Tender For Repairs To 4 Cusec X 30 M Head Pump Of Pumping Unit No.3 Along With Allied Works At Lis Didwara,Billawar.
Tender Value
99000
Estimated cost
Bid Submission
13 Nov 2026
0 days left
EMD
1980
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To 4 Cusec X 30 M Head Pump Of Pumping Unit No.3 Along With Allied Works At Lis Didwara,Billawar.
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to 4 cusec x 30 m head pump of pumping unit no.3 along with allied works at LIS Didwara,Billawar. |
| 2 | Decoupling of 4 cusec x 30 meter head discharge pump unit no 3 from 75 hp motor and then dismantling the pump from the base frame. Carriage & shifting of the pump to workshop by carriage vehicle. Repair to 4 cusec x 30 meter head discharge end suction pump of pumping unit no 3 of Lift irrigation station, Didwara by dismantling and extraction of all worn out parts i.e. pump shaft, impeller, bearings, sleeves, bush, check nuts, nuts & bolts, gland plate, gland studs. Properly cleaning the internal surface of pump casing. Providing and fitting 2 no.’s of new bearings on driving and non-driving end of the pump, 2 no.’s neck rings, 2 no’s shaft protection sleeves, 1 no. check nut, nuts & bolts, fabrication of 2 no.’s new gland plate with providing and fitting of 2 no.’s new gland studs on ends of pump. Reassembling all parts of pump with proper greasing of bearings and providing and fitting of gasket sheet between upper and lower part of the pump. Providing and fitting of graphite packing of suitable size on both ends of pump. Providing of extra 3kg graphite packing of size 10 mm. Repairs to 250 mm dia foot valve assembly of pumping unit no.03 installed at LIS Didwara. The job involves disconnecting/dismantling of the foot valve assembly from the suction pipe by deploying manual labour and allied tools & tackles. Shifting/transporting to the workshop. Cleaning by washing with water to make the foot valve completely silt free. After drying them completely, carrying out necessary repair works on the valve surfaces and flanged joints by welding using good quality electrodes. Dismantling of damaged/worn-out foot valve mechanism with flap & rings etc. Complete repair to the damaged flap plate and strainer by way welding. Providing / fitting of new rubber washer cut as per size of the flap plate. Reassembling the foot valve and transporting back to the installation site at LIS. Fitting the valve to the suction line with replacement of damaged rubber gasket of flanged joint and worn-out nuts, bolts etc. Repairs to 350 mm (NB) reflux valve by way of dismantling reflux valve from delivery side of the rising main. The job involves extraction of broken flap of reflux valve. Providing and fitting of new flap with locking sheet. Replacement of hinge and hinge pin of the valve. Fitting of the valve on the delivery line with providing and fitting of new nuts and bolts along with rubber sheet to prevent leakage.Repairs to star delta starter cum panel of 75 HP of unit no .3 at LIS Didwara by way of disconnecting the starter cum panel from incoming and outgoing electric supply. Dismantling of contactors, bus bars and internal wiring. Replacement of the worn-out/ damaged bus bars by way of providing and fitting of new bus bars as per requirement and repair to internal wiring. Servicing of MCCB 250 Amp. by dismantling all internal parts and cleaning to remove all carbon deposits using CTC solution. Completely assembling all the replaced and serviced parts. Replacement of damaged internal control wiring. Testing the starter on no load and then on full load.The complete job includes cost of material, (skilled/unskilled) labour charges, loading & unloading, to &fro carriage, testing and installation and hire charges of tools & tackles used during the execution of job. Complete Job.NOTE:1.The contractor/firm must ensure safety mechanisms for the workers and material involved during the execution of job at the site, as the sole responsibility lies with the contractor/firm.2.The tenderers are requested to visit the site and quote the rates as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. |
| 3 | Rebate on Old Parts Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender