Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #58407673

Tender For Addition/Alteration To Bldg No A-35 Of 417 Fd Hosp At Rhenock Under Ge 867 Ews.

Issued by Statutory Bodies & Commissions/Committees · South District, Sikkim
Tender Value
42.72 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
85440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
South District → Sikkim
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Addition/Alteration To Bldg No A-35 Of 417 Fd Hosp At Rhenock Under Ge 867 Ews.

BOQ

Name of Work:- ADDN/ALTN TO BLDG NO A-35 OF 417 FD HOSP AT RHENOCK UNDER GE 867 EWS.
Sl. No. Item Description
1Excavation over area n.exc 1.5m deep and getting out in soft/loose soil, etc. complete all as specified and as directed.
2Excavation over area exc 1.5m deep n.exc 3.00 and getting out in soft/loose soil, etc. complete all as specified and as directed.
3Excavation in trenches n.exc 1.50m wide and n.exc 1.50m deep for foundation and getting out in soft / loose soil, etc. complete all as specified and as directed.
4Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft / loose sioil felling under floor, etc. complete all as specified and as directed.
5Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point, etc. complete all as specified and as directed.
6M&L for PCC type D-2 (1:4:8) (using 40mm graded stone agg) in foundation filling and mass concrete, etc. complete all as specified and as directed.
7Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital pattern roof covering, etc. complete all as specified and as directed.
8S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws, etc. complete all as specified and as directed.
9S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws, etc. complete all as specified and as directed.
10Dismantling wrought iron or mild steel work of any description, etc. complete all as specified and as directed.
11S&F Roof trusses (Framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections ) including distance pieces cleats etc FE-410W (Gde E-250) quality A, etc. complete all as specified and as directed.
12Dismantling of wall and ceiling boards ( fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, etc. complete all as specified and as directed.
13S&F GI frame work of size 605 x 605mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flangesof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, etc. complete all as specified and as directed.
14S&F Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long , etc. complete all as specified and as directed.
15M&L for 4mm thick asbestos cement plain building boards, fixed or laid /inserted to GI snap grid framework with screw in ceilings, etc. complete all as specified and as directed.
16M&L for preparation of AC boards and like and applying three coats of white wash on ceiling, etc. complete all as specified and as directed.
17Demolition of brickwork or stone/boulder masonry built in cement mortor, etc. complete all as specified and as directed.
18M&L for precast cement concrete block masonry with solid blocks type C-1 (1:3:6) (using 20mm graded stone aggt), 10cm in width and setting in CM 1:6, etc. complete all as specified and as directed.
19M&L for modular fly ash bricks as in brick work straight or curved on plan exc 6m mean radious built in CM (1:6), etc. complete all as specified and as directed.
20M&L for RCC type B-1 (1:2:4) (using 20mm graded stone aggregate) as in beams cantilevers, bressumers, lintels over 1.5m span, etc. complete all as specified and as directed.
21Formwork to sides and soffits of floor or roof beam,beam hunching, girders ,bressumers,lintels, cantilevers,shelves including supports, overhangs, etc. also splays between floors and beams of fair finish surface, etc. complete all as specified and as directed.
22M&L for 10mm dia and over Mild steel TMT Bars cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip), etc. complete all as specified and as directed.
23Description all as per item No 22.00 here in before but for 5mm dia and over upto and incl 10mm dia as in stirrups, spacers and binders, etc. complete all as specified and as directed.
24Taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
25M&L for 15mm thick rendering in CM 1:6 on fair faces of brick or block concrete surfaces of wallsand finished even and smooth without using extra cement, etc. complete all as specified and as directed.
26M&L for 20mm thick rendering in CM 1:4 in two layers of 10mm each on other than fair faces of brick or block concrete masonry surfaces of walls with WPC finished even and smooth without using extra cement, etc. complete all as specified and as directed.
27M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting as priming coat , including a thick layer of wall care putty (Birla white or equivalent), etc. complete all as specified and as directed.
28M&L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whiting, etc. complete all as specified and as directed.
29Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm, etc. complete all as specified and as directed.
30Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.00 sqm, etc. complete all as specified and as directed.
31S&F Pressed steel door frame for doors, size 165 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed.
32S&F 35mm thick plain framed panelled shutter (any number of panels) of 2nd class H.W with panels of timber flat on both sides or of venerred particle boards medium density, wood particle board with commercial face veeners, etc. complete all as specified and as directed.
33S&F 2nd class hard wood 30mm thick Glazed and skeleton shutter, poen rebated and prepared to receive glass, gause,etc (without sash bar), edges of framing plain or chamfered or rounded, fitted with cut and mitred beads for securing glass etc; size of members of shutters as specified in SSR -I ,section 8, clause 8.24 (a), etc. complete all as specified and as directed.
34S&F Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings as per specification & drawing, etc. complete all as specified and as directed.
35S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification, etc. complete all as specified and as directed.
36S&F Steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay complete with glazing bars, etc. complete all as specified and as directed.
37S&F Steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay complete without glazing bars, etc. complete all as specified and as directed.
38S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; and similar work conforming to Fe.290.Gde-E-165, etc. complete all as specified and as directed.
39S&F steel ventilator with top hung shutter, including hinges, steel peg stay, etc. complete all as specified and as directed.
40S&F 3.00mm thick sheet glass, oridinary quality and glazing with oil putty in square n etc 0.5 sqm in each pane, etc. complete all as specified and as directed.
41S&F 3.00mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane , etc. complete all as specified and as directed.
42S&F Galvanised wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinted tacks or galvanised wire staples as in fly proof window and door, etc. complete all as specified and as directed.
43S&F 250 mm long Aliminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, etc. complete all as specified and as directed.
44S&F 150mm long Aluminium anodised extruded alloy handles of fabricated type fixed with screws, etc. complete all as specified and as directed.
45S&F 200mm long Aluminium anodised barrel tower bolts of extruded sections fixed with screws, etc. complete all as specified and as directed.
46S&F 75mm size butt hinges of medium weight cold rolled mild steel and fixed with screws, etc. complete all as specified and as directed.
47M&L for Preparation of new wooden surfaces of any description over 10cm width or girth not other wise described and applying two coat of synthetic enamel paint over one coat of pink primer, etc. complete all as specified and as directed.
48M&L for Preparation of new steel surfaces of any description over 10cm width or girth not other wise describedand and applying two coat of synthetic enamel paint over one coat of red oxide primer, etc. complete all as specified and as directed.
49M&L for Hardcore of gauge exc 63mm but n.exc 100mm deposited, spred and levelled in layers n.exc 15cm thick watered and rolled /rammed to a true surface, etc. complete all as specified and as directed.
50M&L for 75 mm thick PCC type D-1 (1:4:8) (using 20 mm graded stone aggregate) as in sub base or sub flooring fininshing the surface even and rough to receive the topping layer, etc. complete all as specified and as directed.
51Dismantling floor, hearth or wall tiling including cement mortar bedding, backing and removing serviceable tiles to store and rubbish off the premise, etc. complete all as specified and as directed.
52M&L for 7 to 8mm thick joint free non skid ceramic colured tiles of area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors and pointd in coloured cement to match, set & jointed in neat cement slurry over and including 15mm screed bed or bedding layer in CM 1:6, etc. complete all as specified and as directed.
53M&L for 300 x 200mm x 7mm thick glazed ceramic coloured tiles on vertical surfaces such as skirting, dados, set & Jointed in neat cement slurry & pointed in colour cement to match over and including 10mm thick rendering/backing coat in CM 1:4, etc. complete all as specified and as directed.
54Demolition of cement concrete (Unreinforced) in ground floor and pavings n.exc 15cm thick ness (below or above ground level), etc. complete all as specified and as directed.
55M&L for 75mm thick PCC type C-1 (1:3:6) (using 20mm graded stone aggregate) as in path, plinth protection, etc. complete all as specified and as directed.
56S&F 110 mm bore PVC (SWR) Pipes of single socketed in any length with rubber ring joints laid in trenches or in floor, etc. complete all as specified and as directed.
57S&F 110mm bore PVC (SWR) bends of any radius, etc. complete all as specified and as directed.
58S&F 75mm PVC (SWR) pipes of single socketed in any length with rubber ring joints, laid in trenches or in floors, etc. complete all as specified and as directed.
59S&F 75mm bore PVC (SWR) bends of any radius, etc. complete all as specified and as directed.
60S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, etc. complete all as specified and as directed.
61S&F 15mm bore GI galvanizedtube of medium grade with all fittings & fixed complete to walls & ceiling or laid in floors, etc. complete all as specified and as directed.
62S&F 15mm bore GI galvanized tube of medium grade with all fittings & fixed completet laid in trenches, etc. complete all as specified and as directed.
63S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), etc. complete all as specified and as directed.
64S&F Fancy type CP Health faucet (ABS Body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, etc. complete all as specified and as directed.
65S&F 10 ltr capacity low level PVC valve less, syphonic action type flushing cistern, with inlet, ball valve float, flush pipe and handle including brackets, etc. complete all as specified and as directed.
66S&F Vitreous china WHB 550x400 mm white flat back including pedestal and bracked, etc. complete all as specified and as directed.
67S&F 15mm dia fencey type CP pillar tap of cast copper alloy capstan heads screwed down high pressure long screwed shanks and fly nuts screwed for iron pipe fixed with wall flanges, etc. complete all as specified and as directed.
68S&F 15mm bore fancy type CP Stop cock of cast copper falloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions fixed with wall flanges, etc. complete all as specified and as directed.
69S&F 15mm size PVC connection with PTMT nuts of length 450mm, etc. complete all as specified and as directed.
70S&F 15mm dia fancy type CP Bib taps of cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed with wall flanges, etc. complete all as specified and as directed.
71S&F Sheet glass shelf fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 300 gms), etc. complete all as specified and as directed.
72S&F Towel rail 600 mm long of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 190 gms), etc. complete all as specified and as directed.
73S&F 600 X 450 mm bevelled edge mirror, of selected quality glass, mounted on 6mm thick AC building board or commercial playwood and fixed to wooden plugs with chromium plated brass screw and cup washer, etc. complete all as specified and as directed.
74S&F 25mm dia decorative type curtain rod (curtain rails) of stainless steel (SS-304 grade) including suitable selective choice decorative knobs and brackets fixed with wall flange and screws including takingdown existing curtain rods, etc. complete all as specified and as directed by Engr-in-Charge.
75M&L for PCC type D-2 (1:4:8) (using 40 mm graded crushed stone aggregate) as in conrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in 110mm dia, etc. complete all as specified and as directed.
76Form work to sides of concrete foundations, footings, bases of columns and plinth beam and similer work etc in rough finished surfaces of concrete flat, etc. complete all as specified and as directed.
77M&L for PCC type C-2 (1:3:6) (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.
78Taking down old existing copper/aluminium point wiring (light fan, Socket or power) Complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. complete all as specified and as directed.
79Disconnection and taking down distribution boards, switch fuse unit, enclosure for MCB/MCB Box including MCB's of any type and size and keeping aside for reuse of serviceable one, etc. complete all as specified and as directed.
80M&L for concealed point wiring with 1.5 Sqmm (nominal area) PVC insulated unsheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm size, medium grade with all necessary fittings, concealed wiring, for light / Exhaust fan point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed for mounting of fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover, for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion, etc. complete all as specified and as directed.
81Description all as per item No 80.00 here in before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board, etc. complete all as specified and as directed.
82Description all as per item No 80.00 here in before but forOne 3 pin socket outlet 5 Amps on the same board with other switchs with cables 1.5 Sqmm size, etc. complete all as specified and as directed.
83Description all as per item No 80.00 here in before but forone switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable, etc. complete all as specified and as directed.
84M&L for 6A Modular 3 switch 1 way, 1 module, etc. complete all as specified and as directed.
85M&L for 6A - Modular socket outlet 2/3 pin combined 2 module, etc. complete all as specified and as directed.
86M&L for 6A/16A - Socket 2/3 pin combined 2 module, etc. complete all as specified and as directed.
87M&L for Modular switch 1 way 16A, 1 module, etc. complete all as specified and as directed.
88M&L for Modular white or Ivory cover plate with frame, 3 module, etc. complete all as specified and as directed.
89M&L for Modular white or Ivory cover plate with frame, 6 module, etc. complete all as specified and as directed.
90M&L for Modular white or Ivory cover plate with frame, 8 module, etc. complete all as specified and as directed.
91S&F Metal Flush box 3 module, etc. complete all as specified and as directed.
92S&F Metal Flush box 6 module, etc. complete all as specified and as directed.
93S&F Metal Flush box 8 module, etc. complete all as specified and as directed.
94S&F 65 X 50 mm Ceiling rose surface bakelite three terminal, etc. complete all as specified and as directed.Make : Anchor/Havells/Plaza
95S&F 1x 18W LED lights fitting of 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, etc. complete all as specified and as directed.
96S&F 2'x2' LED ceiling light fully diffused recessed mounted 2'x2' LED luminaire with high transmitive diffuser suitable for indoor spaces including necessary connection and dismantling of existing defective fitting, etc. complete all as specified and as directed.Make/Cat part No : Crompton cat part No \\"LCTLRP-24-FO-CDL\\" or equivalent make in Philips/Havells.
97S&F 35W LED street light fitting 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, etc. complete all as specified and as directed.
98S&F 10W LED light fitting mirror type with high out put diffuser 2 feet, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, etc. complete all as specified and as directed.
99S&F Lamp/angle holder insulated body with back plate for batten fitting, etc. complete all as specified and as directed.Make : Anchor/Havells/Plaza
100S&F 12W LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink, etc. complete all as specified and as directed.
101S&F Decorative, wall mounting fixture in durable plastic body & designer mesh in gold finish suitable for 14 W retrofit CFL including necessary connection with 0.5 sqmm PVC sheathed 3 core copper cable and 14W LED lamp, etc. complete all as specified and as directed.Model \\"Glaze\\" of make : Havells or equivalent in Philips/Bajaj
102S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 12 way 240 Volts AC, etc. complete all as specified and as directed.Make- Legrand or equivalent in Siemens/Schindler.
103S&F MCB Single pole and neutral 40 Amps capacity 10 KA 240 Volts 50 HZ, 'C' curve. Cat part No. 4086 18, etc. complete all as specified and as directed.Make : Legrand or equivalent in Siemens/Schneider.
104S&F MCB single pole (SP), 10 kA of 6 -32 Amps capacity 240 Volts, 'C' curve, etc. complete all as specified and as directed.Make/Cat part No. 4085 95 of Make : Legrand or equivalent in Siemens/Schneider
105S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240V, etc. complete all as specified and as directed.
106Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor, etc. complete all as specified and as directed..NOTE : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.
107Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor, etc. complete all as specified and as directed..NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.
108M&L for Earthing in repairs complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC type C-1 (1:3:6) 50 mm thick pre cast RCC type B-1 (1:2:4) cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed, etc. complete all as specified and as directed..
109S&F Electric storage type water heater of 25Ltr capacity, 2000Watt, vertical type including necessary angle cock, inlet and outlet water connecting pipe and electric connection, etc. complete all as specified and as directed.Make/model No : \\"Misty 25 Ltr\\" of Usha or similar model of RACOLD/BAJAJ
110S&F Exhaust fan 250 mm sweep 1200 RPM with minimum airflow/air delivery 450 Cmh, light weight, rust proof body & blades, self opening louvers for protection from birds & rain water, IP-55, 200-240 Volt AC supply, rated power input not more that 30watt, connecting up including provison of cable from ceiling rose to fan, etc. complete all as specified and as directed.Make : Crompton Greaves, Model : BRISK AIR , or equivalent in USHA/Bajaj.
111M&L for sand cushioning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches, etc. complete all as specified and as directed.Note :- Only Puned layers shall be measured.
112Supply and laying reinforced precast concrete cable cover class LV type 1 flat size 250mmx150mmx40mm laid in trenches for cable protection, etc. complete all as specified and as directed.
113Supply and Laying in replacement of cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor on wall with the help of shadel of size 25Sqmm 4 core as required at site, etc. complete all as specified and as directed..
114M&L for 40 mm bore GI tube light grade for passing through cables under the floor ,along the wall or along the pole and fixed to the poles/walls with suitable size of MS clamps and nut and botls/washers including taking down exisiting pipe, etc. complete all as specified and as directed.
115S&F 25mm bore dia Gun metal, globe or gate valves of following bore dia., with iron wheel head, screwed both ends for iron pipes and fixed taking down exisiting one etc. complete all as specified and as directed.
116S&F 20mm bore dia Gun metal, globe or gate valves of following bore dia., with iron wheel head, screwed both ends for iron pipes and fixed taking down exisiting one etc. complete all as specified and as directed.
117S&F 1000 Ltrs capacity Rotational moulded polythene water storage tank ( cylindrical vertical with closed tops ) hoisted and fixed in position with tank cover and all necessary connection of tank nipple including taking down existing tanks, etc. complete all as specified and as directed.
118S&F 25mm dia GI galvanized steel water tubing of Medium grade with all fittings and laid in trenches or on ground taking down exisiting pipe, etc. complete all as specified and as directed. (Excavation and earth work measured and paid separately)
119S&F 20mm dia GI galvanized steel water tubing of Medium grade with all fittings and laid in trenches or on ground taking down exisiting pipe, etc. complete all as specified and as directed. (Excavation and earth work measured and paid separately)
120S&F 20mm bore PVC float valve, high pressure with polythene float and fly nut complete screwed for GI/PVC pipe taking down exisiting one, etc. complete all as specified and as directed.
121M&L for taking up or down existing steel tubing, cutting, screwing the same for alterations or additions in position including refixing old steel tubing and connections in new or old position by means of equal 'T' of Reduced 'T' junction of dia upto 50mm complete, etc. complete all as specified and as directed.
122M&L for construction of angle iron stage made out of MS equal angle of suitable size of thick complete including fabricated work and painting of structure all as per directed at site, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information
123M&L for construction of angle iron stage made out of MS equal angle of suitable size of thick complete including fabricated work and painting of structure all as per directed at site, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58407673
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 42.72 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Addition/Alteration To Bldg No A-35 Of 417 Fd Hosp At Rhenock Under Ge 867 Ews.
Basic Detail
Tender No 8649/E8
Bidding Type Tender
Location
City South District
State Sikkim
Key Dates
Publish Date 05 Nov 2026
Submission Date 26 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 42.72 Lakhs
Tender Fee 500
EMD 85440
Exemption Available
Document List
3b30376f-23ce-4080-a8e7-b104e304fd5f.html
BOQ_894654.xls
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

3b30376f-23ce-4080-a8e7-b104e304fd5f.html

xls

BOQ_894654.xls

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender