Tender For miscellaneous Development And Other Work At Court Complex Building, Jodhpur Metropolitan, Jodhpur
Tender Value
1.04 Crore
Estimated cost
Bid Submission
16 Nov 2026
6 days left
EMD
2.09 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for miscellaneous Development And Other Work At Court Complex Building, Jodhpur Metropolitan, Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 2 | Add extra if square, rectangular hollow tubular sections are used. |
| 3 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formaldehye resin, in glue both sides with approved steel fittings complete as per Annexure ‘A’ IS 2202 (Part I & II) 1999/1983.Decorative Teak veener both side 35 mm thick shutter |
| 4 | Add extra for Flush doors For double leaf shutter |
| 5 | P & F Plain Fiber glass sheet (FRP sheet fiber Reinforcement product sheet confirming to IS:12866-1989 having minimum thickness as below including fixing with nuts bolts hooks and bitumen washer etc. complete.)3.0 mm thick (Wt.5.0 Kg./Mtr.Sq.) |
| 6 | Add extra for corrugated Fiber glass sheet as per Asbestos cement profile/ steel profile over item No. 10.50 |
| 7 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 8 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed: All kinds of soil. |
| 9 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000:1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size |
| 10 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall IS 1597 (Part-I) 1992 in :Cement Sand Mortar 1:6 (1-Cement:6-Sand). |
| 11 | Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls IS 1597 (Part-I) 1992 in :Cement Sand Mortar 1:6 (1-Cement:6-Sand). |
| 12 | Add extra for rock facing using Jodhpur white sand stone with porper projection and chiesel dressing of edges of stone 2 line dressing for building corners,jambs including uniform joints. |
| 13 | Extra for facing as per design and detailed specifications IS 1597 (Part-II) 1992 including additional cost of stones over item No. 6.1 & 6.2 for :Course rubble Second First Sort. |
| 14 | Supply and fixing Jodhpur sand stone Machine cut Dash, Coping,sill,lintel fixed in cement sand mortar 1:4.(B) 9 cm (3.5\\") thick |
| 15 | Pointing on stone masonary in cement sand mortar 1:3 (1-Cement:3-Sand) :Deep grooved pointing |
| 16 | Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. with 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge. |
| 17 | Supplying and fixing stone liri in CM 1:4 work facing with proper projection and chiesel dressing of edges of stone two line dressing of building corners, jambs etc. including uniform joints using aluminium square section of size 12 mm to 15 mm as per requirement of course and width of stone not less than 12 Cm., with requisite number headers (minimum length of stone 0.9 M) 6 cm. to 9 Cm. thick. |
| 18 | Supplying and fixing Jodhpur machine cut stone Kadau 29cm (11.5\\")hight in CM 1:4 with rock facing with proper projection and machine cut edges of stone, two line dressing of building corners, jambs etc. including uniform joints using aluminium square section of size 12 mm to 15 mm as per requirement of course and width of stone not less than 12 Cm., with reqisite humber headers (minimum length of sotne 0.9 M) |
| 19 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of IS 3316-1974 :Jhansi (Red / Choclate Colour) Size 1501 to 3600 Cm2 |
| 20 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of IS 3316-1974 :Jhansi (Red / Choclate Colour) Above 3601 Cm2 Slab |
| 21 | Extra for providing edge moulding to 18 mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work. |
| 22 | Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). For Fixed portion |
| 23 | For shutters of doors, windows & ventilators incl. providing and fixing hinges/ rollers etc. and making provision for fixing of fittings wherever reqd. (lockes shall be paid for separately). |
| 24 | Providing and Fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade-I, Type-II confirming to IS 12823 bonded formaldehyde synthetic resin of approved brand and manufacture in paneling fixed in aluminium doors, windows/ stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 25 | P&F expanded grill made of anodised aluminium as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminium window/ vent with reqd. screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. |
| 26 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.) With tinted glass panes of 5.0mm thickness (weight not less than 13.75 Kg/ Sqm) |
| 27 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make.160mm dia |
| 28 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make.Bend 87.5 Dg.110mm dia |
| 29 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make.Pipe Clip 110mm dia |
| 30 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make.Socket Plugs 110mm dia |
| 31 | Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth 1.2 mtr |
| 32 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete as per Rajasthan P.W.D. specifications : (Width W = Diameter of pipe in Cm+40 Cm.) (Excluding cost of pipe).150mm dia S.W. Pipe. |
| 33 | P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc.80mm dia nominal bore. |
| 34 | Supplying & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250x40x3mm fixed with M.S. bolt 5 mm dia 50 mm long duly embedded in cement concrete M-15 grade IS 4121-1967 : Ghana teak wood Grade - I |
| 35 | Providing and fixing Nigeria Ghana Teak wood grade – I mouldings and beadings in droops and windows size :-50x20 mm |
| 36 | Providing and laying Melamine Polish of two or more coats to give on even shade on wood work with superior grade. |
| 37 | HORTICULTURE WORKSSupply of different varieties of tree / shrubs / climbers according to height and age of the plant at site including loading/unloading and transportation etc. complete.Different flowing plant 900mm to 1500mm. |
| 38 | Supply of different varieties of Bougainvillea in poly bags/earthen pots according to height growth and age of plant at site including loading/ unloading and transportation etc. complete.Local variety of Bougainvillea 600mm to 900mm. |
| 39 | Different variety of Bougainvillea 600mm to 900mm. |
| 40 | Supply of different sized pots at site store including loading unloading & transportation etc. complete.Cement pot 300 mm size |
| 41 | Supply of different varieties of palms indoor plants in polyethylene bags / earthen pots according to height growth and age of plant at site including loading/ unloading and transportation etc. complete.Rubber plants etc. |
| 42 | Areca Palm. |
| 43 | Different Fycus Plants Topairy 3'-4' height Please Enable Macros to View BoQ information |
| 44 | Providing ,making and fixing dias table furniture(Top of dias table)on rack support ,made of 35mm thick Block board of approved ISI make and laminated with 1mm thick laminated sheet on both sides matching with wall panelling shade and design by means of adhesive, nails, screws rawl plugs etc ,all the edges of table top are restored by fixing of moulded teak wood 37x25 mm beading with the help of nails,adhesive etc complete with melamine polish with all repect as per enclosed drawing and the direction of Engineer -in- charge (Top plan area of block board will be measured for payment) |
| 45 | Providing ,making & fixing table almirah shutters ,made of 25mm thick Block board of approved ISI make and laminated with 1mm thick laminated sheet on both sides matching with wall panelling shade and design by means of adhesive, nails, screws rawl plugs etc ,edges of all these members are restored by fixing of plain/moulded teak wood 27x10 mm beading with the help of nails,adhesive etc complete with melamine polish for and required stainless steel fittings such as hinges,handles,tower bolts,magnets,chains & lock (Godrej make) etc with all repect as per drawing and the direction of Engineer -in- charge (Area of block board will be measured horizontal & vertical for payment) |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender