Defence Statutory Bodies & Commissions/Committees Closing in 3 days TDR #58407837

Tender For Special Repair To Bldg No T-116 Of 27 Mtn Div Sig Regt At Kalimpong Mil Stn Under Ge 867 Ews.

Issued by Statutory Bodies & Commissions/Committees · kalimpong, West Bengal
Tender Value
37.77 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
3 days left
EMD
75540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Bldg No T-116 Of 27 Mtn Div Sig Regt At Kalimpong Mil Stn Under Ge 867 Ews.

BOQ

Name of Work:- SPECIAL REPAIR TO BLDG NO T-116 OF 27 MTN DIV SIG REGT AT KALIMPONG MIL STN UNDER GE 867 EWS.
Sl. No. Item Description
1Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or salimar pattern roof coverings, etc. complete all as specified and as directed.
2Supply & Installation of Pre-painted High Tensile 550 Mpa yield strength, Bare Galvalume Steel Sheet having maximum pitch of 250mm c/c & minimum 30mm crest depth in length as per site requirement. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal and as per manufacturers specifications, etc. complete all as specified and as directed by Engr-in-Charge.
3Supply & Installation of Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume plain Steel Sheet. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal and as per manufacturers specifications as in ridge/facia boarding, etc. complete all as specified and as directed by Engr-in-Charge.
4Dismantling wrought iron or mild steel work of any description, etc. complete all as specified and as directed.
5S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 -W (Gde-E- 250) quality-A, etc. complete all as specified and as directed.
6S&F joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410 -W (Gde-E- 250) quality-A, etc. complete all as specified and as directed.
7Dismantling of wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets of any thickness including cover fillet, etc. complete all as specified and as directed.
8S&F 4mm thick Veneered decorative plywood of grade 1 (with BWR resin) with decorative face veneers on one face fixed with screws/nails to timber frame work, etc. complete all as specified and as directed.
9S&F 605x605mm size of grid with Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, etc. complete all as specified and as directed.
10S&F 2 mm dia GI Hangers (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia and 40mm long, etc. complete all as specified and as directed.
11S&F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably for fix/placed as in false ceiling grid made of Aluminium /G.I./ M.S. as per specification and drawing, etc. complete all as specified and as directed.
12Dismantling of boarding of any description fixed in any position with nails/screws, etc. complete all as specified and as directed.
13M&L for second class hard wood Weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed, etc. complete all as specified and as directed.
14Description all as per item No 13.00 here-in-before but fixing only, etc. complete all as specified and as directed.
15M&L for preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, etc. complete all as specified and as directed.
16M&L for Preparing new surfaces of wood and wood based materials, steel and iron work of any description and girth, not otherwise described, and treated with tar or coal tar black paint, etc. complete all as specified and as directed.
17M&L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, etc. complete all as specified and as directed.
18Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing near cement slurry @3 Kg per sqm, etc. complete all as specified and as directed.
19M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar 1:6, etc. complete all as specified and as directed.
20M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in vertical surface such as skirtings, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick backcoat in cement mortar 1:4 including takingdown cement plaster, etc. complete all as specified and as directed.
21Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc. complete all as specified and as directed.
22M&L for 30cm x 30cm x 25mm thick coloured & polished Chequered cement concrete tiles set, jointed and pointed in neat cement slurry as in floors with grey pigment cement and pigments includig over 20mm thick screed bed in CM (1:6), etc. complete all as specified and as directed.
23Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thickness (below or above ground level) , etc. complete all as specified and as directed.
24M&L for 75 mm thick PCC type C-2 (1:3:6) (using 40mm graded stone aggregate) as in plinth protection/ path laid slope of 1 in 12 and finshing cement concrete surface even and smooth without using extra cement with and including all necessary form work , finishing exposed edges fair or rounding or chamfering of exposed edges, etc. complete all as specified and as directed.
25M&L for 50mm thick PCC type B-1 (1:2:4) (using 20mm graded stone aggregate) as in floors for subbase, etc. complete all as specified and as directed.
26Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
27M&L for 15 mm thick rendering ( in two coats 10mm+5mm) on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement in 2nd coat or in the manner specified by the manufacturer and in the proportions indicated, etc. complete all as specified and as directed.Note:-WPC will be measured and paid separately as supply only.
28M&L for 10 mm thick rendering in cement mortar 1:6 on other than fair faces of stone masonry brick work and rendering finished even and fair without using extra cement, etc. complete all as specified and as directed.
29Supply only integral water proofing compond, etc. complete all as specified and as directed.
30M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer, etc. complete all as specified and as directed.
31M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, etc. complete all as specified and as directed.
32M&L for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, etc. complete all as specified and as directed.
33M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide, etc. complete all as specified and as directed.
34M&L for preparation of old plastered surfaces of wall and applying two coats of oil bound distemper, etc. complete all as specified and as directed.
35Dismantling of timber fillets, rails, posts raftersn fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section from framed work, etc. complete all as specified and as directed.
36M&L for 2nd class hard wood Plain fillets of sectional area exc. 13 sqcm and n.exc. 25 sqcm in square/rectangular or triangular in section of clean sawn and fixed/secured with nails or brads, etc. complete all as specified and as directed.
37Dismantling timber scantlings 40 Sqcm and over in section in any position of framed work, etc. complete all as specified and as directed.
38M&L for second class soft wood in wrought scantling timber fixed to frame work, etc. complete all as specified and as directed.
39Taking down chowkhats or frame n.exc 1.50 sqm each with shutter without taking off shutters from the frame, etc. complete all as specified and as directed.
40Taking down chowkhats or frame exc 1.5 sqm but n.exc 4 sqm each with shutter without taking off shutters from the frame, etc. complete all as specified and as directed.
41Taking down shutters of any description n.exc 1 Sqm each, etc. complete all as specified and as directed.
42S&F 2nd class hard wood plain, solid straight chowkats and frames of wrought framed rebated on the solid rounded or chamfered put together with glue, pinned at joints, etc. complete all as specified and as directed.
43S&F 35 mm thick second class hard wood, plain, framed panelled shutters of any number of panels, with panels of 12 mm thick timber flat on both sides feather edged, or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers and the dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I, etc. complete all as specified and as directed.
44S&F 25mm thick second class hard wood for Glazed and skeleton shutters open rebated and prepared to receive glass, gauze, wiremesh etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, wire mesh, etc. and the sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), etc. complete all as specified and as directed.
45S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples, etc. complete all as specified and as directed.
46Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, etc. complete all as specified and as directed.
47S&F 4 mm thick Sheet glass of ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane, etc. complete all as specified and as directed.
48S&F 100 mm size butt hinges of medium weight mild steel cold rolled fixed with screws, etc. complete all as specified and as directed.
49S&F 100 mm long aluminium anodised barrel tower bolt of extruded section and fixed with screws, etc. complete all as specified and as directed.
50S&F 125 mm size Aluminium handles of cast type anodised and fixed with screws, etc. complete all as specified and as directed.
51S&F mild steel framed work such as grills, grating etc with end of bars shouldered and riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-290, Gde E-165, etc. complete all as specified and as directed.
52S&F 150 mm size Aluminium handles of cast type anodised and fixed with screws, etc. complete all as specified and as directed.
53S&F 300 mm long aluminium alloy,anodised sliding door bolts with haps staple bolt type, and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed with nut & bolts, etc. complete all as specified and as directed.
54Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition, etc. complete all as specified and as directed.
55M&L for RCC Type B-0 (1:2:4) (using 12.5mm graded stone aggregate) nominal mix as in Columns, pillars, piers, posts and struts, etc. complete all as specified and as directed.
56M&L for 10mm dia and over TMT bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia or securing with clips, etc. complete all as specified and as directed.
57M&L for 6 to 8mm dia and over TMT bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia or securing with clips, etc. complete all as specified and as directed.
58M&L for formwork to sides of pillars, posts, struts, piers, columnsand stanchions with fair finished surfaces of square/rectangular or polygonal, etc. complete all as specified and as directed.
59S&F 25mm dia decorative type curtain rod (curtain rails) of stainless steel (SS-304 grade) including suitable selective choice decorative knobs and brackets fixed with wall flange and screws including takingdown existing curtain rods, etc. complete all as specified and as directed by Engr-in-Charge.
60M&L for mild steel plates, wind ties for roof including securing bolts and work confiring to Fe-290 Gde E-165, etc. complete all as specified and as directed.
61Taking down carefully unserviceable copper/aluminium point wiring of any description (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of wall, floor etc. to match with existing finishes, etc. complete all as specified and as directed.
62M&L for point wiring with 1.5 Sqmm PVC insulated and un-sheathed single core FRLSH copper cable of 1100 volts grade, multi-stranded conductor, drawn through and including PVC casing and capping not less than 20 mm size (medium grade) fixed on surface with all necessary accessories, along with continuous 1.5 Sq.mm PVC insulated FRLSH copper earth wire connected to common earth dolly, including providing and fixing of modular type PVC surface box of suitable size complete with modular frame (grid) and cover plate, making good disturbed surfaces, complete for light/fan/call bell point controlled by one switch, etc. complete all as specified and as directed.
63Description all as per item No 62.00 here-in-before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent boad, etc. complete all as specified and as directed.
64Description all as per item No 62.00 here-in-before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable, etc. complete all as specified and as directed.
65S&F Modular switch of 1 way 6A, 1 module 230 Volts,50Hz, ISI marked, etc. complete all as specified and as directed.
66S&F Socket of 6A-2/3 pin combined 2 module 230 Volts, 50Hz, ISI marked, etc. complete all as specified and as directed.
67S&F Socket of 6A/16A-2/3 pin combined, 2 module 230 Volts, 50Hz, ISI marked, etc. complete all as specified and as directed.
68S&F Modular switch of 1 way 16A, 1 module 230 Volts, 50Hz, ISI marked, etc. complete all as specified and as directed.
69S&F 65X50 mm Ceiling rose of surface bakelite three terminal, etc. complete all as specified and as directed.
70S&F 20 Watt LED batten surface / wall mounted with extruded aluminium box type housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) with operating range of 150-270 V AC, etc. complete all as specified and as directed.
71S&F 35 Watt LED building security light fitting 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including G.I pipe bracket, bracket mounting clamp with nut & bolts, etc. complete all as specified and as directed.
72S&F 36 Watt recessed type LED Panel Light of size 600 mm × 600 mm suitable for operation on 140–270 V AC supply, complete with powder coated die-cast aluminium housing, high quality glare free diffuser, independent electronic driver duly wired up to terminal block and all fixing accessories. The fitting shall have minimum system efficacy ≥100 lm/W, PF ≥0.90, CRI ≥80, THD ≤10%, IP20 protection, 6500K CCT, beam angle 120°, flicker ≤5%, instant start, inbuilt surge protection ≥3 kV and minimum life ≥35,000 burning hours, complete with internal connections, testing and commissioning in all respects, etc. complete all as specified and as directed.
73M&L for sub main wiring along with earth wire of size two run of 6 sqmm + one run of 6 Sqmm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm rigid non-metalic PVC casing caping on surface of wall/roof including takingdown existing wiring, etc. complete all as specified and as directed.Note : Three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length
74S&F TPN DB with suitable for TPN MCB incomer of double door (IP-43), 4 way, built- in 100 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz, flushed in wall or fixed on surface, etc. complete all as specified and as directed.
75S&F 415V, 10KA 'C' curve Miniature Circuit Breaker (MCB) of TPN 4P, 40 To 63 Amps. capacity in the TPN DB complete with connection testing and commissioning, etc. complete all as specified and as directed by Engr-in-Charge.
76Dismantling/Taking down unserviceable DBs/metal clad socket etc. of any type/size including MCBs and making good disturbed surfaces to match with the existing finishes, etc. complete all as specified and as directed by Engr-in-Charge.
77S&F Sheet metal enclouser of Double door (IP-43) SPN DB Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral linkof 8 way 240 Volts AC flushed in wall or fixed on surface, etc. complete all as specified and as directed.
78S&F 240V, 10KA 'C' curve Miniature Circuit Breaker (MCB) of DP 32 Amp rating in the MCB DB including connection, testing and commissioning, etc. complete all as specified and as directed by Engr-in-Charge.
79S&F 6 To 32 Amp rating 240V, 10KA 'C' curve Miniature Circuit Breaker (MCB) of SP current carrying capacity in the MCB DB complete with connection, testing and commissioning, etc. complete all as specified and as directed.
80M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC type C-1 (1:3:6) (using 20mm graded stone aggregate), 50 mm thick pre-cast RCC type B-1 (1:2:4) (using 20 mm graded stone aggregtage) for cover slab and reinforced with 8 mm dia TMT bars of 15 cm C/C and suitable handle of 10 mm dia round bar , GI medium grade pipe for earth lead protection with necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and including necessary excavation earth work in soft/loose soil and disposal of surplus soil to a distance n.exc. 50m and dismantling of existing earthing, etc. complete all as specified and as directed.
81Ttaking out old unserviceable UG cable of any size/ type from trenches/ wall/ roof etc. for necessary repair/ replacement/ re-laying works, etc. complete all as specified and as directed by Engr-in-Charge.Note :Excavation and earth work should be measured and paid separately.
82M&L for XLPE cable insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core, including glands, lugs, nut, bolts, washers as required at site, testing, etc. complete all as specified and as directed.
83Excavation in trenches/ foundation in soft/ loose soil n.exc. 1.5 metre wide and n.exc. 1.50m deep for LT under ground cable/pole foundation and getting out including forming bottom surface to required level or slope, etc. complete all as specified and as directed.
84Returning, filling , including spreading , leveling , watering and well ramming in layer n.exc 25cm each layer, etc. complete all as specified and as directed.
85Removing excavated material n.exc 50m and depositing where directed at a level n.excg 1.5m above the starting point, etc. complete all as specified and as directed.
86Supply and laying of Sand cushioning to underground cables provided with a layer of consolidated thickness of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches, etc. complete all as specified and as directed.
87M&L for Sub class ‘B’ bricks for covering to cable laid dry flat, with width equal to the length of brick including taking down existing bricks, etc. complete all as specified and as directed.
88S&F 40 mm dia Steel pipe glavanized light grade laid in trenches or under ground/floor or road or fixed with pole for protection of cable/ Earth strip including clams with nut, bolts and wasers including taking down existing pipes, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information
89S&F 40 mm dia Steel pipe glavanized light grade laid in trenches or under ground/floor or road or fixed with pole for protection of cable/ Earth strip including clams with nut, bolts and wasers including taking down existing pipes, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58407837
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 37.77 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Bldg No T-116 Of 27 Mtn Div Sig Regt At Kalimpong Mil Stn Under Ge 867 Ews.
Basic Detail
Tender No 8613/E8
Bidding Type Tender
Location
City kalimpong
State West Bengal
Key Dates
Publish Date 05 Nov 2026
Submission Date 26 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 37.77 Lakhs
Tender Fee 500
EMD 75540
Exemption Available
Document List
14d59f9b-cc22-4cbd-a34b-c5c066f081ca.html
BOQ_894627.xls
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

14d59f9b-cc22-4cbd-a34b-c5c066f081ca.html

xls

BOQ_894627.xls

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender