mm diametre U.P.V.C ELBOW.
1715mm diametre U.P.V.C ELBOW.
1825mm diametre U.P.V.C TEE.
1925mm diametre U.P.V.C COUPLING.
2020mm diametre U.P.V.C COUPLING
2120 X 15mm diametre UPVC REDUCER TEE.
22Supplying and fixing in position best quality P.V.C. SOIL / WASTE PIPES of following sizes having I.S.I mark and providing leak proof joints including fixing to walls with Specials / PVC /MS. clamps etc., and making connection to all sanitary fittings,dismantling the masonry / RCC works wherever necessary and making good the dismantled portion to original condition etc., complete complying with standard specification.[The PVC pipe should be got approved by the Executive Engineer before use on works.]
23110 mm diametre PVC SOIL PIPE [ 6Kg / Cm2]
24Renewing and fixing in position 15mm dia brass CP screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
25Construction of inspection chamber of follwing sizes including earth work excavation, CC 1:5:10 of 10cm thick and Fly Ash brick work in cement mortar 1:5 [one cement and five M - sand] using best quality of Fly Ash bricks of size 23 X 11X 7cm with plastering with cement mortar 1:3 [one cement and three P - sand] 12mm thick to inner and outer sides and wearing coat 1:3:6 [one cement, three M - sand and six aggregate] 15cm thick and covered with precast slab 5cm thick etc., complete complying as directed by the departmental officers as per standard specification.
260.45 X 0.45m Clear size
270.60 X 0.60m Clear size
28GST 18% (CGST AT 9% + SGST AT 9%) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58409249
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 23-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Special Repairs To Boys And Girls Toilet In Government Higher Secondary School At Samathur In Anaimalai Taluk Of Coimbatore District.
Basic Detail
Tender No 04/11N/CBE-DVN /2026-27
Bidding Type Tender
Location
City Coimbatore
State Tamil Nadu
Key Dates
Publish Date 06 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 3000
Exemption Not Available
Document List
5a559f63-6ca3-4c54-8023-542d8fee65aa.html
BOQ_867203.xls
TenderDocument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

5a559f63-6ca3-4c54-8023-542d8fee65aa.html

xls

BOQ_867203.xls

pdf

TenderDocument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender