Tender For Special Repair To Govt Md Accn Bldg No P-3/1-8, Staging Camp At New Cantt Prayagraj
Tender Value
42.52 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
5 days left
EMD
85040
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Govt Md Accn Bldg No P-3/1-8, Staging Camp At New Cantt Prayagraj
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 2 | M&L for coloured glazed ceramic tiles in vertical surface 300mm x 450mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc, complete all as specified and directed. |
| 3 | M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.09 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 4 | M&L for non skid ceramic colour tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 5 | Descripiton same all as item No 4 here-in-before but on vertical surfaces including 10mm thick screed plaser in CM 1:4, complete all as specified and as directed. |
| 6 | Removing of surplus excavated/demolised materilas to a distance exceeding 50 mtr and not exceeding 1.5 Km away complete all as specified and as directed. Note : Demolished material should not be thrown away on the ground from the top of roof, it should be removed from the roof by manually or by any mechanical means |
| 7 | Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrived material upto a distance not exceeding 100 mtr where directed complete all as specified and directed. |
| 8 | Demolition of mud in roof, any thickness including plastering and leaping (where full thickness recoved or only a part there of disposal off rubbish upto a distance not exceeding 100 mtr, complete all as specified and directed. |
| 9 | M&L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed.Note - Average thickness shall not exceed 40mm complete all as specified and directed. |
| 10 | M&L for rendering 10mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:3 complete all as specified and directed. |
| 11 | M&L for normal water proofing treatment on roof slab consisting with following operations complete all as specified and directed :-(i) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wire brush & dusting, apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Ltr/Sqm on the surface. Laying 3mm thick APP membrane habing non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm i.e overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners. The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor. (ii) Again applying hot bitumen 85/25 @ 1.2 Kg/Sqm over water proofing membrane.Note - The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability, < 0.5% when tested as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufacturers. |
| 12 | M&L for ceramic cool roof tiles, 10mm thick, area of each tile not exceeding 0.11 Sqm as in floor over roof slab etc set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 13 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exceeidng 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. |
| 14 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each, complete all as specified and directed. |
| 15 | Taking down shutters of any description exceeding 1 Sqm each and and removing to store etc complete all as specified and directed. |
| 16 | Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ ceosetory windows & other Frames/Chowkhat of size 50mm x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 17 | Descripiton same all as item No 16 here-in-before but but of Frame size 65mm x 125mm |
| 18 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category withproperty of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note : Stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 19 | S&F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg/Cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos M.S powder coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19mm x 6mm size steel screws etc, complete complete all as specified and directed as per manufacturer's specification & drawings. Please Enable Macros to View BoQ information |
| 20 | S&F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg/Cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos M.S powder coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19mm x 6mm size steel screws etc, complete complete all as specified and directed as per manufacturer's specification & drawings. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender