Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #58406994

Tender For Provn Of External Water Sup Line With Pumping Set And Bore Well At Suri Enclave At Mil Stn Beas Under Ge Kapurthala

Issued by Statutory Bodies & Commissions/Committees · Kapurthala, Punjab
Tender Value
40.27 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
80540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of External Water Sup Line With Pumping Set And Bore Well At Suri Enclave At Mil Stn Beas Under Ge Kapurthala

BOQ

Name of Work:- Provn of external water sup line with pumping set and bore well at Suri enclave at Mil Stn Beas under GE Kapurthala
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Provn of external water sup line with pumping set and bore well at Suri enclave at Mil Stn Beas under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2M&L for trial boring/drilling of borewell with direct rotary/ reverse rotary rig method or as per site requirement of suitable size not less than 250 mm dia upto 200 mtr depth below ground level. The drilling of bore shall be done by DTH-cum-rotary or reverse rig method by deploying suitable machinery of suitable size and different cutters through any kind of soil strata including boulder, rock, hard stone etc including all arrangement for circulation of water using bentonite or silly clay (Quantity/content mixed as per manufacturer recommendation or as directed by Engineer-in-Charge as per site or soil condition including disposal of spoil from the site n.exc 500 mtr and site clearance) complete all as specified & directed.
3- ditto - all as per item ser No 1 above here in before but exceeding 200meter depth below ground level and upto 400 Rm.
4Development of bore wells including flushing out tree roots, site, fine sand by air compressor of suitable capacity not less than 1200 CFM at 350 PSI & cover pumping (25% extra capacity pump) to make water free from turbidity till clear water is obtained from the bore wells completeall as specified and directed (Pumping for minimum 16 hours in two stage of continuous 8 hours with an interval of 01 hour after first 8 hour) The upper limit for duration of development shell be the time technically required to give results of development as per ISS.Note :- Extra pumping shall be payable on account of increase in numbers of pumping hours actually required at site above 16 hours will be measured at Per Hours quoted price.
5Supplying, assembling, jointing and lowering 6.00 mm (minimum) wall thickness 350 mm dia (internal) ERW MS housing pipes, heavy duty conforming to IS-4270-2001 or IS-3589-2001 (Steel tubes used for water wells) upto depth of 100 Mtr below ground level and fixing in position (including necessary cleaning internal and external and painting inside of pipes with two coats of black bitumin paint suitable for drinking purpose) in different depth as directed, plain ended, jointed heavy duty suitable size collar and with electric welding incl 20x4 mm of suitable length MS flat Iron contact guide in each joint (04 Nos of each joint) with butt welding joint complete surrounding the pipe in both ends for Development/ expanding of trial bore for new borewell complete all as specified and as directed. Note :- Pipe shall be of 06 Mtr unless required in smaller lengths as per borewell requirement.
6Supplying MS reducer 350mm to 250 mm and fixing into bore hole MS pipes ERW grade threaded and socketed joint, 8 mm wall thickness, both ends plain as per IS-4270-2001 or IS-3589-2001 including welding of both ends complete all as specified and directed.
7Supplying, assembling, jointing and lowering 6.00 mm (minimum) wall thickness 250 mm dia (internal) ERW MS housing pipes, heavy duty conforming to IS-4270-2001 or IS-3589-2001 (Steel tubes used for water wells) depth exceeding 100 meter to 200 meter below ground level and fixing in position (including necessary cleaning internal and external and painting inside of pipes with two coats of black bitumin paint suitable for drinking purpose) in different depth as directed, plain ended, jointed heavy duty suitable size collar and with electric arc welding 20x4 mm of suitable length MS flat Iron contact guide in each joint (04 Nos of each joint) with butt welding joint complete surrounding the pipe in both ends for Development/ expanding of trial bore for new borewell complete all as specified and as directed. Note : Pipe shall be of 06 Mtr unless required in smaller lengths as per borewell requirement.
8- ditto - all as per item ser No 6 above here in before but depth exceeding to 200 meter to 230 meter below ground level.
9Supply, assembling, fixing and lowering 250 MM steel strainer (Slot size 0.75 mm) 7.30 mm thickness Stainless steel Cage type wire wound screen as per IS : 8110-2000 or latest ISI marked duly welded with suitable grade S.S. welding electrode to lower the strainer into tubewell bore upto depth of 260 Mtr below ground level or as per output of electro logging complete all as specified and directed.
10M&L for stabilizing and yield testing after completion of bore well by using V.T./ Submersible pump set of adequate capacity as per specifications till yield of bore well and draw down of the bore well is ascertained to determine safe pumping Yield till the clearance of the sand free water and its discharge at appropriate head complete job all as specified and directed with the following :- (a) Collection of water samples from bore well and getting them tested chemical and bacteriological analysis from recognized institution approved by Govt Lab. (b) Test on quality of water for drinking purposes. Note :- The quoted rate includes cost of material and labour charges.
11S&F of 8mm thick MS bail plug for 350 mm bore dia pipe, min 700mm long with strong iron hook of min 25mm dia, screwed & welded to the casing pipe (length of pipe required to be fixed with bail plug will be measured and paid for separately under relevant item.)
12S&F of MS well cap suitable for 350 mm dia casing pipe with 4 Nos 18 mm dia nuts , bolts and washers 7 MS clamp fabricated from flat iron 100 x 16 mm thick duly drilled holes of suitable size including painting with two coats of synthetic enamel paint over a coat of red oxide primer including centering guide, end cap, ring and housing clamp, MS Strip, MS Iron Clamp, washers, nut & bolts etc fixed at bottom of casing pipe scomplete all as specified
13M&L for electro logging by using computerized composite machine or latest technology for ascertaining the location and probable yield for precise delineation of aquifer as well as determing the placing of slotted pipe at appropriate depth complete with submitting report to Engr-in-charge complete all as specified and directed.
14M&L for sample starta box made out of 20mm thick veneered particle board with 25mm x 25mm aluminium angle 2mm thick base overall length 1200mm x 750mm x 100mm with top glass sheet sliding type cover with locking arrangement having 12mm thick plywood inside to make compartments of size 100mm x 100mm with soil sample strata obtained from various depths of boring at interval of 3 Mtr each complete mentioning name of tube well, location and starta sample with depth including painting of synthetic enamel paint over to a coat of wood primer complete all as specified and directed.
15M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in block mass concrete below ground level all around the borewell all as specified and directed.
16Supplying and laying 100 mm bore GI column pipe heavy grade ISI marked in standard length of 3 meter each duly threaded with both ends with and including long threaded heavy duty socket and fittings and lowering into well including supplying, lowering, fixing, commissioning & testing complete all as specified and directed
17Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for taking out and laying CI/GI pipe complete all as specified and directed.
18Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer complete all as specified and directed.
19Removal of surplus spoil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
20M&L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified.
21M&L for old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed.
22Supply, Laying, jointing and testing XLPE PVC insulated & PVC sheathed LT cable, 1100 volts grade (heavy duty )with stranded aluminium conductor, cross sectional area 95 Sqmm 3.5 core fixed along the poles or passing through pipes or laid under floors or through walls complete all as specified.Note :- Earthwork, sand cushioning, brick protection and GI pipe to be measured and paid for separately under respective items.
23Supply, laying, jointing and testing new DI pipe 150 mm bore including special class \\"K-7\\" spigot and socketed ends in any length laid in trenches complete all as specified and directed.Note :- QUOTED rate deemed to be including DI fitting viz elbow/ bend/ sockets/ couplings/ gaskets/ ring/ flange/ tee etc; and new run lead joint/ rubber Joint.
24Supply, laying, jointing and testing new DI pipe 100 mm bore including special class \\"K-7\\" spigot and socketed ends in any length laid in trenches complete all as specified and directed. Note :- QUOTED rate deemed to be including DI fitting viz elbow/ bend/ sockets/ couplings/ gaskets/ ring/ flange/ tee etc; and new run lead joint/ rubber Joint.
25M&L for tapping 100mm dia pipe line in existing CI/GI pipe line by cutting chasing line insert necessary fitting and accessories etc complete all as specified and directed.
26S&F of CI double flanged Non -return valve of the 100mm dia bore, class 'B', High pressure PN 1.6 conforming to ISI marked, including bolts, nuts, washer and rubber packing all as specified and directed.
27S&F of iron fitting such as bends, tapers, (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \\"Y\\" junction, double branch, cross(all sockets or socket and spigot) collars, caps and plugs tee pieces, single branch for spigot and socket and flanged pipe up to 150 mm bore complete all as specified and directed.
28S&F of cast iron sluice valve 150 mm bore with flanged ends, ISI mark with gun metal spindle, CI gate with brass ring and iron wheel handle with jointing material such as nuts /bolts washers and rubber insertion sheet etc complete all as specified
29S&F of cast iron sluice valve 100 mm bore with flanged ends, ISI mark with Gun metal spindle, CI gate with brass ring and iron wheel handle with jointing material such as nuts /bolts washers and rubber insertion sheet etc complete all as specified
30S&F of submersible pump set, electric driven having discharge 1000 LPM at 84 mtr head including suitable capacity of electric motor not less than 30 HP suitable for operation of 415 volts 50 C/S AC supply
31S&F of of PVC insulated submersible cable 03 core 1100 Volt AC Supply stranded copper conductor of size 16 sqmm
32M&L for double air release valve of size 150 mm bore inl bolts, nuts gaskets if any complete all as specified and directed.
33M&L for valve pits of internal dimensions 90cm x 90 cm x 90 cm (Internal dimension) making good disturbed/dismantled brick work in cement mortar (1:4) plastering surfaces in CM 1:6, 15mm thick and PCC coping in cement concrete 1:2:4 type B-1 and providing MS cover in replacement made out of MS sheet 3 mm thick duly welded to MS angle iron frame 35x35x5mm including frame work as per existing size with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.(a) M&L for brick work using sub class 'B' (old size bricks) in CM 1:4 (b) M&L for rendering 15 mm thick in CM 1:4 finishing even and fair (c) M&L for PCC 1:2:4 type B-0 (using cum 12.5 mm graded stone aggregate ) as in coping (d) M&L for any type of mild steel work such as frame sheet 3 mm thick including welding (e) M&L for painting two coats of synthetic enamel paint over a coat of red oxide primer to untreated steel surface & prep of surface.
34Earthing complete with galvanised steel earth plate electrode 60cmx60cm x6mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below ground level, earth plate connected to GI earthing strip(32x6mm) as earthing lead for transformer/feeder pillar box etc by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical Plate No 5 of MES Sch. part I and testing on completion including necessary excavation and earthwork, expansive soil, adequate common salt, charcoal dust and funnel , PCC(1:3:6) type C-1 pit with precast RCC(1:1.5:3) type A-I cover, 40mm thick reinforced with 6 mm dia MS bars 3 Nos both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with funnel, wire mesh, with 20mm dia GI medium grade watering pipe earthing lead from earth plate to equipment earth point complete all as specified.(GI earthing strip shall be measured and paid separately.)
35Supplying, installation, testing and commissioning of LT Distribution Panel (CPRI type tested) cybicle type IP-65 , Outdoor type confirming to IS-61439 factory fabricated prewired made out of 3.15 mm thick CRCA sheet outer & 2 mm thick CRCA sheet inner of suitable size to accommodate all accessories/ fittings compartmentalized in construction to accommodate the incoming/outgoing MCCB ad TPN bus bars and outgoing feeders. The TPN bus bars shall be insulated with colour coated heat shrinkable sleeve and shall be mounted on DMC support. The incoming as well as outgoing MCCBs shall have extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The extension links shall be supported on DMC support having provision of termination of incoming and outgoing cables. All extension links/ interconnections shall be colour coated sleeves. The cubicle shall have frame work at bottom of MS channel MC 100 fixed to the top of plateform. The plateform of LT Panel shall be pedestal type of suitable width and 600 mm height above ground level and minimum 400 mm below the ground level constructed with bricks (sub class 'B') work duly plastered in CM 1:3 and PCC copping (1:2:4) not less than 50 mm thick over brick pedestal with adequate opening for entry of cable complete as per manufacture recommendation and directed by the Engr-in-Charge. A detachable gland plate of thickness not less than 3 mm thick should be used at the bottom for entry of armoured cable of adequate size compression glands, the panel shall be painting with powder coated finish with RAL 7032 SIEMENS GRAY structure after seven tank phosphate treatment front & back opening type and fixing 2 Nos danger notice plan with letter figures and conventional skull bones in signal red colour and fixed front & back door to LT Panel with voltage and danger indicated in Hindi and English with double door shutter and shall have louvers and air vent gasket for natural flow of air Neoprene Adhesive type gasket shall be used to make panel vermin proof and comprising of following :- (a) Aluminium bus bar of capacity 300 Amps for TPN. (b) Combined Voltmeter & Ammeter 0 to 500 Amps digital type with built in selector switch CTS of suitable ratio (Set of Three)Incoming :- (i) MCCB 4P 200 Amps, 36 KA 415 Volts (microprocessor release)- 01 No(ii) On load changeover switch 200 Amp, 4 pole
36Outgoing :- (i) MCCB FP 63 Amps 36 KA, 415 Volts (adjustable thermal and magnatic type70% to 100%)- 02 No (ii) MCCB FP 40 Amps 16 KA 415 Volts (adjustable thermal and magnatic type70% to 100%)- 02 No(iii) MCB TPN, 40 Amps, 16 KA 415 Volts.- 02 No's(v) Automatic Star Delta Starter for Pump having capacity of 40 HP :- 02 Nos(a) Over Voltage/ Under Voltage protection(b) Over Load/ Under load protection(c) Single phase protection(d) Reverse polerty protectionNote :- The Front gate should be in designed where Indicator lamp, Volt meter and Amper meter portion of panel will be seen from the out side of panel and cutting portion cover with fiber glass sheet for water proof.
37S&F of new GI tubing medium grade 20 mm bore in any length with all fitting laid in trench and connecting up with water supply main complete all as specified and directed.Note :- Excavation and earthwork shall be measured and paid for separetely under approprite item.
38- ditto - all as per item ser No 35 above here in before but 25 mm bore complete all as specified and directed.
39Taking down old u/s bleching dozing pump along with all accessories and Supply and install connecing. Testing and commissioning of High Pressuure single Head adjustable Dosing system of the following specification. Adjustble High Pressure 5 Kg/Sq. cm. power input 230V, 50 Hz, 40 SPM 1/30 fractional Horsepower, Max output 10 Ltr with mandatory accessories like lead Tubing, connecting ferrules, check valves, etc (A) Preparation tank Model No VST 1005 of net capacity 100 Ltr, FRP dosing tank dia 650 x net Height 375 + conical 300. Gross height with stand 1000 mm consisting of : (i) Water inlet line (ii) Outlet with stainer (iii) Drain (iv) overflow (v) conical bottom for sludge depositing (vi) Pot hole with cover (vii) level gauge (viii) Agitator 120 watt 900 RPM single phase flange mounted motor with plastic shaft and impeller. (B) Service Tank dia 480 x height 575 net capacity 100 Ltr consisting of (i) water inlet line (ii) Dosing pump inlet arrangement (iii) Drain (iv) Overflow (v) Level Gauge (vi) inspection port (vii) Agitator 120 watt 900 RPM Single Phase flange mounted moto with plastic shaft and impeller (ix) provision of mounting Pump on Lid/wall complete all as specified and directed.
40Supplying and packing pea gravels of size 5.00mm to 8.00mm all around the casing pipe and slotted pipe in the well bore to entire depth complete all as specified (volume of pea gravels shall be measured before filling in bore) Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58406994
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 40.27 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of External Water Sup Line With Pumping Set And Bore Well At Suri Enclave At Mil Stn Beas Under Ge Kapurthala
Basic Detail
Tender No 8223/E8
Bidding Type Tender
Location
City Kapurthala
State Punjab
Key Dates
Publish Date 06 Nov 2026
Submission Date 26 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 40.27 Lakhs
Tender Fee 500
EMD 80540
Exemption Available
Document List
a5d77058-16d6-4eaf-a905-5cc24fde0717.html
BOQ_894543.xls
Tendernotice_1.pdf
TENDER_8223.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

a5d77058-16d6-4eaf-a905-5cc24fde0717.html

xls

BOQ_894543.xls

pdf

Tendernotice_1.pdf

pdf

TENDER_8223.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender