Tender For Construction Of Parking, Vendors Market And Office Complex Municipal Council At Dehra Tehsil Dehra, Tehsil Dehra District Kangra, (H.P.). Deposit Work.(Sub Head : Construction Of Building Portion Including Water Supply & Sanitary Installat
Tender Value
4.71 Crore
Estimated cost
Bid Submission
13 Nov 2026
6 days left
EMD
9.44 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Parking, Vendors Market And Office Complex Municipal Council At Dehra Tehsil Dehra, Tehsil Dehra District Kangra, (H.P.). Deposit Work.(Sub Head : Construction Of Building Portion Including Water Supply & Sanitary Installation And Rain Water Harvesting System Etcetera.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains of soil such as pick work, jumper work, blasting work, jumper blasting work soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including dewatering removal of slush and stacking the serviceable and unserviceable material clear from the edge of excavation and as per direction of Engineer-In-Charge and returning the stacked soil in 15 cm (Fifteen centimetre) layers, when required into plinths, side of foundation etcetera consolidating each deposited layer by ramming watering and then disposing of all excavated earth as directed by the Engineer-in-charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 2 | Excavating trenches of required width for pipes, cables, etcetera including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth including getting out the excavated soil, then returning the soil as required, in layers not exceeding 20 cm (Twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus materials/excavated soil as per specification, approved drawing, design, specification and as per the entire satisfaction of Engineer-in-charge, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. . |
| 3 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 4 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings balconies etecetra including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 5 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels sides and soffits of beams haunchings, cantilevers, bressumers and lintels upto all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 6 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillar, piers, abutments, post and struts square, rectangular, polygonal etcetera upto all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 7 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in edges of slab and breaks in floors and walls any thickness and upto all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 8 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuutering, strutting and propping etcetera with wooden battens and ballies for all height/depths and removal of the same for insitu-reinforced concrete & plain concrete work in window sills, cornice and moulding and the like upto all floors level including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 9 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all height/depths and removal of the same for insitu-reinforced concrete & plain concrete work in weather shades, Chhajjas, corbels etcetera including edges including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 10 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Walls (any thickness) ecetera complete upto all floors level including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 11 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in stairs cases with slopping or stepped soffits, (excluding landing) except spiral staircase upto all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 12 | Providing and laying in position cement concrete 1:4:8 (One cement isto four sand isto eight graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and vibrated including curing complete excluding the cost of centering and shuttering in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 13 | Filling in plinth with hard stone under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 14 | Supplying and filling broken/ crushed stone/ brick bats of hard stone of 40 mm (forty millimetre) size in filter tank as per HPPWD specifications complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 15 | Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 16 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five ) design mix to obtain the compressive strength of 25 N/mm square (Twenty five Newton per square millimetre) for reinforced cement concrete work, using cement contents not less than @360 kg/cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix for the work upto plinth level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 17 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the compressive strength of 25 N/mm square (Twenty five Newton per square millimetre) for reinforced cement concrete work, using cement contents not less than @ 360 kg/cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix for All works above plinth level to all floor level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 18 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:2:4 (One cement isto two sand into four graded stone aggregate 40mm (Forty millimetres) nominal size) and curing complete excluding cost of form work in foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 19 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6 (One cement isto three sand isto six graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 20 | Coursed rubble masonry1st sort with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 (One cement isto six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 21 | Providing Tor steel reinforcement Thermo Mechanically Treated bars of grade Fe-500D of Tata Tiscon/Sail/Jindal Panther for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per approved specifications, drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 22 | Providing and laying Damp Proof Course 100mm (One hundred millimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded/crushed stone aggregate) 12.5mm (twelve decimel five millimetre nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 23 | Providing and applying a coat of residual petroleum bitumen of grade VG-10 (Viscosity grade-Ten) of approved quality using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 24 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in superstructure above plinth up to all floor level in cement mortar 1:4 (One cement isto four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 25 | Brick work using Second class common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 26 | Brick work using Second class common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:4 (One cement isto four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 27 | 40CM (Forty centimetre) thick Cavity wall second class common burnt clay building bricks in wall with 17 cm (Seventeen centimetre) in wide cavity and consisting 11.5 cm ( Eleven decimal five centimetre) thick inner and outer wall 11.5 cm ( Eleven decimal five centimetre) laid in cemnet mortar 1:4 ( one sand isto four sand) and strength with hoop iron and bituminious coated cross ties including making weep hole in vent pipe complete 2 Nos. (two numbers ) 6/8 ( six / eight) width brass in Z- shape crossing each other shall be provided at the interval 90-100 cm ( ninety - hundred centimetre) length horizontal and vertical in cavity wall and curing complete. (The mesurement of wall faces only one side will be considered for payment), as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax and any other taxes imposed by the Government |
| 28 | Providing and fixing coloured coated / anodised aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal/Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera (Section No. 14081, 4524 and 4526 of Jindal / Hindalco etcetera). Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 29 | Providing and fixing coloured coated/ anodised aluminium work for shutter of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required diametre and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 30 | Providing and fixing factory made P.V.C. door frame single rebate of any colour of size 50x47 mm (Fifty into forty seven millimetres) with a wall thickness of 5 mm (Five millimetres), made out of extruded 5mm (five millimetre) rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 (Two) Nos of 150 mm (One hundred fifty millimetres) long brackets of 15x15 mm (Fifteen into fifteen millimetres) M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm (Nineteen into nineteen millimetres) M.S. square tube of 19 (Nineteen) gauge, EPDM rubber gasket weather seal to be provided through out the frame including fixing of door frame to be fixed to wall with M.S. screws of 100 mm (One hundred millimetres) long with wooden or rawl plugs embedded in masonry complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 31 | Providing and fixing to existing door frames, 30mm (Thirty millimetres) thick factory made PVC door shutter consisting of frame made out of M.S. tubes of 19 (Nineteen) gauge thickness and size of 19 x 19 mm (Nineteen into nineteen millimetres) for styles and 15x15 mm (Fifteen into fifteen millimetres) for top & bottom rails, (Code no. 9.120 ) of Rajshri M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm (Five millimetres) thick heat moulded PVC 'C' channel of size 30 mm (Thirty millimetres)thickness, 70 mm (Seventy millimetres) width out of which 50 mm (Fifty millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered in 45o (Forty five) degree angle on either side forming styles and 5 mm (Five millimetres) thick, 95mm (Ninety Five millimetres) wide PVC sheet out of which 75mm (Seventy Five millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered in 45 (Forty Five) degree on the inner side to form top and bottom rail and 115 mm (One hundred fifteen millimetres) wide PVC sheet out of which 75 mm (Seventy Five millimetres) shall be flat and 20 mm (Twemty millimetres) shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10 mm (Ten millimetres) thick, 20 mm (Twenty millimetres) wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm (Five millimetres) thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails , joints mitres and jointed with solvent cement adhesive including fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (One hundred into fifty into one point ninety millimetres) size with necessary screws etcetra complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 32 | Providing and fixing Fly proof stainless steel ( grade 304) wire guage with 0.5mm (Zero point five millimetres) diametre wire and 1.4mm (One point four millimetres) wide aperture for doors windows and clerestory windows with M.S. flat 15x3mm (Fifteen into three millimetre), including bright finished black enamelled iron butt hinges with necessary screws complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 33 | Providing and fixing 8mm (Eight milimetres) thick anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm (Two hundred millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 34 | Providing and fixing 12mm (Twelve milimetres) m thick (both Side ) prelaminated water proof particle board in matt finish flat pressed three layer or graded wood particle board conforming to IS: 12823 as per of Action Tesa / Century / Greenlam / Merinolam / Kitlam / Vista of approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera complete as per architectural drawings and directions of engineer- in-charge Prelaminated particle board with decorative lamination on one side and balancing lamination on other sidecomplete as per direction Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 35 | Providing and fixing 25mm (Twenty five millimetre) thick one side prelaminated water proof commercial board of Century Ply / kit ply exterior//interior grade ISI marked No. 12823 for SDB shutters with 6mm (Six millimetre) thick hard wood edging all round and PGI sheet lining inside of the shutters of approved shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax and any other taxes imposed by the Government but excluding GST. |
| 36 | Providing and fixing 6 mm (Six millimetre) thickness (weight not less than 15.00 kg/ sqm) (Fifteen point zero zero kilogram per sqaure metre) Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax and any other taxes imposed by the Government but excluding GST. |
| 37 | Providing and fixing 5mm (Five millimetre) thickness (weight not less than 12.50 kg/ sqm) (Twelve point five zero kilogram per sqaure metre) Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax and any other taxes imposed by the Government but excluding GST. |
| 38 | Providing and fixing 4mm (Four millimetre) thickness (weight not less than 10.00 kg/ sqm) (Ten point zero zero kilogram per sqaure metre) Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax and any other taxes imposed by the Government but excluding GST. |
| 39 | Providing and fixing 25mm (twenty five millimetres) thick water proof Termite resistant commercial board of Uniply/ Green ply/Century ply/Kit ply /Duro ply / Marino (ISI Marked ) for cup board shutters including 19 mm (Nineteen millimetre) thick shelves and back side of the cup board shall be of 8 mm (Eight millimetre) thick ply and all cut portions of shutter shall have 6mm (Six millimetre) thick hard wood edging. The shutter from out side shall to be finished with 1mm (one millimetre) thick lamination of Century / Greenlam / Action Tesa / Merinolam of approved shade including fixing Top PTMT handles 125mm (One hundred twenty five millimetre) long shall be provided in wood colour with nickel plated piano hinges including fixing with nickel plated piano hinges with screws etcetera. (Area for Payment shall be measured for front face only) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 40 | Providing and fixing Cup-board shutter magnetic catcher with necessary screws etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 41 | Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) size special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete (Indian make approved quality) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 42 | Providing and fixing Stainless steel curtain rail with rollers stop ends and brackets in pelmets with curtain rod of 25 mm (Twenty five millimetre) diametre and brackets etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 43 | Providing and fixing 300x16mm (Three hundred into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 44 | Providing and fixing 250x16mm (Two hundred fifty into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 45 | Providing and fixing 250x10mm (Two hundred fifty into Ten millimetres) nominal size aluminium Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 46 | Providing and fixing 150x10mm (One hundred fifty into Ten millimetres) nominal size aluminium Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 47 | Providing and fixing 150mm (One hundred fifty millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 48 | Providing and fixing 125mm (One hundred twenty five millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 49 | Providing and fixing 250mm (Two hundred fifty milimetres) size aluminum hooks and eyes PILOT/ Sheel or equivelent with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 50 | Providing and fixing Aluminum die cost body tubular type universal hydraulic door closer (having brand logo with ISI IS:3564 embossed on the body, door weight upto 35kg (Thirty five kilogram) with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 51 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 52 | Providing and laying 19 mm (Nineteen millimetre) thick Chima Pink / Dark Brown Granite stone flooring in combonation with Lakha red granite/ Black Granite as per pattern and detail laid over 20mm(Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing, Semi / Round Nosing, edging and moulding wherever required etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 53 | Providing and laying 19 mm (Nineteen millimetre) thick Cheema Pink / Dark Brown Granite in combination with Lakha Red / Black Granite as per pattern and detail laid over 20 mm (twenty millimetre) average thickness base of cement mortar 1:3 (One cement isto Three sand) and Joineted with grey cement slurry mixed with pigment to match the shade of granite stone pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 54 | Providing and laying 19 mm (Nineteen millimetre) thick Polished Grey/Chima Pink Granite Stone having Semi / Round nosing in work top of Pantary / under counter wash basin and water trough laid over 20mm (twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 55 | Providing and laying 19 mm (Nineteen millimetre) thick finished with flamed dark brown Granite Stone in single piece with uniform nosing / edging in steps of tread laid over 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 56 | Providing and Laying 8mm (eight millimetre) thick Prelaminated H.D.F. flooring / skirting of armstrong ambience crystal / Action Tessa / L.G. / Wonder (AC-5) as per approved shade & design, detail drawing and specification complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 57 | Providing and laying 600 X600 mm (Six hundred into six hundred millimetre) Full body Vitrified tiles of AGL / Orient -Bell / Nitco / Kajaria / Johnson / Simpolo / Somany of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (one cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 58 | Providing and laying full body matt finish Vitrified tiles of Restile /Johnson/ Nitco/Kajaria / AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office of size of tile 600x600 mm (Six hundred into six hundred millimetre) (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per square metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 59 | Providing and laying 400x400mm (Four hundred into Four hundred millimetre) 12mm (Twelve millimetre) thick Antiskid Matt Finish tile of AGL / Orient -Bell / Nitco / Kajaria / Johnson / Simpolo / Somany of aproved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 60 | Providing and laying 300x300 mm (Three hundred into three hundred millimetre) size antiskid ceremic tiles of premium quality of Nitco/AGL / RAK / SIMPOLO / Kajaria / Somany / Orient Bell /Johnson tiles as per approved shade in flooring in cement mortar 1:4 (One cement isto four sand) finished with flush pointing in white cement as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 61 | Providing and laying 300x450 mm (Three hundred into four hundred fifty millimetres) Ceremic Glazed tiles of Kajaria/ Nitco / Simpolo/Somany / Orient & Bell / AGL/Johnson in skirting risers of steps and dados with one Border matching /Contrast at top in cement mortar 1:3 (One cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 62 | Providing and laying 300x300x25 mm (Three hundred into three hundred into twenty five millimetres) Labrador Design ( Rainbow Series) tiles of NTC / Unistone / Atlantic in flooring in ramp for person with disability on 20mm (Twenty millimetres) average thick base of cement mortar 1:4 (One cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish as per architect standred design and specification complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 63 | Providing and laying 19 mm (nineteen millimetre) thick Green stone slab having Semi Round nosing in low height partitios walls etc. laid over laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 64 | Providing and laying 400x400mm (Four hundred into Four hundred millimetre), 14mm (fourteen millimetre) thick Parking tiles of NTC / Nitco / AGL / Simpolo / Kajaria / Somany / Johnson / Orient & Bell of aproved shade and design, in flooring / skirting laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (one cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 65 | Providing 50 mm (Fifty millimetres) thick cement concrete flooring 1:2:4 (One cement isto two sand into four graded stone aggregate 20mm (Twenty millimetres) nominal size) laid in one layer finished with a floating coat of neat cement complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 66 | Providing and fixing 50mm (Fifty millimetres) diametre SST (Stainless steel) pipe Of Kich handrail slip resistant in ramp at two level i e 75cm (Seventy five centimetres) and 90cm (Ninety centimetres) height welded with 25mm (Twenty five millimetres) diametre Stainless steel hollow pipe balusters embedded in cement concrete 60cm (Sixty centimaters) centre to centre and jointing with electrical gas welding at top alongwith hand rail of hollow Stainless steel pipe of 50mm (Fifty millimetres) diametre. It should extend 30cm (Thirty centimetres) beyond top and bottom of the ramp complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 67 | Providing and fixing 50 mm (Fifty millimetres) diametre SST (Stainless steel) pipe handrail fixed with 35 mm (Thirty five millimetres) diametre stainless steel baluster as per detail in combination of 35mm (Thirty five millimetres) diametre and 15/20mm (Fifteen/twenty millimetres) SST pipe baluster knock down railing of KICH hand rail fixed on 10x50mm (Ten into fifty millimetres) stainless steel flat balusters placed at 1200 mm (One thousand two hundred millimetres) centre to centre along with 3 nos (Three Numbers @ 16 mm (Sixteen millimetres) mid rail connected at the side of the baluster with fixtures .The baluster would be fixed on the floor with casted base plate minimum 6mm thick base plate shall be concealed with suitable S.S. 316 grade cover cap railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etecetra ., of required size, on the top of the floor or the side of waist slab with suitable arrangement complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 68 | Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheets of Tata / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating fixing with prepainted iron J or L hooks, bolts & nuts 6mm (Six millimetres) dia & prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 69 | Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametre with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 70 | Providing and fixing 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheet (ISI Marked-Z 120) of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametre with prepainted limpet and rubber washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 71 | Providing and fixing polycarbonated tranparent sheet 1.20mm (one point twenty millimetre) thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 72 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm (eight millimetre) diametre G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etecetra The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% (zero point three percent) ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 73 | Providing and fixing 30cm (Thirty Centimetre) wide 25cm (Twenty five centimetre) deep 0.60mm (Zero point six zero millimetres) thick prepainted plain P.G.I. sheet gutter of Tata / Sail having dome shape grating fixed with bolts, nuts and washers etcetera including making necessary connections with rain water pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 74 | Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetres) thick eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-Incharge (Base members of steel work shall be measured and paid separately) including fixing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 75 | Providing and fixing flushing 38cm (Thirty eight centimetre) overall with 0.60mm (Zero point six zero millimetre) thick prepainted sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 76 | Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD ( P - 3160- 3mm (Three millimetres) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero square meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm (Three hundred millimetres) vertically. The 2nd (Second) coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st (First) coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement isto four sand) and mixed with Pidiproof LW at the rate 200mm (two hundred millimetre) 50 kg (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 77 | Providing and fixing 150 mm (One hundred fifty millimetres) diametre on wall face PVC (D-Plast) rain water pipes of working pressure 4/6 Kg/cm2 (Four/six kilograms/per centimeters square) ISI marked of Finolex / Relpipe (Reliance)/Vectus including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 78 | Providing and fixing 150mm (One hundred fifty millimetres) diametre Plain bend on wall face PVC rain water pipes working pressure 4/6 K.g/cm2 (Four/six kilogram/per centimetres square) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 79 | Providing and fixing 150mm (One hundred fifty millimetres) diametre Shoe on wall face PVC rain water pipes working pressure 4/6 K.g/cm2 (Four/six kilogram/per centimetres square) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 80 | Providing and fixing 150mm (One hundred fifty millimetre) diametre PVC clamps of approved design to PVC rain water pipe including cost of cutting holes and steel screws, rawal plug and making good the walls etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 81 | Structural steel work of TATA / SAIL welded in built up sections in trusses and framed work trussed purlins in buildings including cutting hoisting, fixing in position and applying a priming coat of approved steel primer complete in all respect as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 82 | Providing and fixing M.S. channels Frames 75x40x4 mm (Seventy five into forty into four millimetres) M.S. angle iron 25x20x3 mm (Twenty five into twenty into three millimetres) for doors, windows, frames manufactured from M.S. T - section 25x 25x 3 mm (Twenty five into twenty five into three millimetres) and Z- Sections with M.S. flat 75x4mm (Sevety five into four millimetres) in combination as per drawing and design including hinges, jamb, lock jamb beed and if required thrashold including thrashold of M.S. angles means lugs, with split and tails to each jamb including iron butt hinges 2.5mm (Two point five millimetres) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 83 | Steel work of Tata / Sail welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete in all respect as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 84 | Painting two coats (Including priming coat) on new steel and other metal surfaces with enamel paint of Nerolac / Asian brushing of approved shade to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 85 | Painting two coats (including priming coat) on over new wood and wood based surfaces with enamel paint of Nerolac/ Asian brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 86 | 6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement isto three sand) up to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 87 | 15mm (Fifteen millimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 88 | 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 89 | 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:5 (One cement isto five sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 90 | Forming Groove of uniform size 15mm (Fifteen millimetres) wide and 15mm (Fifteen millimetres) deep including scaffolding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 91 | Providing and laying 20 mm (Twenty millimetres) thick Pattern in cement Plaster With cement Mortar 1:4 (One cement isto four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 92 | Providing Plinth protection with 40 mm (Forty millimetres) thick interlocking paver blocks of NTC with 23cm (Twenty three centimetres) diametre Half round reinforced cement concrete pipe for drainage purpose fixed over 10cm (Ten centimetres) thick cement concrete 1:4:8 (One cement isto four sand isto eight graded) stone aggregate bedding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 93 | Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic stone cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 94 | Applying Birla / J.K white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 95 | Finishing walls with apex weather proof exterior emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram/per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives for new work (Two or more coats applied @ 1.43 litre/ 10 sqm. (One point forty three litre/per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point ninety litre/per ten square metre) upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 96 | Wall painting (two or more coats) with acrylic washable emulsion of Asian paints / Berger paints/ Dulux paints/Nerolac paints (above Dado/skirting) of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 97 | Wall painting with premium acrylic emulsion paint of approved shade of Asian paints/ Nerolac paints / Berger Paints/ Dulux paints of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre (Fifty grams/litre) of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 98 | Wall painting with acrylic emulsion paint, Asian paints / Dulux paints / Nerolac paints / Berger Paints/ having VOC (Volatile Organic Compound ) content less than 50 (fifty) grams per litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 99 | Providing and fixing 595x595x6 mm (Five hundred ninety five into fiive hundred ninety five into six millimetre) designer board of everest ( E-Board) ceiling with pre-painted GI channel framing @ 600 mm c/c (Six hundred millimetre centre to centre) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 100 | Providing and fixing 600x600x16 mm (Six hundred into six hundred into sixteen millimetres) Dune RH 99 tiles of Armstrong / mineral fibre false ceiling tiles of Gyproc/600x600x15 (Six hundred into six hundred into fifteen) ceres soft fiber tiles of Dexune & with wood wool backing 40mm (Forty millimetres) thick layer and fix with power coated T-Grid work @ 600 (Six hundred) centre to centre in combination with 150x12mm (One hundred fifty into twelve millimetre) thick RAI wood border as per pettern complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 101 | Providing and laying 8 mm (eight millimetre) thick teak ply over 50x31 mm (fifty into thirty one millimetre) soft wood grid frame work at 600 mm (Six hundred millimetre) centre to centre with decorative teak wood beading over teak ply of size 25 x 12 mm (twenty five into twelve millimetre) having moulding on both sides. cornice / edging on top of panelling to be finished with 55 x 30 mm (fifty into thirty millimetre) teak wood beading, as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 102 | Providing and fixing acoustical wall panels of 600x1200x25mm (Six hundred into one thousand two hundred into twenty five millimeter) of Dexune acoustical / Prolad / Himalyan acoustical panels fixed with steel screw complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 103 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm (three millimetre) thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 104 | 12.5 mm (twelve point five millimetre) thick 7.5 cm (Seven point five millimetre) wide raised band in Plaster with cement mortar 1:4 (One cement isto four sand) complete as per Architectural drawing ,design and specification including scaffolding etc. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 105 | Providing and laying 60mm (Sixty millimetres) thick factory made cement concrete interlocking paver block of NTC / Unistone / Atlantic vibro compacted upto M-50 (M-Fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (Twenty five millimetres) thick average thickness of cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 106 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm (twenty seven point five centimetre) long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 107 | Providing and fixing ball bearing for rolling shutters complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 108 | Treatment of soil under proposed floors in proportion of dilute compound by using 1.0(one) litre water @ 2.5 (at the rate two point five) millilitre chemical emulsion (Imidacloerid 30.5% SC) and using diluted compound @ one litre per hole, 300 mm (three hundred millimetre) and laying of PVC pipes condiuts of approved make (Termi Pores/ Irrigate Pores) apart including drilling 12 mm (twelve millimetre) diameter holes and plugging with cement mortar 1:2 (one cement isto two Coarse sand) to match the floor: The laying of material shall be got done through the authorised applicator of the manufacturer of material complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 109 | Applying cement slurry on Reinforcement Cement concrete slab or cement concrete work using 2.75 kgs. (Two point seventy five Kilogram) of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 110 | Providing and fixing 1620 (20mm (Twenty millimetre) OD pipe) Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 111 | Providing and fixing 2025 (25mm (Twenty five millimetre) OD pipe) Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra with clamps at 1.00 metre (One metre) spacing concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 112 | Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetres to Forty milimetres) nominal bore by providing and fixing tees including cutting and threading the pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 113 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter High pressure PVC waste and ventilating pipes With working pressure 4/6 kg/cm2 (Four/six kilogram per centimeters square ISI marked of Finolex/Relpipe (Relience)/Vectus including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 114 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter High pressure PVC waste and ventilating pipes With working pressure 4/6 kg/cm2 (Four/six kilogram per centimeters square ISI marked Finolex/Relpipe (Relience)/Vectus including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 115 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C clamps of Finolex / Relpipe (Relience) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 116 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter P.V.C clamps of Finolex / Relpipe (Relience) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 117 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C. heal rest of Finolex / Relpipe (Relience) / Vectus conforming to IS no-14735-99 including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 118 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter P.V.C. heal rest of Finolex / Relpipe (Relience) / Vectus conforming to IS no-14735-99 including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 119 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C. plain bend of Finolex / Relpipe (Relience) / Vectus conforming to IS No.-14735-99 including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 120 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter P.V.C. plain bend of Finolex / Relpipe (Relience) / Vectus conforming to IS No.-14735-99 including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 121 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter ISI marked PVC collar of Finolex / Relpipe (Relience) / Vectus complete upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 122 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter ISI marked PVC collar of Finolex / Relpipe (Relience) / Vectus complete upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 123 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C cowl of Finolex / Relpipe (Relience) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 124 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter P.V.C cowl of Finolex / Relpipe (Relience) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 125 | Providing and fixing 110x90mm (One hundred ten into ninety millimetre) nominal size ISI marked P.V.C floor trap of Finolex / Relpipe (Relience) / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 126 | Providing and fixing 110x75mm (One hundred into seventy five millimetre) nominal size ISI marked P.V.C floor trap of Finolex / Relpipe (Relience) / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 127 | Providing and fixing vitreous China wash down water closet (European type W.C. pan) of Constellation No. S No. 20087(S-10) size 57x35x39cm (Fifity seven into thirty five into thirty nine centimetre) with 10 litre (Ten litre) low level PVC flushing cistern (Sleek plus) having dual flush system of Hindware /Cera/ Jaquar of star white / snow white shade with fitting and brackets, 40 mm (Forty millimetres) flush bend, 20 mm (Twenty millimetre) over flow pipe, with seat & lid fixed with C.P. brass hinges and rubber buffers,with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and fixed with jet pressure and intergal P or S trap including jointing the trap and soil pipe with adhesive of approved brand. (Jet Spray to be measured and paid for separately) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 128 | Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm (Five hundred thirty into four hundred ten millimetre) with integral type foot rests with 100 mm (One hundred millimetre) sand cast Iron P or S trap, 10 litre (Ten litre) low level P.V.C. flushing cistern,of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 129 | Providing and fixing 32 mm (Thirty two millimetre) diametre P.V.C. flexible waste pipe of Finolex / Relpipe (Reliance )/Vectus for sink or wash basin including P.V.C. waste fittings complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 130 | Providing and fixing G.I. inlet connection pipe for each flush pipe with W.C. pan complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 131 | Providing and fixing vitreous China under counter wash basin Garnet No.10080 size 58x43cm (Fifty eight into forty three centimetre) of HINDWARE/CERA/JAQUAR of star white/snow white shade including 15mm (Fifteen millimetre) C.P. brass tap, 32mm (Thirty two millimetre) C.P. brass waste with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same including fittings complete (mirror to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 132 | Providing and fixing Vitreous China wash basin Delta No.10010 without pedestal size 55x40 cm ( fifty five into forty centimetre) of HINDWARE/CERA/ JAQUAR with mirrior above of star white / snow white shade with single hole for pillar tap including 15mm (Fifteen millimetre) C.P brass Pillar Tap , 32mm (Thirty two millimetre) C.P brass waste with C.I. or M.S. brackets painted white including cutting holes and making good the same including fittings complete (Mirror to be measured and paid for seperately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 133 | Providing and fixing white vitreous china range of three flat back half stall urinal Large flat back no 60002 of size 39x37.5 x59 cm (Thirty nine into thirty seven point five into fifty nine centimetre) with white PVC automatic flushing cistern of Hindware/Cera/Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required with 10 litre (Ten litre) P.V.C. automatic flushing cistern complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 134 | Providing and Fixing Charomium plated 40mm (forty millimetres) diametre steel pipe for grab bars at 78cm (seventy eight centimetres) height M.S. plate as per details at the position of the seat and Wash Basin complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 135 | Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with seat and lid, 10 litre (Ten litre) low level white vitreous china flushing cistern Hindware/Cera/Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm (Forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 136 | Providing and fixing wash basin White Vitreous China Flat back Matrix wash basin 550x400mm (Five hundred fifty into four hundred millimetre) of Cera / Hindware / Jaquar with single 15 mm (Fifteen millimetre) C.P. brass pillar tap with C.I. brackets, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 137 | Providing and fixing stainless steel single bowl kitchen sink of size 46 x 40 cm (forty six into forty centimetre) of cera / Hindware / Jaquar with drain board and C.P waste with C.I or M.S brackets painted white including cutting holes in walls and making good the same complete as per Architectural drawing ,design and specifications complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 138 | Providing and fixing 32mm (Thirty two millimeters) dia M.I. unions for wash basin and sink complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 139 | Providing and fixing PVC connection pipe ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore with brass unions complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 140 | Providing and fixing 15mm (Fifteen millimetre) nominal/bore/diametre Mixer for kitchen sink with casted swinging spout at top Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 141 | Providing and fixing 32mm (thirty two millimeters) nominal diameters C.P waste for wash basin or sink complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 142 | Providing and fixing 15mm (Fifteen millimetre) nominal/bore/diametre two hole basin mixing Faucet of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 143 | Providing and fixing 100mm (One hundred millimetre) diametre chromium plated grating of superior quality for floor, gully or nahani trap complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 144 | Providing and fixing 75mm (Seventy five millimetre) diametre chromium plated grating of superior quality for floor, gully or nahani trap complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 145 | Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 146 | Providing and fixing C.P. brass towel rail 600x20mm (Six hundred into twenty millimetre) of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 147 | Providing and fixing liquid plastic soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 148 | Providing and fixing chromium plated brass toilet paper holder of approved brand and manufacture continental series of Jaquar/classik series of Hindware/floral series of Cera / Vintag series of Kerovite/Hindon series of Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 149 | Providing and fixing 8 mm (Eight millimetre) diametre C.P. / S.S. Jet of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite/Hindon series of Jal with flexible tube upto 1 metre (One metre) long with S.S. triangular plate to Eureopean type W.C. of approved quality and make as approved complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 150 | Providing and fixing 600x120x5 mm (Six hundred into one hundred twenty into five millimetre) glass shelf Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite/ Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm (Forty millimetre) long screws, rawl plugs etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 151 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass bib tap of continental series of Jaguar/classik series of Hindware/floral series of cera/vintage series of kerovite/Hindon series of jal ISI marked of approved quality (superior or heavy type) and colour of prayag polynets syonet complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 152 | Providing and fixing 15mm (Fifteen millimeter) diametre CP brass stop cock of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 153 | Providing and fixing 15mm (Fifteen millmeters) C.P. brass angle valve of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal without nuts and pipes complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 154 | Providing and fixing 15 mm (Fifteen millimeter) nominal bore, CP, push cock of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal without nuts and pipes complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 155 | Providing and fixing 15mm (Fifteen millimeters) nominal bore brass full way valve with wheel of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 156 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass valve (Horizontal plunger type) High pressure with polythene plastic floats of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 157 | Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C single equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 158 | Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C single equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 159 | Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C double equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 160 | Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C double equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 161 | Providing and fixing 110mm (One hundred ten millimetre) diametre PVC door bend with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 162 | Providing and fixing 75mm (Seventy five millimetre) diametre PVC door bend with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 163 | Providing and fixing 110mm (One hundred ten millimetre) diametre PVC offset 45° (Forty five degree) of Finolex / Relpipe (Relience) / Vectus ISI marked including fixing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 164 | Providing and fixing 75mm (Seventy five millimetre) diametre PVC offset 45° (Forty five degree) of Finolex / Relpipe (Relience) / Vectus ISI marked including fixing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 165 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Finolex / Relpipe (Relience) / Vectus having tripple layer of IS No: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings but excluding the base support for tank complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 166 | Providing and laying cement concrete 1:5:10 (One Cement isto Five Sand isto Ten graded stone aggregate 40mm (Forty millimetre) nominal size ) all round for PVC. pipes of 150mm (One hundred fifty millimetre) internal diameters, including bedding , necessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 167 | Constructing brick masonry manhole in cement mortar 1:4 (One cement isto Four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (One cement isto One and half coarse sand (zone- III) isto Three graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cm (Ninety into eighty centimetre) and 45cm (Forty five centimetre) deep including C.I. cover with frame (light duty) 455x610mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg (Thirty eight kilograms) (weight of cover 23 kg (Twenty three kilograms) and weight of frame 15 kg (Fifteen kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 168 | Constructing brick masonry manhole in cement mortar 1:4 (One cement isto Four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (One cement isto One and half coarse sand (zone- III) isto Three graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90cm (One hundred twenty into ninety centimetre) and 90cm (Ninety centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg (Thirty eight kilograms) (weight of cover 23 kg (Twenty three kilograms) and weight of frame 15 kg Fifteen kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 169 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (One cement isto Four coarse sand) C.I. cover with frame (light duty) 455x610mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover with frame to be not less than 38 kg (Thirty eight kilograms) (weight of cover 23 kg (Twenty three kilograms) and weight of frame 15 kg (Fifteen kilograms) ), R.C.C. top slab with 1:1.5:3 mix (One cement isto One and Half Fine sand isto Three graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:5:10 (One cement isto Five fine sand isto ten graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelev millemetre) thick with cement mortar 1:3 (One cement isto Three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 455x610 mm (Four hundred fifty five into six hundred ten millmetre) and 45 cm (Forty five centimetre) deep for single pipe line complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 170 | Providing and fixing 600x300mm (Six hundred into three hundred millimetre) vitreous china division plate for urinals of Hindware/cera/Jaquar of star white / snow white shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 171 | Providing and laying 20 mm (Twenty millimetre) nominal bore in trenches, galvanised mild steel tubes (medium grade) with G.I fittings including trenching and refilling etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 172 | Providing and fixing 15mm (Fifteen millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 173 | Providing and laying 150mm (One hundred fifty millimetre) nominal bore/diameter (to level or slopes) PVC pipe of Finolex/Relpipe (Reliance)/vectus of grade 'A' and jointing with approved adhesive ncluding testing of pipes and joints complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 174 | Providing and fixing 455x610mm (Four hundred fifty five into six hundred ten millimetre) light duty rectangular C.i. manhole with frame cover weight 38Kg (Thirty eight kilograms) (single seat) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. |
| 175 | Provision for water lifting pump 1.00 (One) horse power.including all necessary fittings complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax and any other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender