Tender For Renovation Of Water Supply System By Installation Of A New Open-Well Submersible Pump, Repair Of Two Existing Pumps, And Associated Delivery Piping Works At Shanagar Burning Ghat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Nov 2026
1 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Water Supply System By Installation Of A New Open-Well Submersible Pump, Repair Of Two Existing Pumps, And Associated Delivery Piping Works At Shanagar Burning Ghat
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection L&T FP 63 A |
| 2 | Supply & delivery of the following 50 Hz, AC, Direct on Line Starter of continuous duty in sheet steel enclosure (make L&T/ABB/SCHNEIDER):7.5 HP Three Phase (Max. Relay range20-32 Amp) |
| 3 | Supply and delivery of Single Phase preventer Relay suitable for 415V, 6 wire, upto 20HP motor (Make: L & T/ABB/Schneider/ Simence/ Minilic/ GE). |
| 4 | [RATE AS PER SCHEDULE OF RATES (2024-25), ELECTRICAL & MECHANICAL, DELHI JAL BOARD, ITEM NO. 2.65.14, PAGE- 40] SUPPLY OF LUBI BRAND (LHS/LHL TYPE) HORIZONTAL SUBMERSIBLE MONOSET PUMPS SUITABLE FOR 350- 415V THREE PHASE 50HZ FOR OPEN WELL (SUBMERGE COOLING), SUCTION X DELIVERY-65X50; TYPE- LHL-5BG |
| 5 | [RATE AS PER UNIFIED SCHEDULE OF RATES (M&E) (PART-A)IRRIGATION & WATERWAYS DEPARTMENT, GOVT. OF WB, ITEM NO. 5.2.4, PAGE -96 ] COST OF REPLACEMENT OF DAMAGED LINE SHAFT / CLEANING OF JAMMED IMPELLER OF V.T./ INCLINED PUMPS AS PER MANUFACTURERS INSTRUCTION MANUAL WITH ALL TOOLS, TACKLES, CONSUMABLES SUCH AS GLAND PACKING ETC. THIS JOB INCLUDES DISMATLING OF PUMP ASSEMBLY PARTS BY PARTS AND REPLACEMENT OF DAMAGED PARTS, REFITTING OF ALL PARTS & SUB ASSEMBLIES WITH PROPER ALIGNMENT INCLUDING MOTOR REMOVING & REFIXING, TEST & TRIAL FOR 24 HRS ETC COMPLETE AS PER DIRECTION (SPARE COST EXCLUDED). I) CAPACITY UPTO 05 CUSEC PUMP |
| 6 | [RATE AS PER SCHEDULE OF RATES (2024-25), ELECTRICAL & MECHANICAL, DELHI JAL BOARD, ITEM NO. 2.1.10, PAGE- 536] SUBMERSIBLE PUMPS_RATES FOR SPARES OF MODY MAKEPUMPS_REWINDING KIT_M/G-504 T 5 HP |
| 7 | [RATE AS PER SCHEDULE OF RATES (2024-25), ELECTRICAL &MECHANICAL, DELHI JAL BOARD, ITEM NO. 2.1.1, PAGE- 538] RATES FOR JOB WORK OF MODY MAKE DEWATERING PUMPS_LABOUR CHARGES FOR REWINDING (1 JOB)_M/G504T 5HP |
| 8 | [RATE AS PER SCHEDULE OF RATES (2024-25), ELECTRICAL &MECHANICAL, DELHI JAL BOARD, ITEM NO. 2.1.1, PAGE- 538] RATES FOR JOB WORK OF MODY MAKE DEWATERING PUMPS_LABOUR CHARGES FOR REPAIRING & BALANCING OF ROTOR (1JOB)_M/G504T 5HP |
| 9 | [RATE AS PER UNIFIED SCHEDULE OF RATES (M&E) (PART-A) IRRIGATION & WATERWAYS DEPARTMENT, GOVT. OF WB, ITEM NO. 5.2.2, PAGE -96] MAINTENANCE AND OVERHAULING OF CENTRIFUGAL PUMP AS PER MANUFACTURERS INSTRUCTION MANUAL WITH ALL TOOLS, TACKLES ETC. THIS JOB INCLUDES LABOUR CHARGES, CONSUMABLES LIKE O - RING, GLAND PACKING, SUNDRY CLEANING MATERIAL ETC. THIS JOB INCLUDES DISMANTLING OF ALL SUB ASSEMBLIES SUCH AS COOLING PIPES, BEARING HOUSING, STUFFING BOX, SHAFTS, BOWL ASSEMBLY, BELL MOUTH, STRAINER ETC. RECONDITIONING OF ALL PARTS, INSPECTION OF ALL PARTS & REPLACE THESE PARTS AS PER INSTRUCTIONS (SPARES COST EXCLUDED) STRAIGHTHENING OF SHAFTS & REFITTING OF ALL PARTS & SUB ASSEMBLIES WITH PROPER ALIGNMENT. INCLUDING MOTOR REMOVING & REFIXING, TEST & TRIAL FOR24 HRS. ETC COMPLETE. I)CAPACITY UPTO 2 CUSEC PUMP |
| 10 | [RATE AS PER UNIFIED SCHEDULE OF RATES (M&E) (PART-A)IRRIGATION & WATERWAYS DEPARTMENT, GOVT. OF WB, ITEM NO. 5.3J.2, PAGE -123] PRELIMINARY CHECKING OF THE WHOLE MOTOR (LT SQ. CAGE IM) AND TESTING OF I.R. VALUE, LOAD CURRENTS, LEAKAGE FACTOR OF STATOR & ROTOR, TERMINAL LEAD JOINTS OF STATOR CONNECTION ENDS, INSULATION OF GLASS FIBRE TERMINAL BAR, DOUBLE CAGE ROTOR END RINGS AND ALL OF MOTOR BARS AND BAR JOINTS, HOUSING OF D.E. & NDE SHIELD BEARING HOUSINGETC. BEFORE WORK TO DETECT FAULT. |
| 11 | [RATE AS PER SCHEDULE OF RATES (2024-25), ELECTRICAL &MECHANICAL, DELHI JAL BOARD, ITEM NO. 31.17.31, PAGE-296] SUPPLYING AND DRAWING FOLLOWING SIZES OF FRLSPVC INSULATED COPPER CONDUCTOR, SINGLE CORE CABLE IN THE EXISTING SURFACE/ RECESSED STEEL/ PVC CONDUIT AS REQUIRED: 4 X 6 SQ. MM |
| 12 | Laying on Wall / surface with Saddles / clamps.(b)Laying of cableupto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (HOT Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 13 | Compression Glands.Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring FOR dust & moisture(proof entry of XLPE/PVC armoured cables as below : FOR4 core.iiupto 6 sqmm |
| 14 | Finishing cable ends.(b)Finishing the end of following XLPE/PVCarmoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.4 core6 sqmm cable |
| 15 | PLUMBING WORKS (A)-(III) CPVC PIPE WORKS AND FITTINGS(A)-(III) CPVC PIPE WORKS AND FITTINGS Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories,specials viz. socket,bend,tee,union,cross,elbo,nipple,longscrew, reducing socket,reducing tee, short piece etc.fitted with holder bats clamps, including cutting pipes,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work(i) CPVC Pipes Class-1, SDR-11 (Dia) 50 mm |
| 16 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 4.Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (iv) 50 mm dia |
| 17 | SECTION(A) PLUMBING WORKS (A)-(VI) TUBE WELL (a) OriginalWorks 12 Supplying,fitting and fixing check valve (horizontal) G.M. tested to 21 kg per sq. cm.(vi) 50 mm |
| 18 | SECTION(A) PLUMBING WORKS (A)-(VI) TUBE WELL (a) OriginalWorks 22 Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete. |
| 19 | Sub Total |
| 20 | GST 18% |
| 21 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender