Defence Statutory Bodies & Commissions/Committees Closing in 8 days TDR #58407839

Tender For Providing Of Certain Sanction Works At Palampur Mil Stn

Issued by Statutory Bodies & Commissions/Committees · Kangra, Himachal Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Nov 2026
8 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Providing Of Certain Sanction Works At Palampur Mil Stn

BOQ

Name of Work:- PROVN OF CERTAIN SANCTION WORKS AT PALAMPUR MIL STN
Sl. No. Item Description
1Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quorns, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed
2M&L for Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, as per design approved by GE.
3M&L for complete removal of existing treatment and preparation of old plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including a priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as specified and as directed by GE.
4M&L 15 mm thick plastering in cement mortar 1:4 on brick surfaces or concrete surface, as on external surfaces, surface finished even and smooth without using extra cement complete all as specified and directed.
5M&L for preparation of New plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including a priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as specified and as directed by GE.
6Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil completed all as specified and directed.
7Excavation in trenches, n. exc. 1.5m wide and n.exc. 1.5m deep; for foundation etc n.exc. 10 Sqm on plan and getting out in any type of soil complete all as specified and directed
8M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in fdn filling and mass concrete complete all as specified & directed.
9S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc conforming to Fe-410W, Gde E-250 Quality 'A' as specified all as directed by Engineer-in Charge.
10M&L preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed
11S & F in repairs rotational moulded polyethylene water storage tank white in colour 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line complete all as specified and directed
12S&F Steel water tubing, 20mm bore dia, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work, connecting to existing pipeline etc complete all as specified and directed.
13S&F 20mm dia gun metal ,globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
14Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
15S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 thick of an colour having tensile strength of 550 Mpa as in Valley gutter fixed to frame with self tapping screws as specified complete all as specified and directed (Colour & size to be approved by GE)
16S&F 1mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) specified complete all as specified.
17S&F for Roof trusses (framed),verandah posts, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc quality-A conforming to Fe-290, Gde E-165 including anchor fastener of required dia & length complete all as specified and as directed.
18S&F PVC (SWR) pipes 110 mm bore dia, single socketed in any length with rubber ring joints fixed to walls with purpose made clamps complete all as specified and directed.
19S & F 110 mm bore PVC Bends (SWR) complete all as specified and directed.
20M&L for cement concrete type B-1 1:2:4 (20mm graded aggregate) as in splash stone, surface channel and drain including all necessary formwork complete all as specified and directed by Engineer in Charge.
21M&L for PCC (1:3:6) type C2 by using 40mm well graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed
22M&L for precast reinforced cement concrete (RCC) pillar of size 260 mm at base & 160mm at top and 1.80 m height above the supporting RCC base, with RCC base/block of size 600 mm x 600 mm x 600 mm, including necessary formwork, moulding, casting, curing, lifting, handling and erection in position complete all as specified and directed(Tmt Bars used shall be measured and paid separately)
23M&L TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed.
24M&L TMT bars 6 to 8mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for column, hooking end and binding with incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed.
25M&L for preparation of new plastered surface of wall and applying two coats of cement base paint upto over a coat of primer complete all as specified and directed
26M&L Hardcore of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface completed all as specified & directed.
27M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.
28M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed
29M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
30S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S grade St-240 complete all as specified and directed
31S & F Rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-410-W(Gde-E-250)quality A. complete all as specified and directed
32Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete and including demolition of existing tiles and removal outside the MoD land complete all as specified and as directed.
33M&L for cement concrete type B-1 1:2:4 (20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings etc, complete all as specified and directed Please Enable Macros to View BoQ information
34M&L for cement concrete type B-1 1:2:4 (20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings etc, complete all as specified and directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58407839
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Providing Of Certain Sanction Works At Palampur Mil Stn
Basic Detail
Tender No GEP-100/2026-27
Bidding Type Tender
Location
City Kangra
State Himachal Pradesh
Key Dates
Publish Date 05 Nov 2026
Submission Date 26 Nov 2026
Open Date 03 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 70000
Exemption Not Available
Document List
1483b7ce-5cd0-41aa-a062-c2eec1434fef.html
BOQ_894499.xls
td.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
html

1483b7ce-5cd0-41aa-a062-c2eec1434fef.html

xls

BOQ_894499.xls

pdf

td.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender