Tender For Special Repair To Certain Bldg No 183 At Zangli And Bldg No T-35 , T-126 At Trehgam Under The Aor Of Ge 874 Ews.
Tender Value
44.02 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
13 days left
EMD
88100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Certain Bldg No 183 At Zangli And Bldg No T-35 , T-126 At Trehgam Under The Aor Of Ge 874 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, of any description including necessary scaffolding etc complete all as specified and directed. |
| 2 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 3 | M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth with water proofing compound (without using extra lime or cement) including necessary scaffolding complete all as specified and directed. |
| 4 | Supply only Integral water proofing compound complete all as specified and directed. |
| 5 | M&L for 5mm thick rendering in cement mortar 1:3 on fair faces of concrete surface with finished surface even and smooth in ceiling/ RCC water tank & sunshade, chajjas etc complete all as specified and directed. |
| 6 | Material & Labour for Preparing new plastered/ un plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including necessary scaffolding complete all as specified and directed. |
| 7 | M&L for preparing new plastered or un plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and directed. |
| 8 | M&L for preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over chalk whiting, white or tinted complete all as specified and directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 10 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 11 | M&L Glazed ceramic coloured tiles (Designer) in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 backing coat for fixing wall tiles complete all as specified and directed. |
| 12 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 13 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 14 | M&L for brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 15 | Taking up or down15mm dia steel tubing and connections complete all as specified and directed. |
| 16 | Taking up or down20mm dia steel tubing and connections, including complete all as specified and directed. |
| 17 | M&L 15mm dia bore GI steel Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 18 | M&L 20mm dia bore GI steel Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 19 | S&F in repairs 15mm dia chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 20 | S&F in repairs 15mm dia Brass CP Basin mixer for mixing hot & cold water screwed down for iron pipe and fixed M&L complete all as specified and directed. |
| 21 | S&F in repairs 15mm dia chromium plated fancy type concealed Stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 22 | S&F in repair stainless steel Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 23 | S&F in repair 10 litres, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 24 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 25 | S&F in repairs Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union 125mm size complete all as specified and directed. |
| 26 | S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 27 | Treatment of sunken floor slab comprises of the following specifications and all as specified :- (i) M&L for Demolition/cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick average PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout. |
| 28 | (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg beg of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out (fixing of nozzle and grouting & WPC will be measured and paid separately) (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy putty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L for applying two coats of polymer modified Cementous water proof coating as per manufactures instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (vi) GI pipe 50mm dia medium grade 50cm long laid on each sunken floor as spout complete all as specified and directed. |
| 29 | (vii) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg beg of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (WPC shall be measured and paid separately) (viii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 type C-1 all round after painting with anticorrosive paint. (ix) after above process, sunken portion shall be filled with PCC 1:5:10 completely and 40 mm thick PCC 1:3:6 shall be provided at the top surface. Note :- (i) Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is included in the rates quoted above. (ii) All debris obtained from site will be thrown away out side MD land by contractor at his own expense. (iii) For payment purpose the plan area of sunken floor shall be taken into accounts. |
| 30 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. Note:-Measured overall as fixed along the centre line over fittings and accessories. |
| 31 | S&F PVC (SWR) pipes110mm Dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 32 | S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 33 | S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 34 | S&F bevelled edge mirror 600x450 of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 35 | S&F PVC (SWR) bend 110mm dia Any radius complete all as specified and directed. |
| 36 | Dismantling old unserviceable PVC water tanks exc 500 & n exc 1000 ltrs complete all as specified and directed. |
| 37 | Supply & fixing 1000 liter capacity ISI marked double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including making inlet/outlet connection complete all as specified and directed. |
| 38 | S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed. |
| 39 | S & F in repair gun-metal, globe or gate valves of 20mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed. |
| 40 | S & F in repair gun-metal, globe or gate valves of 15mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed. |
| 41 | S&F PVC (SWR) 75mm outlet dia floor trap/Nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 42 | Taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed. |
| 43 | Taking down Shutters but exc 1 sq. m and n exc 2 sqm complete all as specified and directed. |
| 44 | Taking down chowkats or frame with shutter, of doors and window, without taking off shutter from the frames area not exc 1.5 sqm complete all as specified and directed. |
| 45 | Taking down chowkats or frame with shutter, of doors and window, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each complete all as specified and directed. |
| 46 | Taking down and refixing of Shutters of any description in the same opening exc 1 sq. m and n exc 2 sq. m in each after cutting and repair complete all as specified and directed. |
| 47 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 48 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 49 | S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 50 | S&F 75mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 51 | S&F Aluminium handles 100mm long, cast type, anodised complete all as specified and directed. |
| 52 | S&F Aluminium anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed. |
| 53 | M&L for 2nd class soft wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 54 | M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 55 | M&L for providing, cement concrete type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 56 | S&F 2nd class Soft wood 35mm thick Plain, framed door panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 57 | S&F 35mm thick glazed and Skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20 (a) in 2nd class soft wood. complete all as specified and directed. |
| 58 | S&F 30mm thick glazed and Skelton shutters for window & ventilator open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.24 (b) in 2nd class soft wood complete all as specified and directed. |
| 59 | S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 60 | S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples fixed in repair. complete all as specified and directed. |
| 61 | S&F Sheet glass, 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 62 | M&L two coats of synthetic enamel on wood (ordinary tint) over one coat of pink primer over 10cm width or girth including preparation of new surface complete all as specified and directed. |
| 63 | S&F Aluminium handles 150mm long, cast type, anodised complete all as specified and directed. |
| 64 | S&F Aluminium anodised, barrel tower bolts 200mm of extruded section and fixed complete all as specified and directed. |
| 65 | S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250 mm size complete all as specified and directed. |
| 66 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets M&L for |
| 67 | M&L second class soft-wood in scantlings wrought complete all as specified and directed. |
| 68 | M&L 9mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work in ceiling complete all as specified and directed. |
| 69 | M&L 2nd class soft wood plain fillets. exc 3 n exc 6 Sqcm square, rectangular or triangular in section, clean sawn, secured with screw complete all as specified and directed. |
| 70 | Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 3 mm thick sheet glass in squares not exc 0,5 sqm in each pane fixed with wooden beads or putty (in metal frames etc), complete all as specified and directed. |
| 71 | S&F in repair vitreous China squatting pan \\"ORISSA\\" pattern size 580mmx440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap including cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified. |
| 72 | Demolition of Reinforced in suspended slabs, beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 73 | M&L RCC 1:2:4, type B-1 using 20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 74 | M&L for precast reinforced cement concrete type B1 1:2:4 as in cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed. |
| 75 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 76 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 77 | M&L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 78 | M&L Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 79 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 80 | M&L for mild steel wok as in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 81 | M&L for preparing new surfaces of steel of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 82 | M&L for preparing old plastered or un plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and directed. |
| 83 | M&L for preparing old painted wood or wood base surface of any description over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 84 | M&L for preparing old painted steel and iron surfaces of any description over 10cm width and girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 85 | Material & Labour for Complete removal of existing treatment of walls washing down and stopping of distempered and painted surfaces by using electrical operated grinder and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including necessary scaffolding complete all as specified and directed. |
| 86 | Material & Labour for Complete removal of existing treatment of walls washing down and stopping of distempered and painted surfaces by using electrical operated grinder and applying two coat of oil bound distemper on wall surface over a coat of primer to give uniform and smooth surface complete all as specified and directed. |
| 87 | M&L for curtain rails, stainless steel, with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 88 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including Seat and cover for pedestal pan complete all as specified and directed. |
| 89 | Dismantling Stone slabs and tiles laid beaded and pointed in cement mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 90 | M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 91 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in cement mortar 1:4 backing coat for fixing complete all as specified and directed. |
| 92 | Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 93 | M&L for 75 mm thick Cement concrete Type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed. |
| 94 | M&L for providing, cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs/Padding in slope 1:40, rounded or chamfered on edges complete all as specified and directed. |
| 95 | M&L for applying roof treatment on top of roof with APP based polymeric membrane (not less than 3mm thick , weight not less than 3.5Kg per Sqm, reinforced with polyester non-woven fabric (weighting not less than 150 gm/ Sqm ) laid by torch application method with side overlap 75mm and on end 100mm as per manufacture's instructions over a coat of hot paving bitumen of grade 30/40 conforming to IS 73 @ 1.2 Kg/ Sqm over a coat of bituminous primer conforming to IS -1984 @ 0.40 Kg /Sqm and applying two coats of aluminium paint over APP membrane over and including 15mm thick plaster in cm 1:4 using liquid WPC as per manufacture instruction over RCC roof complete all as specified and directed |
| 96 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 97 | M&L Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed |
| 98 | M&L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out.in soft/Loose soil Complete all as specified and directed |
| 99 | M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.in soft/Loose soil Complete all as specified and directed |
| 100 | M&L for removing excavated material/soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed |
| 101 | M&L Cement concrete type B-2, 1:2:4 (40mm graded aggregate) in surface channels and drains complete all as specified and directed |
| 102 | M&L for concrete bed of cement concrete 1:4:8 Type D2 to 300mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete complete all as specified and directed. |
| 103 | S&F reinforced concrete pipes, class NP3, laid and jointed complete with collars Complete all as specified and directed |
| 104 | M&L for dewatering/pumping/bailing out contaminated with waste material sludge from septic tank along with inlet outlet chamber of any capacity/depth by vehicle mounted sewage suction machine and disposing same out of cantonment area in a closed container including taking off manhole cover and putting back the same after cleaning./removing the liquid waste material of septic tanks and cutting hole through slab/ wall where required for inserting pipe and making good the same with cement mortar to match with existing surface to make hygienically fit, writing the date of cleaning of septic tank with black and white paint of size 150x 200 mm and finally spraying unslaked lime (bleaching powder ) dry around and over the septic tank complete all as specified and directed. |
| 105 | M&L Soak Well excavation, in any type of soil, foundationin PCC 1:3:6, wall of honey combedmasonry with top ringof m25 concrete including intercepting chamber and screen chamber chamber made of brick masonryin CM,, RCC cover slab in M25/SFRC cover,interconnecting pipe of RCC/DWC complete filled brick bats of size 3.6m Dia X 3.0m effective depth complete all as specified and directed |
| 106 | S&F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 107 | All as per item No 95 above but fixing only |
| 108 | Dismantling timber scantlings 40 sqcm and over in section in any position framed or unframed work etc, complete all as specified and directed. |
| 109 | M & L for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and directed. |
| 110 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, framed or unframed work complete all as specified and directed. |
| 111 | M&L for mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. with Fe 410 W (Gde E-250) quality 'A' complete all as specified and directed. |
| 112 | All as per item no 109 above but erection & fixing only complete all as specified and directed. |
| 113 | S&F for 12mm thick, 2nd Class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall panelling/false ceiling, including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed. |
| 114 | S&F clean swan batten at 30 cm centre to centre exc 5 and not exc 15 cm of 2nd class soft wood complete all as specified and directed. |
| 115 | S&F Pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 116 | S&F continuous (piano) hinges mild steel, right finish or electro galvanised width of flaps 40mm (when open) complete all as specified and directed. |
| 117 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floor finished even and rough to receive the topping layer complete all as specified and directed. |
| 118 | Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 119 | M&L brickwork with old size bricks, straight or curved on plan to any radius in half brick thick walls, in cement mortar 1:6 complete all as specified and directed. |
| 120 | M&L for providing precast cement concrete type B-0 (1:2:4), (12.5 mm graded stone aggregate) louvres and jallies, 25mm thick (measured solid), including all moulding etc complete all as specified and directed. |
| 121 | M&L for 2nd class softwood wrought, 35mm x 10mm laths (fixed straight or diagonally) in two way trellis work with 50mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round and fixed complete all as specified and directed. |
| 122 | M& L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete/stone, surfaces and finished even and smooth without using extra cement mixed with WPC @ 3% by Wt. of cement (External surfaces) WPC shall be measured and paid separately) complete all as specified and directed. |
| 123 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) complete all as specified and directed. |
| 124 | M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint complete all as specified and directed. |
| 125 | M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of cement primer complete all as specified and directed. |
| 126 | M&L for natural colour 15 micron anodized aluminium sliding window three track with chowkhat and aluminium grill of approved design complete all as directed with all fixing arrangements (including providing and fixing window handles, tower bolts and provision for fixing lock) including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- |
| 127 | (a)Shutter vertical member 47.62 x 45.45 x 1.74mm weighing 0.881 Kg/RM. (b)Shutter top member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM. (c)Shutter bottom member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM.(d) Natural colour 15 micron anodized aluminium anodised frame of chowkhat of section 85.00 x 44.45 x 1.80 mm weighing 1.302 Kg/ RM, with flat iron hold fasts and necessary concrete to fix hold fasts all as directed. (e)including 5.50mm thick tinted glass fixed with aluminium beading, silicon lining and gaskets and stainless steel wire cloth complete . (f) The size of anodised aluminium round handle, fancy type shall be 100mm dia (02 Nos) and anodised aluminium tower bolt of size 100mm (02 Nos). |
| 128 | M&L for Natural colour 15 micron anodized aluminium door chowkhat with shutter of approved design complete with all fixing arrangements including providing and fixing door handles, tower bolts, mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- |
| 129 | a) Shutter vertical member 85.00 x 44.45 x 1.80mm weighing 1.302 Kg/RM. b) Shutter top member 83.5 x 44.45 x 1.70 mm weighing 1.243 Kg/RM. c) Shutter bottom member 114.30 x 44.45 x 1.29mm weighing 1.139 Kg/RM. d) Shutter lock rail 83.5x44.45x1.70mm weighing 1.243 Kg/RM. e) Anodised aluminium handle, fancy type, 350mm long and aluminium tower bolt of size 150mm.(f) 5.50mm thick tinted sheet glass fixed with aluminium beading, silicon lining and gaskets. (g) Aluminium anodised frame of door of section 101.6 x 44.45 x 1.75mm weighing 1.367 Kg/M, with flat iron hold fasts and necessary concrete in PCC M-15, type B-I using 12.5 mm graded crushed stone aggregate to fix hold fasts complete all as specified and directed. Note:- Shutter shall be fixed with heavy floor spring ISI marked and pivot, brass lock with duplicate keys. |
| 130 | S & F 300 mm long aluminium alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminium alloy complete all as specified and directed. |
| 131 | S & F precoated sheet type door spring, heavy type, 200 mm long including roller and roller plate complete all as specified and directed. |
| 132 | S & F 200mm long aluminium alloy, anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 133 | S&F Harrison rails, stainless steel, with fixing brackets, stops, rollers etc., complete all as specified and directed. |
| 134 | S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sqm in each pane complete all as specified and directed. |
| 135 | S&F in repair vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (including flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed. |
| 136 | M&L for form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed. |
| 137 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 138 | M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded aggregate as in sub base complete all as specified and directed. |
| 139 | M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 140 | M & L for point wiring One light /one fan/one bell point controlled by one switch, with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLSH, drawn through PVC casing caping/PVC conduit 20mm dia (as per site requirement) including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly including taking down old one complete all as specified and directed.. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained (Ph-Red, N-Black, Earth- Green) |
| 141 | As per Item No 136 above but point wiring for One socket outlet 5 pins 5 amps controlled by one switch on same board. |
| 142 | As per Item No 136 above but point wiring One socket outlet 5 pins 5 amps controlled by one switch on independent board. |
| 143 | As per Item No 136 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. |
| 144 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 145 | S&F socket outlet multi 5 pins 6 amp, complete all as specified and directed. |
| 146 | S & F switch socket combination 2 in 1, 6A flush type complete all as specified and directed. |
| 147 | S & F switch socket combination 3 pin 16A, flush type complete all as specified and directed. |
| 148 | S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed. |
| 149 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 150 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 151 | S & F in replacement LED light fitting 1x9W/1X10Wbulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 152 | S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. |
| 153 | Supply and fix LED Bulb 9 Watt complete all as specified and directed. |
| 154 | S&F in repairs sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche including taking down old one complete all as specified and directed. |
| 155 | S&F in repairs sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 4 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche including taking down old one complete all as specified and directed. |
| 156 | S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed. |
| 157 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series complete all as specified and directed. |
| 158 | M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLSH ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 6 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surface including taking down old unserviceable submain wiring and making good disturbed surface complete all as specified and directed. |
| 159 | S&F building security light fitting in repair LED 35 Watt for Energy saving and environmental friendly long life made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistance of IK07 including driver unit and bracket made up of GI tube of suitable size (1.2 Mtr Length) etc complete all as specified and directed. |
| 160 | M&L for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0 mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion all as specified and directed. |
| 161 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable of size 16 Sqmm complete all as specified and directed |
| 162 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender