Tender For Fabrication Of Polyhouse-20 Nos. At Parsari & Merag Villages Of Joshimath, Chamoli, Uttarakhand. (Under Tsp)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Nov 2026
17 days left
EMD
40000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Almora → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fabrication Of Polyhouse-20 Nos. At Parsari & Merag Villages Of Joshimath, Chamoli, Uttarakhand. (Under Tsp)
BOQ
| Sl. No. | Item Description |
| 1 | Specifications of Polyhouse |
| 2 | 1 Construction Site of Polyhouse F.O.R.–20 Nos. will be constructed in Parsari & Merag villages of Joshimath, Chamoli, Uttarakhand.2 Size Preferably Length = 18.2 to 19.0 m and Width = 5.25 to 5.5 m3 Area Approx. 100 m²4 Ridge Height 4.2 to 4.4 m5 Side Height 2.5 to 2.6 m6 Shape Hut Type7 Span 5.25 to 5.5 m (Single Span)8 Column Spacing 2.6 to 2.7 m9 Galvanization Quality Complete structure made of hot dip galvanized steel tubular pipes with a minimum of 360 GSM (with Zinc coated on continuous procedure to meet the quality requirements or equivalent section confirming). BIS standards having wall thickness 2mm(i) Vertical Columns 60 mm OD × 2.0 mm thickness Hot Dip 360 GSM GI.(ii) Trusses/Arches 48 mm OD × 2.0 mm thickness Hot Dip 360 GSM GI.(iii) Front & Back Frames, Purlins and Brackets 40 mm OD × 2.0 mm thickness(iv) Fittings All members connected through nuts, bolts and clamps. Welding shall not be permitted.10 Foundation Foundation pipe of 48 mm OD, 1500 mm length and 3 mm thickness (minimum weight 4.20 kg/m). Grouting shall be done with cement concrete mixture (1:2:4) using telescopic insertion of the column. A portion of the pipe shall remain visible above ground level. Pit size shall be 45 cm × 45 cm × 100 cm depth. Two holdfasts shall be provided in perpendicular directions at 20 cm spacing, starting 20 cm above the base.11 Covering Material UV-stabilized 200 micron multilayer polyfilm conforming to IS 15827:2009 with minimum 85% light transmittance. Fixing of cladding material shall be carried out between 11:00 AM and 3:00 PM.12 Fixing of Polyfilm Two-way aluminum (220 g/rm) / GI 0.6 mm profiles with locking; no wooden/PVC grippers. Profiles shall be secured using self-drilling galvanized steel screws.13 Side Ventilation Both sides shall be provided with side ventilation up to 1.6 m height using 40-mesh nylon insect-proof net (preferably Nylon/Netlon). Ventilation system shall be provided with manual roll-up arrangement, universal joints and holding belts.14 Bottom Apron UV-stabilized skirting film of 140 GSM on both sides. The apron shall be laminated on both sides, extend 0.3–0.4 m above ground level and be buried 60 cm below ground level. Minimum warranty: 3 years.15 Door Single entrance door with two hinges, size 2.1 m × 1.0 m, single leaf type made of FRP sheets mounted in a suitable frame with complete locking arrangement.16 Fasteners GI clamps, bolts, nuts and self-tapping screws of high tensile strength with minimum 120 GSM galvanization coating.17 Insect Net 40-mesh UV-stabilized insect-proof net.18 Rainwater Harvesting Provision shall be made for rainwater harvesting through PVC pipes of minimum 4-inch diameter, including lateral and ground support pipes with bends connecting roof gutters to ground level. Drainage gutters and end caps shall be provided.19 Certification Structural and plastic materials shall be tested before installation and at handing over/taking over by NTH, CIPET or any recognized Government testing agency. Relevant test certificates shall be submitted by the manufacturer prior to the installation.20 Site Preparation The firm shall be responsible for all land leveling, site preparation and head loading of materials from the nearest motorable road.21 Standards Only BIS-compliant products shall be accepted.22 Display Plate A stainless steel display plate of size 2 ft × 1 ft shall be fixed on the gate displaying \\"ICAR-VPKAS, Almora\\", Farmer's Name, Village Name, Year of Construction and other relevant details in Hindi.23 Work Order The Institute reserves the right to increase or decrease the number of polyhouses and may issue work orders in full or in parts/splits.24 Warranty Five (5) years warranty from the date of installation for the complete structure excluding polyfilm and insect net. Three (3) years warranty against defects in materials and workmanship for all supplied materials and installation works.25 Roof Identification Marking “ICAR-VPKAS” shall be displayed on the roof using green-coloured radium tape. Each letter shall have dimensions of 5 cm width × 60 cm length. Grain Counter (electronic) Option IIArticles to be counted: 0.1 to 18 mm in diameter.Counting Performance Typical values: Approximately 0.5 mm diameter approximately 100,000 units per hour2.0 mm diameter approximately 35,000 units per hourAccuracyLess than1/1000 error rate Counting RangeThe entire size range of the objects should be processed using the same, universally adjustable conveyor bowl. Detection of ObjectsObjects are detected by a very precise and, for the most part dust-insensitive infrared light barrier. It can be cleaned by wiping two surfaces, without dismounting any parts.Removal of Residual SubstancesSmall, unwanted objects in the counting material should be excluded from counting procedure and adjustable sensitivity of the parts sensor should be thereConstruction:The Dimensions should not be more than: W x D x H: 250 x 350 x 200mm approximatley and Weight should be about 10-15kgPower Supply: 230 volts ± 10%Software for counting storage and weighing should be provided.- All parameters, results or settings can be logged and stored on the control PC.- Product names can also be entered with a barcode reader- The width of the outlet of the conveyor bowl should be manually adjustable for different seed sizesAt least two years warrantyInstallation and testingUser list mustCIP ICAR-VPKAS Hawalbagh Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender