Tender For Construction Of Internal Road In At Sunderbani Mil Stn Under Ge (N) Akhnoor
Tender Value
31.63 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
63500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Internal Road In At Sunderbani Mil Stn Under Ge (N) Akhnoor
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30 cm and averaging 15 cm deep and getting out in any type of soil, complete all as specified and directed. |
| 2 | Removing surplus excavated material to a distance beyond 250 m and upto a total distance of 500 mr deposting where directed at al it a level n.exc. 1. 5 mtr above the starting point complete all as specified. |
| 3 | Rolling and consolidation of formation surface in cutting/filling with power roller &8 to 12 tonne capacity. |
| 4 | M&L for 150 mm thick (spread thickness) soling (or süb base) with broken boulders or quarried stones, interstics filled, surfaces formed and rolled & consolidated to required gradient & chamber complete all as specified and directed. |
| 5 | M& L for 150 mm thick (compacted thickness) WBM with coarse aggregates of Granite trap or basalt grading 2 (63 mm to 40 mm size) or of grading 3 (50 to 20 mm size), spread, rolled and consolidated to gradient and chamber required complete all as specified and directed. |
| 6 | M& L for Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc applying evenly a priming/tack coat with paving bituminous primer @10 kg per 10 Sqm of road surface, laying Bituminous premix asphaltic dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix (using hot mix plant & mechanical paver) rolled and compacted to required camber and gradient complete with paving bitumen complete all as specified. |
| 7 | M& L for Continuous brick edging with width equal to width of brick, with well burnt, sub class 'B' brick laid dry on end vertically, including necessary excavation ande arth work in any type of soil and removing surplus soil to a distance not exceeding 50m complete all as specified and directed. |
| 8 | M&L for 2.5mm thick hard thermoplastic road marking Painting lines, dashes,arrows, letters, etc. on roads pavements and the like n exc 10cm wide with road marking paint, white or golden yellow conforming to british specification IS-3762 with 20% glass bids having reflective index of 1.5mm, 75% spherical indigenous or for foundation plan having sufficient strenght to with stand heavy load without deformation and having softening point 25 to 30 of area in width of 10cm strip in wide or golden yellow colour according to IRC 35-1970. complete all as specified and directed. |
| 9 | M& L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 10 | S&F solar cat eye solor reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No DA 972.0 fixed with and incl MS stud of suitable size as per manufacturer instructions. complete all as specified and directed. |
| 11 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 12 | M & L. Cement concrete in foundations, filling and mass concrete 1:4:8 Type D using 40 mm graded aggregate, complete all as specified and directed. |
| 13 | M & L Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base including supply of good earth from out side MD land complete all as specified and directed. |
| 14 | M & L Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m and n.exc 3m high from base including supply of good earth from out side MD land complete all as specified and directed. |
| 15 | M&L for Reinforced concrete pipes, class NP3, 900 mm Dia, laid and jointed complete with collars complete all as specified and directed. |
| 16 | Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed. |
| 17 | M&L PCC 1:4:8 type D2 (using 40mm graded stone agg) as in foundation filling and mass concrete all as specified and directed. |
| 18 | M & L for Stone Walling of random rubble, coursed, well bounded, bedded and solidly hearted, built in CM 1:4, all as specified and directed. |
| 19 | M&L for PCC 1:2:4, type B-1 using 20mm graded stone aggregates as in coping all as specified and directed. |
| 20 | M&L for Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm on lime/sand stone all as spd and directed. |
| 21 | M&L for Raised pointing to RR masonry in CM 1:4 all as spd and directed. |
| 22 | M&L for providing Precast cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone agg) as in PCC bolders set in cement mortar 1:6 all as specified and directed. |
| 23 | M&L for Boulder filling dry hand packed tightly as in back of wall all as specified and directed. |
| 24 | Returning filling including spreading levelling watering and well ramming in layers n.exc 25cm in soil all as specified and directed. |
| 25 | Removing excavated material to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 m above the starting point all as specified and directed. |
| 26 | S&F for PVC (SWR) pipe 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors as in weep holes all as specified |
| 27 | Supply only Paving Bitumen grade VG-30. ( For Price adjustment in Job Mix Formula) Rate is Rs 68.00 per Kg. |
| 28 | Note:- Deduction for Schedule of credit (Sch 'A' Part-II) to be made of ₹ 0.00 from the total quoted amount of BOQ while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender