Defence Statutory Bodies & Commissions/Committees Closing in 8 days TDR #58407783

Tender For Providing Of Certain Sanction Works At Palampur Mil Stn Under Ge Palampur

Issued by Statutory Bodies & Commissions/Committees · Kangra, Himachal Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Nov 2026
8 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Providing Of Certain Sanction Works At Palampur Mil Stn Under Ge Palampur

BOQ

Name of Work:- PROVN OF CERTAIN SANCTION WORKS AT PALAMPUR MIL STN UNDER GE PALAMPUR
Sl. No. Item Description
1Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep getting out in any type of soil, complete all as specified and directed.
2Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out, complete all as specified and directed.
3M&L for PCC 1:3:6 type C1 using 40mm graded crushed stone aggregate as in fdn filling and mass concrete complete all as specified and directed.
4M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6, complete all as specified and directed.
5Damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4, type B-0 50mm thick complete all as specified and directed.
6Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as spfd and directed.
7S&F Solid PVC door frame of size 50x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S&F in opening as per specification & drawing shown in SSR Part-II, complete all as spfd and directed.
8S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to in stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in frames at site as per specification and drawing shown in SSR Part-II, complete all as specified and directed.
9M&L 15 mm thick plastering in cement mortar 1:4 on brick surfaces or concrete surface, as on internal surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.
10M&L 15 mm thick plastering in cement mortar 1:6 on brick surfaces or concrete surface, as on internal surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.
11M&L for Glazed ceramic tiles coloured in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or Loulour cement to match 7mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.
12M&L for Non skid/ joint free (edge cut) coloured/ digital ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile 300 x 300 mm / 400 x 400 mm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.
13S&F Steel ventilator with top hung shutter incl hinges, steel peg stay, complete with glazing bars dove tailed or welded, complete all as specified and directed.
14S&F 4.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes.complete all as specified and directed.
15S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (including dismantling) complete all as specified and directed.
16S&F vitreous china wash down water closet pan (Pedestal pattern) one piece with flushing cistern white with 'S' trap connected to drain or out going pipe and flushing pipe complete as in repair including PVC sheet cover closed recessed type with flat bottom , and cover with mild steel chromuim plated or aluminium hinging device complete all as specified and directed.
17S&F 10 Ltr capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as specified and directed.
18S&F PVC Connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.
19S&F Vitreous china, wash hand basin with pedestal (white) of size 550mmx400mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper, PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends (fixed in repair), complete all as specified and directed.
20Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brassscrews, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
21S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms
22S&F Tubular towel rail, 20mm dia, 60 cm long, CP with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs ,complete all as spfd and directed.
23S&F in soap dish type of mild steel Chromium plated and wooden/plastic cleats , complete all as specified and as directed.
24S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and with chromium plated bracket guard and railing 60cm long as approved by GE.
25S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed.
26S&F CP bib taps 15mm bore cast copper alloy fancy type with crutch or butterfly, handle, screwed down, screwed for iron pipe. complete all as specified and directed.
27S&F CP Pillar taps 15 mm bore cast alloy with capasten head screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly-nutsscrewed for iron pipe and fixed
28S&F CP 15 mm bore stop valve/angle cock cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed.complete all as specified and directed.
29S&F 20 mm Gun metal Gate valves fitted for iron pipe complete all as specified.
30S&F GI water tubes 15mm dia medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and as directed
31S&F GI water tubes 20mm dia medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and as directed
32S & F in health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
33S&F PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete as specified and directed
34S&F PVC waste pipe for WHB/Urinal complete as specified and directed
35S&F as in repair CP spray hygienic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed
36S&F Aluminium butt hinges, 100mm long, B-21 A complete all as specified and directed.
37S&F Aluminium anodised barrel tower bolt of extruded section, 200mm long complete all as specified and directed.
38S&F Mild Steel sliding door bolts, 200 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete.
39S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed.
40M&L TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed.
41M&L TMT bars bars 6 to 8mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for column, hooking end and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed
42M&L for RCC Nominal mix (1:2:4)using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
43M&L Preparing new surface of steel of any description, over 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.
44M&L hardcore of gauge n exc 63 mm,deposited, spread and levelled in layers, watered and rammed to a true surface. complete all as specified and directed.
45M&L 75 mm Thick PCC 1:4:8 Type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.
46M&L 75mm thick, PCC (1:3:6), type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection/ foot path finished even and smooth without using extra cement, complete all as specified and directed.
47M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, similar work, vertical or to batter complete all as specified and directed.
48M&L for Peparation of new plastered or unplastered surfaces of walls and applying two coats of Oil bound distemper, white or tinted, complete all as specified and directed.
49M&L for Peparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, complete all as specified and directed.
50Returning filling in (soil) incl spreading, levelling, watering and well ramming in layers n exc 25cm thick, complete all as specified and directed.
51Removing of surplus soil to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point, complete all as specified and directed.
52Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
53S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S grade St.-240 complete all as specified and directed.
54S & F Rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-410-W(Gde-E-250)quality A, complete all as specified and directed.
55S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases,splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc. complete all as specified and directed.
56S&F PVC (SWR) pipes 75 mm bore dia, single socketed, in any length with rubber ring joints fixed to walls/ laid in trenches etc including taking down and removal from site, complete all as specified and directed.
57S&F PVC (SWR) pipes 110 mm bore dia, single socketed in any length with rubber ring joints fixed to walls/ laid in trenches etc including taking down and removal from site, complete all as specified and directed.
58S & F 75 mm bore PVC (SWR) Bends (SWR)
59S & F 75 mm bore PVC (SWR) T- Junction with ovel acces door
60S & F 75 mm bore PVC (SWR) Bend with ovel acces door
61S & F 110 mm bore PVC Bends (SWR)
62S & F 110 mm bore PVC (SWR) T- Junction with ovel acces door
63S&F PVC (SWR) vent cowl 75 mm dia
64M & L Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified
65M&L for brick work with sub class 'B' brick in built in CM 1:4, straight or curved on plan exc 6m mean radius
66Providing precast cement concrete type B-1, 1:2:4 (using 20mm graded stone agg) as in landing , cover slab for manholes set in CM 1.6 complete all as specified and directed.
67Providing, cement concrete 1:2:4 in lintels upto 1.5m clear span, cills, steps; seismic and similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed.
68M&L 100mm thick Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface completed all as specified & directed.
69M&L for 75 mm thick PCC 1:3:6, type C-2 (Using 40 mm graded crushed stone aggregate) as in sub base etc and finished even without using extra cement, complete all as specified and directed.
70M&L for laying Chequered cement concrete tiles 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floorswith grey cement and no pigment over 20mm screed bed in CM 1:6 complete all as specified and directed.
71M & L for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like etc complete all as specified and directed.
72PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate), as in foundation filling and mass concrete, complete all as specified and directed.
73M&L for Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams flat for fair finished surfaces of concrete , complete all as specified and directed.
74RCC M-25 design mix (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span all as spcified .
75M & L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups cut to length bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with and incl mild steel wiere (annealed) not less than 0.9 mm dia or securing with clips.
76Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.
77M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:4 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed.Note :- Water proofing liquid compound shall be measured and paid separately.
78Supply only liquid water proofing liquid
79M&L for two coat of oil bound distemper over priming surface with chalk whitening on plastered ,prepatory to distempring to new plastered surfaces including preparation of wall surfaces complete all as specified and directed.
80Preperation of new surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.
81M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified.
82Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc confirming to Fe 290 ( gde E-165) all as specified.
83Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, confirming to Fe 290 ( gde E-165) all as specified.
84Mild steel bolts.purpose made dia n exc 12 mm. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30 cm long
85M & L for hard core broken stone of gauge n.exc 63 mm deposited , spread and levelled in layers n.exc 15 cm thick, watered rammed to a true surface complete all as specified and directed.
86M&L for 25 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in floor finished even and rought to received the topping layer complete all as specified and directed.
87M & L for providing 75mm thick PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in plinth protection including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.
88M&L Non skid ceramic white tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
89S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints , fixed to walls complete all as specified and directed.
90S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints laid in trenches, complete all as specified and directed.
91S & F110 mm PVC SWR vent cowl ,complete all as specified.
92S&F, 75 mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints laid in trenches, complete all as specified and directed.
93S&F factory made solid PVC moulded door shutter with wood free EPS 28 to30mm thick(stiles) with 2 4 or 6 panels design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face supplying and fixing in frame at site asper specifications and drawings as per SSR Pt-II 2010
94S&F butt hinges 100mm, cold rolled medium weight mild steel complete all as specified and directed.
95S&F 125mm size, extruded aluminium alloy handles, fabricated type, anodised.
96S&F 150mm long aluminium tower bolts (ISI Marked) extruded typecomplete all as specified and directed.
97S&F 300 mm size brass sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.
98S&F Powder coated Anodised aluminium window and ventilator shutters ( power coating of any colour and thickness not less than 50 micron) side hung type without sash bars, aluminium section weighting 0.55kg/m incliding necessary joining cleats, glazing clips, rubber meoprane packing one number of alumium handle of suitable size for each shutter, one peg stays 150mm long, 02 numbers hinges type B-21,100mm long,anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed.
99M&L for RCC Nominal mix 1:2:4 type B1(using 20 mm graded aggregate) in chajjas complete all as specified and directed.
100Formwork to flat chullah hoods,chajjas,troughs and similar items including edges fair finished surfaces,complete all as specified and directed.
101S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed
102S&F vitreous china wash down water closet pan (Orissa pattern) white with integral foot rest of of size 580x440mm white (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' and 'S' trap complete incl making good to floor complete all as specified and directed.
103Supply of PVC 10 Ltr valvless,syphonic action type , flushing cistern, low level,white inlet, ball valve, float and handle including bracket and & supply of flush pipe of polyethylene of low or high density or PVC , 32 mm dia for low level cistern & supply of plastic water closet seat cover white , closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device.
104S&F, Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand of size 630x450 mm ,including brackets and waste pipe complete all as specified and directed.
105S&F CP jet spray hygenic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed
106S&F vitreous china Urinal half stall type white with spreader etc, complete including making good. complete all as specified and directed.
107S&F 15mm bore Angle valves, CP fancy type (ISI marked) one way/ two way screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) complete all as specified and directed.
108PVC connections 15mm size with PTMT nuts of length 450mm
109S&F Chromium plated toilet paper holder standared quality complete all as specified and directed by Engineer-in-Charge. (Make : Jaquar/Kohler/ Cera)/Equivalant
110S&F brass cromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and directed.
111S&F Rotational moulded polyethylene water storage tank 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line , Complete all as specified and directed.
112Excavation over areas n exc1.5 m deep in soft soil and getting out as specified and directed
113Excavation over areas exceeding 1.5 m and n exc 3.0 deep in soft soil and getting out as specified and directed
114M & L Broken bricks as loose filling with aggregates of guage 80 to 150mm in soakage pits, soakage wells etc.,complete all as specified and directed.
115M&L Rendering 20mm thick in CM 1:4 on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.
116M&L for RCC type B1, 1:2:4 (using 20mm graded stone aggregate) as in cover slabs complete all as specified and directed.
117M&L for cast iron pipe of dia 100mm in any length with cement jointed fixed to wall.complete all as specified and directed.
118M&L for cast iron cap cowl 100mm dia.complete all as specified and directed.
119S&F 25 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
120S&F 40 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
121S&F tube medium grade galvanished with all fitting laid in trenches of 25 mm dia complete all as specified and directed.
122S&F tube medium grade galvanished with all fitting laid in trenches of 40 mm dia complete all as specified and directed.
12350mm thick, plain cement concrete, 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in sub base of floor / path surfaces finished even & rough to receive floor finishes, complete all as specified and directed.
124M&L construction of valve pit of inner sizes up to 60 cmx 60cm x 60cm brick masonry construction complete All internal surface and external surface upto 15 cm below normal ground level of brick masonry shall be plastered 15mm thick in cement mortar 1:4, finish even and smooth including necessary excavation and earth work in any type of soil,metal sheet cover with proper angle iron frame and PCC work complete all as specified and directed.
125M&L 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate laid in alternative bays area not exc 2 sqm each as in plinth protection laid to slope of 1 in 12 including finishing the surface even and smooth with using extra cement including Demolition of cement concrete unreinforced. complete all as specified and directed.
126M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members n.exc. 4 kg/Sqm complete all as specified and directed.
127S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete forming holes, without any attachment (Fe-410-W(Gde-E-250)quality A. complete all as specified and directed.
128M&L preparation of new plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.
129Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory compacted bed of coarse sand, compacting & pattern over and including 50mm thick method using PU mould, laid in required colour & pattern over and including laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete and including demolition of existing tiles and removal outside the MoD land complete all as specified and as directed.
130Preparing of newly plastered surface of wall and applying two coat oil bound distemper over a coat of primer over and incl 2mm thick wil care putty, complete all as specified and directed.
131S&F 15 mm Gun metal Gate valves fitted for iron pipe complete all as specified and directed.
132S&F 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.
133S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
134S&F Brass chromium plated Sink mixture for mixing hot and cold water for sink, screwed down for iron pipe for 15mm dia bore pipe,, complete all as specified and directed.
135M&L vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layer in CM 1:4, Incl dismantling complete all as specified and directed.
136M & L for providing, cement concrete nominal mix(1:2:4) type B-1 (20mm graded aggregate) including formwork etc complete all as specified and as directed.
137M & L for providing, precast reinforced cement concrete (1:2:4) type B-1 (20mm graded aggregate) set in CM (1:4) in landing, cover slab (for manhole etc) chullah hoods, chajjia, water trough, mangers, shelves and similar articles with plane face including formwork etc complete all as specified and as directed.
138M & L for Glazed coloured ceramic tiles External/Internal in vertical surface 300mmx450mmx7mm/300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed.
139M & L for Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and directed.
140M & L for Machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick over & including 10mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish including dismantling and removing the debris outside the defence land complete all as specified and as directed.
141Cutting chase, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chasesfor concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls all as directed.
142S&F LED post top lantern with dome, holder and 20 watt lamp including GI pipe of size 40 mm dia as required length at site for fixing Post top lantern complete all as specified and directed.
143Supply and fixing DB 2 Way alongwith MCB 6A including clamp nut bolt for fixing complete all as specified and directed
144S & F PVC conduit 20 mm dia including 1.5 Sqmm copper wire for pahse and neutral complete all as specified and directed (Note : One run of PVC conduit and one run of 02 copper wire will be measured as one RM)
145M & L plain cement concrete,M-15(nominal mix) 1:2:4 using 40mm graded crushed stone aggregate as in foundation,filling and mass concrete complete all as specified and directed.
146Supply, installation 28 mm OD X 0.9 MM thick testing and commissioning of Copper pipe as per BS 2871
147Supply, installation 22 mm OD X 0.9 MM thick testing and commissioning of Copper pipe as per BS 2871
148Supply, installation 15 mm OD X 0.9 MM thick testing and commissioning of Copper pipe as per BS 2871
149Supply, installation 12 mm OD X 0.9 MM thick testing and commissioning of Copper pipe as per BS 2871
150Supply Oxygen port, installation, testing and commissioning medical of Gas outlet points terminal unit with matching probes for Oxygen, Nitrous Oxide Medical air 4bar /7 bar , CO2 front loading type BS type
151Supply Vaccum port, installation, testing and commissioning medical of Gas outlet points terminal unit with matching probes for Oxygen, Nitrous Oxide Medical air 4bar /7 bar , CO2 front loading type BS type
152Supply and fixing 25 mm ball valve of Zone valve boxes with line isolation valves , pressure gauges etc
153Supply and fixing 22 mm ball valve of Zone valve boxes with line isolation valves , pressure gauges etc
154Supply and fixing 15 mm ball valve of Zone valve boxes with line isolation valves , pressure gauges etc
155Supply and fixing 12 mm ball valve of Zone valve boxes with line isolation valves , pressure gauges etc
156Supply and fixing of Oxygen flow meter with Humidifier bottle including testing and commissioning complete as specified and directed
157Supply & Fixing of Ward Vaccum unit with 600ml suction jar including testing and commissioning complete as specified and directed
158Supply and fixing of Colour coded antistatic HP tubing for Oxygen Make- Indigenous
159Supply and fixing of Colour coded antistatic HP tubing for Vaccum Make- Indigenous
160Supply, installation, commissioning and testing of Medical gas central alarms should be capable of monitoring a maximum of 2 medical gas services (Oxygen , Vaccum) by means of pressure sensors which detect deviations from the normal operating limits of either pressure or medical vaccum . The area alarm should have a digital display of pressure. The medical gas area alarm should fully satisfy the international standard . Each gas service should be displayed by coloured LED to show Normal (green ) low and high pressure (red) condition medical vacuum systems should be displayed in the normal (green) and low vaccuum (red) condition only . Failure indication should be displayed by flashing lights and normal indication should be steady. The alarm panel should incorporate a volt free normally closed relay to allow for interconnection to either a medical gas central alarm system and event recording circuit of a building management system. The alarm should be UL listed the equipment should be ISO 13485 facility) (Approved makes OHIO medical /Amvex/Biolume)
161Supply, installation, Commissioning and testing of Automatic Oxygen Gas manifold with Panel suitable into operate 2 x 4 Cylinder complete with all necessary connection all as specified. Please Enable Macros to View BoQ information
162Supply, installation, Commissioning and testing of Automatic Oxygen Gas manifold with Panel suitable into operate 2 x 4 Cylinder complete with all necessary connection all as specified. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58407783
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Providing Of Certain Sanction Works At Palampur Mil Stn Under Ge Palampur
Basic Detail
Tender No GEP-98/2026-27
Bidding Type Tender
Location
City Kangra
State Himachal Pradesh
Key Dates
Publish Date 05 Nov 2026
Submission Date 26 Nov 2026
Open Date 03 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 60000
Exemption Not Available
Document List
td.pdf
Tendernotice_1.pdf
BOQ_894485.xls
d74f245e-2e5c-40a5-af0b-1ea3e0bd9dde.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
pdf

td.pdf

pdf

Tendernotice_1.pdf

xls

BOQ_894485.xls

html

d74f245e-2e5c-40a5-af0b-1ea3e0bd9dde.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender