Tender For Special Repair To Bldg No P-2 At Kalimpong Mil Stn Under Ge 867 Ews.
Tender Value
38.40 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
14 days left
EMD
76800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-2 At Kalimpong Mil Stn Under Ge 867 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards any thickness, including cover fillets, etc. complete all as specified and as directed. |
| 2 | S&F 5 mm thick wood grain colour PVC sheet in strips & Channel feathered at the edges for fixing on solid PVC Wall lining, ceiling insulated PVC wall lining, Ceiling and solid PVC Partition inclusive solvent cement and including aluminium frame / wooden batterns / hanging with 2 mm thick G.I. (upto 1200 mm length adjusting level fixed to roof slabs/ Roof truss by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long frame work and fixing at site, etc. complete all as specified and as directed. |
| 3 | S&F 5mm thick wood grain colour PVC sheet fillet of width 35 mm for wall pannelling or ceiling inclusive of fixing on to wall to make PVC frame as per specification and drawing, etc. complete all as specified and as directed. |
| 4 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition, etc. complete all as specified and as directed. |
| 5 | M&L for RCC (Nominal mix) type B-1 (1:2:4) (using 20mm grading stone aggregates) as in foundation beam, bases for column etc basement slab, etc. complete all as specified and as directed. |
| 6 | M&L for RCC (Nominal mix) type B-1 (1:2:4) (using 20mm grading stone aggregates) as in columns, pillar, pier, post and struts, etc. complete all as specified and as directed. |
| 7 | M&L for RCC (Nominal mix) type B-1 (1:2:4) (using 20mm grading stone aggregates) as in roof and plinth beam, etc. complete all as specified and as directed. |
| 8 | M&L for RCC (Nominal mix) Type B-0 (1:2:4) (using 12.5mm graded stone aggregate) as in beams, cantelivers, bressmers, lintel over 1.5m span, etc. complete all as specified and as directed. |
| 9 | M&L for form work to sides of concrete foundations, footing, bases of columns raft and raft beams, side of soffits ( if any) of foundation and plinth beams and similar work as in vertical or to batteras in flat and rough finished surfaces of concrete, etc. complete all as specified and as directed. |
| 10 | M&L for Form work to sides and soffit of floor or roof beams, beam haunching, girders as in flat and rough finished surfaces of concrete, etc. complete all as specified and as directed. |
| 11 | M&L for Form work to sides of pillars, posts, struts, piers, columns and stanchions of square rectangular or poligonalas in flat and rough finished surfaces of concrete, etc. complete all as specified and as directed.specified and as directed. |
| 12 | M&L for 10mm dia and over mild steel TMT bars including cut to length bent to shape as required, cranking binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips, etc. complete all as specified and as directed. |
| 13 | M&L for 6mm to 8 mm dia mild steel TMT bars as stripus including cut to length, bent to shape as required, cranking, binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, etc. complete all as specified and as directed. |
| 14 | Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars including ashlars facings, dressed stone work and pre-cast concrete articles, etc. complete all as specified and as directed. |
| 15 | M&L for brick work sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, etc. complete all as specified and as directed. |
| 16 | Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 17 | M&L for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, etc. complete all as specified and as directed. |
| 18 | M&L for 15mm thick rendering in CM 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, etc. complete all as specified and as directed. |
| 19 | M&L for preparation and applying Two or more coats on new surface of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, etc. complete all as specified and as directed. |
| 20 | M&L for preparation of old plastered surfaces of walls and applying one coat of premium Exterior emulsion paint, etc. complete all as specified and as directed. |
| 21 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over 2mm thick wall care putty (Birla white or equivalent), etc. complete all as specified and as directed. |
| 22 | Taking down chowkhats or frame n.exc 1.50 sqm each with shutter without taking off shutters from the frame, etc. complete all as specified and as directed. |
| 23 | Taking down chowkhats or frame exc 1.50 sqm but n.exc 4.00 Sqm each with shutter without taking off shutters from the frame, etc. complete all as specified and as directed. |
| 24 | S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 Nos stainless steel hinges fixed to the frame as specified by the manufacturer, etc. complete all as specified and as directed. |
| 25 | S&F factory made uPVC White colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated).Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (powder coated) [and including 5mm thick glazing with selected quality glass, etc. complete all as specified and as directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories and net opening will be measured for payment purpose. |
| 26 | S&F Providing and fixing factory made uPVC White colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Slidingmesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, lever door handle, 3D hinges, Striker, glazing bridge, silicon sealant, doorespag etc hardware, [Touch Lock of zinc alloyed ( powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, etc. complete all as specified and as directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories and net Opening will be measured lor payment purpose. |
| 27 | M&L for 5.5 mm thick Sheet glass fixing with rubber beading and all necessary suitable arragement as required shapes of exc 0.5 sqm in each pane, etc. complete all as specified and as directed. |
| 28 | S&F in repair stainless steel wire cloth 0.36mm nominal dia if wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed. |
| 29 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off, etc. complete all as specified and as directed. |
| 30 | M&L for 10 mm thick light shade vitrified ceremic tiles of square/rectangular polished tiles area of each tile exc 0.42 sqm but n.exc 1.00 in floor/skirting etc set and jointed in neat cement slurry and pointing in white or coloured cement to match the coloure of tiles over and including 15 mm thick screed bed/backing coat in CM 1:4, etc. complete all as specified and as directed. |
| 31 | M&L for 450mm x 300mm x7mm thick Glazed ceramic tiles as in vertical surfaces jointed in neat cement slurry and pointed in white or coloured cement over including 15mm backing coat in CM 1:4, etc. complete all as specified and as directed. |
| 32 | M&L for 7 to 8 mm thick non skid ceramic coloured tiles of square/ rectangular area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors as set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in CM 1:6, etc. complete all as specified and as directed. |
| 33 | M&L for 20mm thick pre plished/Table rubbed and polished Granite of any type work as in steps, jambs, pillars, window-cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20 mm thick screed bed/backing coat in CM 1:4, etc. complete all as specified and as directed. |
| 34 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided, etc. complete all as specified and as directed. |
| 35 | M&L for 100 mm thick PCC type B-2 (1:2:4) (using 40 mm graded stone aggregate) as in leveling cot of flooring, etc. complete all as specified and as directed. |
| 36 | M&L for 75 mm thick PCC type B-2 (1:2:4) (using 40 mm graded stone aggregate) as in leveling cot of flooring, etc. complete all as specified and as directed. |
| 37 | Demolition and breaking up old broken, PVC (SWR), Cast Iron, AC, SWG soil waste and vent pipe of 75/110 mm bore including accessories set in cement mortar and removing rubbish from site, etc. complete all as specified and as directed. |
| 38 | S&F 75 mm dia PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls, etc. complete all as specified and as directed. |
| 39 | S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement, etc. complete all as specified and as directed. |
| 40 | S&F modular kitchen with chimney faber make 1200 suction 900mm, exhaust duct, kitchen floor cabinet and top cabinet, SS sliding baskets below kitchen platform, etc. complete all as specified and as directed. |
| 41 | Taking up or down 15 mm bore old GI tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site, etc. complete all as specified and as directed. |
| 42 | Cutting chases, pinning in, making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exc 20cm girth, etc. complete all as specified and as directed. |
| 43 | S&F 15 mm bore galvanised tubes of medium grade with and including all GI fitting such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug fixed to wall and ceiling or laid in/on floor, etc. complete all as specified and as directed. |
| 44 | Taking down unserviceable copper/aluminium point wiring of any description including all fittings and fixtures (switch , socket, switch socket combination, lamp holder, ceiling rose,light fittings and regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes, etc. complete all as specified and as directed. |
| 45 | M&L for point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor with proper colour coding drawn through and including PVC conduit (medium grade) with all fittings and accessories ISI marked fixed to roof,Wall,ceiling etc incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) connected to common earth dolly incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall with modular back plate and top cover for mounting switch, sockets etc including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc for one light/Exhaust fan point controlled by one, one way switch 5/6 Amps, etc. complete all as specified and as directed. |
| 46 | Description all as per item No 45.00 here-in-before but for one 3 point 5/6 Amps switch socket outlet point controlled by one switch on the same board, etc. complete all as specified and as directed. |
| 47 | Description all as per item No 45.00 here-in-before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board, etc. complete all as specified and as directed. |
| 48 | Description all as per item No 45.00 here-in-before but but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. incl modular white cover plate, etc. complete all as specified and as directed. |
| 49 | S&F 6A Modular switch of 1 way, 1 module 230 Volts, 50Hz, of ISI marked, etc. complete all as specified and as directed. |
| 50 | Fixing only retrieved form item No 44 of 6A Modular switch of 1 way, 1 module 230 Volts, 50Hz of ISI marked, etc. complete all as specified and as directed. |
| 51 | S&F 16A Modular switch of 1 way ,1 module 230 Volts,50Hz of ISI marked, etc. complete all as specified and as directed. |
| 52 | Fixing only retrieved form item No 44 of 16A Modular switch of 1 way, 1 module 230 Volts, 50Hz of ISI marked, etc. complete all as specified and as directed. |
| 53 | S&F 6A Modular Bell push of 1 module 230 Volts, 50Hz of ISI marked, etc. complete all as specified and as directed. |
| 54 | S&F Bell Ding Dong electric AC 230 Volts of single pole, etc. complete all as specified and as directed. |
| 55 | S&F 6A Socket of 2/3 pin combined 2 module 230 Volts, 50Hz of ISI marked, etc. complete all as specified and as directed. |
| 56 | Fixing only retrieved form item No 44 of 6A Socket of 2/3 pin combined 2 module 230 Volts, 50Hz of ISI marked, etc. complete all as specified and as directed. |
| 57 | S&F 6A/16A Socket of 2/3 pin combined 2 module 230 Volts, 50Hz of ISI marked, etc. complete all as specified and as directed. |
| 58 | Fixing only retrieved form item No 44 of 6A/16A Socket of 2/3 pin combined 2 module 230 Volts, 50Hz of ISI marked, etc. complete all as specified and as directed. |
| 59 | S&F 65 X 50 mm Ceiling rose of surface bakelite three terminal, etc. complete all as specified and as directed. |
| 60 | S&F Modular lamp/Angle holder insulated body with back plate for batten fitting, etc. complete all as specified and as directed. |
| 61 | S&F 10W LED retro fit B-22 holder base with poly carbonate body and aluminium heat sink Invertor lamp, etc. complete all as specified and as directed. |
| 62 | S&F 20W LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min), etc. complete all as specified and as directed. |
| 63 | S&F 10W LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min), etc. complete all as specified and as directed. |
| 64 | S&F in repairs 15W LED 3000, 4000K and 6500K slim (Warm white, Natural day light and Cool day light) compact 3 in 1 aluminium die cast dege panel, recess mounted round/Square fixture with opal diffuser and separate electronic driver, etc. complete all as specified and as directed.Make/Cat part No: LHEBMEPNUZ1W015 of Havells or equivalent of crompton or philips |
| 65 | S&F 15W LED 3000, 4000K and 6500K slim (Warm white, Natural day light and Cool day light) compact 3 in 1 aluminium die cast dege panel, recess mounted round/Square fixture with opal diffuser and separate electronic driver, etc. complete all as specified and as directed.Make/Cat part No:LHEBMEPNUZ1W015 of Havells or equivalent of crompton or philips |
| 66 | S&F 3W LED Bed side lamp of black 3000K, etc. complete all as specified and as directed.Make/Cat part No:48042 of Phillips or equivalent in Havells/Crompton. |
| 67 | S&F 35W LED building security light fitting 230V, AC of outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, etc. complete all as specified and as directed. |
| 68 | S&F 1x9W/1X10W LED light fitting of IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable light fitting, etc. complete all as specified and as directed. |
| 69 | M&L for sub main wiring along with earth wire of size two run of 1.5 sq mm + one run of 1.5 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm PVC conduit in wall/roof including taking down of existing sub main wiring, etc. complete all as specified and directed. Note: Three run of 1.5 Sq mm copper wire including one run of 25 mm of size PVC condute shall be measured as one unit length. |
| 70 | M&L for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm PVC conduit in wall/roof including taking down of old unservicible sub main wiring, etc. complete all as specified and as directed.Note: Three run of 4 Sq mm copper wire including one run of 25 mm of size PVC condute shall be measured as one unit length. |
| 71 | M&L for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm PVC conduit in wall/roof including taking down of existing sub main wiring complete all as specified and directed.Note:Three run of 6 Sqmm including one run of 25 mm of size PVC condute shall be measured as one unit length. |
| 72 | Dismantling and taking down unserviceable main switches, DBs any type / size and making good disturbed surfaces to match with the existing finishes, etc. complete all as specified and as directed. |
| 73 | S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral link of 12 way 240 Volts AC, concealed in wall, etc. complete all as specified and as directed. |
| 74 | S&F TPN DB with suitable for TPN MCB incomer, double door (IP-43), 4 Ways, built- in 100 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz, flushed in wall or fixed on surface, etc. complete all as specified and as directed. |
| 75 | S&F 40 to 63 Amps Miniature Circuit Breaker (MCB) 415V, 10KA 'C' curve of TPN in the MCB DB complete with connection testing and commissioning, etc. complete all as specified and as directed. |
| 76 | S&F 40-63 Amp Miniature Circuit Breaker (MCB) 240V, 10KA 'C' curve of DP in the MCB DB complete with connection testing and commissioning, etc. complete all as specified and as directed. |
| 77 | S&F 32 Amp Miniature Circuit Breaker (MCB) 240V, 10KA 'C' curve of SP 5 in the MCB DB complete with connection testing and commissioning, etc. complete all as specified and as directed. |
| 78 | S&F in repairs of PVC modular box type with MCB protected socket comprising PVC insulated enclosure with inbuilt plug top and socket, complete with 10 No SP MCB of 20/25 Amp rating, 'c' curve suitable for 220-240 Volts AC supply, including making necessary electrical connections, testing and commissioning, etc. complete all as specified and as directed. |
| 79 | S&F Exhaust fan made of sturdy engineering plastic complete with louvers, shutter, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 250mm includinng all fixing arrangements including taking down existing Exhaust fan and deposit to MES Store, etc. complete all as specified and as directed. |
| 80 | S&F 25 Ltrs capacity Electric water heater (Geyser) storage of wall hanging mounting type with powder coated metallic body of BEE 5 Star rated with diamond glass lined inner tank with maximum operating pressure of 8 bars incuding factory fitted thermostat maximum 75 Celsius with automatic thermal cutout and multifunctional saftey valve inculding suitable nuts & bolts for fixing arrangement operates on 230V ,maximum power consumtion -2KW with all accessories and connection pipe 15mm bore 2 Nos for hot and cold water supply, geyser saftey cord including taking down existing Geaser and deposit to MES Store, etc. complete all as specified and as directed.Make: Havells or equivalent Racold, Bajaj |
| 81 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC type C-1 (1:3:6) (uisng 20mm graded stone aggregate), GI light grade earth lead protection pipe CI Frame and cover , including necessary excavation earth work in soft/loose soil and disposal of soil to a distance n.exc 50m and necessary testing complete all as shown on electrical plate N0.3 of MES SSR Part-1, etc. complete all as specified and as directed. |
| 82 | M&L for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 4 Core, including glands, lugs, nut, bolts, washers as required at site, etc. complete all as specified and as directed. |
| 83 | Excavation in trenches for foundation in soft/ loose soil not exc. 1.5 metre wide and n.exc. 1.50m deep for LT under ground cable/pole foundation and getting out including forming bottom surface to required level or slope, etc. complete all as specified and as directed. |
| 84 | Returning, filling in, including spreading , leveling , watering and well ramming in layer not exceeding 25cm each layer, etc. complete all as specified and as directed. |
| 85 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, etc. complete all as specified and as directed. |
| 86 | Sand cushioning to underground cables provided consolidated layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches, etc. complete all as specified and as directed. |
| 87 | M&L for Sub class ‘B’bricks for covering to cable laid dry flat , with width equal to the length of brick, etc. complete all as specified and as directed. |
| 88 | S&F 40 mm dia glavanized light grade steel pipe laid in trenches or under ground/floor or road of fixed with pole for protection of cable/ Earth strip including clams with nuts & bolts, etc. complete all as specified and as directed. |
| 89 | M&L for 25mm dia GI tubing of medium grade with all fittings laid in trenches or fixing in wall, etc. complete all as specified and as directed. |
| 90 | M&L for 20mm dia GI tubing of medium grade with all fittings laid in trenches or fixing in wall, etc. complete all as specified and as directed. |
| 91 | S&F 1000 Lts Capacity Rotational moulded poly-ethylene water storage tanks of cylindrical vertical closed top icluding suitable outlet tank nipple and locking arrangements hoisted and fixed in position, etc. complete all as specified and as directed. |
| 92 | Cutting , screwing, threding and fixing GI tubing for alteration or addition size up to 25mm dia of GI tubing, etc. complete all as specified and as directed. |
| 93 | S&F 25mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed suitable for 25mm dia GI tubing, etc. complete all as specified and as directed. |
| 94 | S&F 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed suitable for 25mm dia GI tubing, etc. complete all as specified and as directed. |
| 95 | M&L for PCC type C-2 (1:3:6) (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete including finished the surfaces even and smooth without using extra cement, etc. complete all as specified and as directed. |
| 96 | S&F in repairs 25mm bore PVC float valves of high pressure with polythene float and flynuts complete screwed for iron pipe or PVC ferrule , etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 97 | S&F in repairs 25mm bore PVC float valves of high pressure with polythene float and flynuts complete screwed for iron pipe or PVC ferrule , etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender