Tender For Providing Accommodation For Guards Of Gas Godown Deployed At Daizer Location Under Ftr Hq Bsf Rajasthan(Sh: electrical installation And Fans)
Tender Value
2.73 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
2 days left
EMD
5465
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Accommodation For Guards Of Gas Godown Deployed At Daizer Location Under Ftr Hq Bsf Rajasthan(Sh: electrical installation And Fans)
BOQ
| Sl. No. | Item Description |
| 1 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 2 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing thepipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. i) 15 mm nominal dia Pipes |
| 4 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. i) Group B |
| 5 | Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 6 | Wiring for light/ power plug with 4X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 Nos. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 7 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 8 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.i) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 9 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.i) 5/6 A switch |
| 10 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.ii) 3 pin 5/6 A socket outlet |
| 11 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.i) 3 Module (100mmX75mm) |
| 12 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.ii) 6 Module (200mmX75mm) |
| 13 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.iii) 12 Module (200mmX150mm) |
| 14 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,connections etc. as required. |
| 15 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). i) 12 way , Double door |
| 16 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.i) Single pole |
| 17 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.ii) Double pole (32 Amp) |
| 18 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminiumalloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessoriesincluding safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.make Havells/Orient/Bajaj or its equvilqnt. i) 1200mm, service value ≥ 6.0 CM/Min/Watt, airdelivery 210 CM/Min (Minimum) |
| 19 | Supplying and fixing of fabricated Duct cooler of size 34\\" × 34\\" × 70\\" having body made of 20 to 22 SWG GI Sheet and Tank made of 18 SWG GI sheet duly painted with powder coated paint including fixing of cooler submersible pump of 36/40 watt make Little Giant/Khaitan/CG (ISI mark) or equivalent, Gate made with Evaporative Cooler Louver Assembly Panel and Honeycomb cooling pad binding with MS/PVC net/clip/strips fitted at three side covering maximum side area, Brass floated valve of weighing approx. 250 gm, 8\\" long rod, PVC ball of 4\\" dia and MS bracketing for holding existing exhaust fan 600 mm (24\\") sweep complete set etc. as required as per the direction of Engineer-in-Charge. (i) Capacity of motor 0.5-0.75 HP (ii) Coverage area upto 900-1000 sq feet (iv) tankank size 135-140 ltr |
| 20 | Supplying and fixing of single phase, 600 mm(24'') sweep Heavy duty metal body double ball bearing exhaust fan capable of delivering 900 to 1400 RPM in the existing hole including P/Fixing connection etc as required as per direction of engineer in charge. Make- Havells / Usha / Bajaj / Crompton/Orient or equivalent including testing and commisioning etc. as required.(CFM upto 12000) |
| 21 | Supplying and making ducting with 24 gauge GI sheet having faces of required site (as per site requirement) including heat resistant paint at the exposed portion of the duct etc as required as per direction of engineer in charge.(L=20,b=2,h=2),[2(b+h)*L) |
| 22 | Supplying & fixing duct cooler Canvas of size 600 × 600 mm in existing cooler including connecting the Canvas with duct etc. as required as per direction of Engineer-in-Charge. |
| 23 | supplying and Laying of one number PVC insulated and PVCsheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.(2C X 25 sq mm AI armoured cable) |
| 24 | Supplying and fixing of 240v, 50 Hz, 50 watt, 5700-6500 K LED flood light fitting with IP 66 protection, Energy saving, environmentally friendly, long life, exclusive innovative die-cast aluminium with high power LEDs as light source, suitable for highlighting architectural features or Area Lighting, having luminous efficacy-110 lv/Watt, having warranty of 5 Years to be fixed on the existing frame including connection etc as required as be direction of engg-in-charge. Make-Havells/CG/Bajaj/Surya/Orient or its equvilant |
| 25 | Supplying and fixing of 20 Watt surface mounted LED Batten uitra slim economical and square shaped suitable for 240 volt , 50 Hz supply including connection etc as required as be direction of engg-in-charge. Make-Havells/CG/Bajaj/Surya/Orient |
| 26 | Supplying and laying M S pipe of Medium B class of Dia 50 mm (2 inch), pipe thicknes 3.65 mm with as per IS 1239(Part-I) 2004 for the crossing of road of UG cable etc.,make Jindal/Tata/surya roshni or its equvilant. |
| 27 | Providing and Fixing of 7 Watt , 4000K , LED spot light surface mounted fixture with compact design in the existing ceiling including connection etc as required connection etc as required.(Make-Philips/havells/bajaj/Oritnt, LED Black/White or equivalent make) |
| 28 | Supplying and fixing of 9 W retrofit LED Lamp B22 base,Decorative wall light fixture made up of Polycarbonate, suitable for 240 Volt ,50 HZ in the existing wall including P/Fixing connection etc as required as per direction of engineer in charge. Make- Havells / Usha / Bajaj / Crompton /Orient or equivalent to. |
| 29 | Maintenance free gel earthing with pipe in pipe /strip in pipe technology filled with anti-corrosive conductive compound (CPRI tested) Below the ground in 150-200mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C finished chamber covered with hinge type with locking arrangement C.I cover C.I frame of size 200mm x 200mm complete testing of earth resistance as required of following sizes with pipe in pipe technology (inner pipe Dia/outer Pipe Dia) 80-100 micron G.I coating. G.I Pipe 2000mm long.50/25mm ,Terminal 12mm G.I strip. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender