Tender For Special Repair To Toilet Blocks (T-138C, T-139C And T-114) Of 27 Mtn Div Sig Reft At Kalimpong Mil Stn Under Ge 867 Ews.
Tender Value
38.82 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
15 days left
EMD
77640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Toilet Blocks (T-138C, T-139C And T-114) Of 27 Mtn Div Sig Reft At Kalimpong Mil Stn Under Ge 867 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engr-in-Charge. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed. |
| 5 | S&F joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc confirming to Fe 410-W (gde 250 quilty A) complete all as specified and directed. |
| 6 | Refixing only steel truss, rafter and purlin of different size bend to shape, cut to length etc, including necessary welding, special shape washer as directed by Engr in Charge |
| 7 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. |
| 8 | S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction. (Make : Everest or equvalent as approved by GE) |
| 9 | Demolition of brick work or stone/boulder masonary buit in cement mortar including all quions ,arches ,pillars etc but excluding ashler facing dressed stone work and precast concrete and directed. |
| 10 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 11 | M&L for brickwork with sub-class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 12 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for grouting hold fasts , coping, filling in pressed steel chowkat or similar work including necessary form work as required complete all as specified and directed. |
| 13 | Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 14 | M&L for 10 mm thick rendering in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement) complete complete all as specified and directed. |
| 15 | M&L for 15 mm thick rendering ( in two coats 10mm+5mm) on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 2% by weight of cement in 2nd coat or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only. |
| 16 | Supply only integral water proofing compond all as specified and as directed. |
| 17 | M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces cement mortar 1:3 on concrete surface as in ceiling/chajja and RCC surfaces , to be finished even and smooth (without using extra lime or cement)complete all as specified. |
| 18 | M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed. |
| 19 | M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash as in wall complete all as specified and directed. |
| 20 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed. |
| 21 | M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of cement base paing complete all as specified and directed. |
| 22 | M&L for preparation of old decorated surfaces of walls, chajjas and applying two coats of cement base paint complete all as specified and directed. |
| 23 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed. |
| 24 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 25 | M&L for 350x 250x 7 mm or 450X 350X 7mm thick coloured glazed ceramic tiles fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick rendering in CM 1:4 finished even and rough complete all as specified and directed |
| 26 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar |
| 27 | M&L for Granite (of any type) work 20MM thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms,counter washbasin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr - in - Charge. |
| 28 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed. |
| 29 | M&L for reinforced cement concrete type B1 1:2:4 (20mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 30 | Providing precast RCC (1:2:4) type B-I (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 including necessary formwork complete all as specified.Note: Reinforcement shall me measured and paid for separately. |
| 31 | Formwork to soffits of suspended slabs such as roof slabs, cooking plotforms, shelves etc including supports, overhangs, edges in flat with fair finished surfaces of concrete etc. complete all as specified. |
| 32 | S&F TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 33 | Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 75/110 mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge complete all as specified and directed. |
| 34 | S&F 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 35 | S&F 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 36 | S&F 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed. |
| 37 | S&F 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed. |
| 38 | S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement complete all as specified and directed. |
| 39 | S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement complete all as specified and directed. |
| 40 | S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 41 | Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 42 | S&F 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed, |
| 43 | Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed, |
| 44 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth |
| 45 | Taking up or down 20 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 46 | S&F 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed, |
| 47 | S&F in repair water closet (squatt pattern) of vitreous china squatting pan \\"ORRISA\\" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syponic pipe ect complete including trap set in and including necessary lean cement concrete complete all specified and direction |
| 48 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 49 | S&F Vitrous china wash down water closet pan pedestal pattern white, exlcuding fixing bolts, flushing cistem & Flush pipe including PVC Seat Cover white recess bottom type mild steel chromium plated or aluminium hanging device complete all as specified and directed including dismantling existing EWC. Make Hindware, Jaquar or equivalent |
| 50 | S&F PVC high level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed. |
| 51 | S&F Vitreous China wash basin, flat back, size 600x480mm white, excluding taps, waste, chain and plug and rcelain stopper but including brackets & coupling complete all as specified and directed. |
| 52 | S&F Brass CP Basin mixure, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaquar or equivalent as approved by GE. |
| 53 | S&F in repairs Brass chromium plated shower rose with or without swivel joints 125 mm size including fixing to steel pipe or union complete all as specified and directed. |
| 54 | S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed. |
| 55 | S&F in repairs angle , stop valve 15 mm bore, chromium plated, fancy type, with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 56 | S&F in repair 15 mm bore chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 57 | S&F in repairs brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges complete all as specified and directed. |
| 58 | S&F in repairs bevelled edge mirror of selected quality glass, of any size mounting on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers, with and including aluminium edging around of mirror complete all as specified and directed |
| 59 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 60 | S&F in repairs Soap dish, CP, fixed to plugs with chromium plated brass screws complete all as specified and directed |
| 61 | Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 62 | Taking down chowkhats or frame nex exc 1.50 each with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 63 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening after Resecuring or easing & adjusting complete all as specified. |
| 64 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 65 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles a PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; t both side Prelam PVC sheet used instead of Plaincolour PVC sheet. Stile and rails feathered at edges beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 66 | S&F Pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified. |
| 67 | S&F 35 mm thick (batten thickness) second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I) |
| 68 | S&F 35 mm thick (batten thickness) second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and without sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I) |
| 69 | S&F 100 mm size butt hinges, medium weight , stainless steel complete all as specified and directed |
| 70 | S&F 150 mm size Aluminium handles, cast type, anodised and fixed all as specified and directed. |
| 71 | S&F 200 mm long Aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed. |
| 72 | S&F 75 mm size butt hinges, medium weight , cold rolled, mild steel complete all as specified and directed |
| 73 | S&F 125 mm size Aluminium handles, cast type, anodised and all as specified and directed. |
| 74 | S&F 100 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed. |
| 75 | S&F Aluminium anodised frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc and extra for Powder Coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc and weight of frame not less than 1.60kg/Rm complete all as specified and directed. |
| 76 | S&F Power coated aluminium anodised window and ventilator shutters of any colour (Thickness or powder coating not less than 50 micron). fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading and lucking arrangement, screws and including steel roller etc. complete all as specified |
| 77 | S&F Aluminium anodised grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening and weight not less than 3.4 kg/Sqm, all complete as per requirement and direction of Engineerin-charge. |
| 78 | S&F stainless steel wire cloth 0.36mm nominal dia if wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 79 | S&F 4.00mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane. |
| 80 | S&F 4.00mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed. |
| 81 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 82 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 83 | M&L for preparation of new wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 84 | M&L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 85 | Taking down carefully unserviceable copper/aluminium point wiring of any description (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed. |
| 86 | Dismantling and taking down unserviceable main switches, DBs/metal clad socket etc. any type / size including MCBs and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed by Engrs In Charge. |
| 87 | M&L for point wiring with 1.5 Sq.mm PVC insulated and un-sheathed single core FRLSH copper cable of 1100 volts grade, multi-stranded conductor, drawn through and including PVC casing and capping not less than 20 mm size (medium grade) fixed on surface with all necessary accessories, along with continuous 1.5 Sq.mm PVC insulated FRLSH copper earth wire connected to common earth dolly, including providing and fixing of modular type PVC surface box of suitable size complete with modular frame (grid) and cover plate, making good disturbed surfaces, complete for light/fan/call bell point controlled by one switch, all as specified and as directed. |
| 88 | Description all as per item No 87.00 here-in-before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent boad. |
| 89 | Description all as per item No 87.00 here-in-before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable all as specified and as directed. |
| 90 | S&F Modular switch 1 way 6 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 91 | S&F Socket, 6A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 92 | S&F Socket, 6A/16A-2/3 pin combined ,2 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 93 | S&F Modular switch 1 way 16 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 94 | S&F ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. |
| 95 | S&F lamp holder insulated body with back plate for batten fitting all as specified and as directed. |
| 96 | S&F LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 15W complete all as specified and directed by Engrs In Charge. |
| 97 | S&F LED batten surface / wall mounted with extruded aluminium box type housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) with operating range of 150-270 V AC,complete all as per specified and directed. |
| 98 | S&F LED batten surface / wall mounted with extruded aluminium box type housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10 W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) with operating range of 150-270 V AC,complete all as per specified and directed Engrs In Charge. |
| 99 | S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including G.I pipe bracket ,bracket mounting clamp,bolts and nut etc all as specified and as directed. |
| 100 | S&F recessed type LED Panel Light 600 mm × 600 mm, 36 Watt, suitable for operation on 140–270 V AC supply, complete with powder coated die-cast aluminium housing, high quality glare free diffuser, independent electronic driver duly wired up to terminal block and all fixing accessories. The fitting shall have minimum system efficacy ≥100 lm/W, PF ≥0.90, CRI ≥80, THD ≤10%, IP20 protection, 6500K CCT, beam angle 120°, flicker ≤5%, instant start, low power consumption, inbuilt surge protection ≥3 kV and minimum life ≥35,000 burning hours, complete with internal connections, testing and commissioning in all respects as specified and directed. |
| 101 | S&F LED bulkhead light of 10 W with system efficiency of ≥90 lumens/W, Ingress protection IP 66, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria with range 150-270V AC all as per specified and directed.pressure die-cast housing along with polycarbonate diffuser and LED's IP-65 protction of watt,PF>0.95, complete all as specified and as directed. |
| 102 | M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm medium grade non-metalic PVC casing caping on surface of wall/roof .(Note Three run of 4 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length complete all as specified and directed. |
| 103 | M&L in repairs for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm medium grade non-metalic PVC casing caping on surface of wall/roof .(Note Three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length complete all as specified and directed. |
| 104 | S&F TPN DB with suitable for TPN MCB incomer, double door (IP-43), 4 way, built- in 100 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz, flushed in wall or fixed on surface complete all as specified and directed. |
| 105 | S&F 415V, 10KA 'C' curve miniature circuit breaker (MCB) of TPN 4P , 40 To 63 Amps. capacity in the TPN DB complete with connection testing and commissioning complete all as specified and directed Engrs In Charge. |
| 106 | S&F Sheet metal enclouser Double door(IP-43) SPN DB Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral linkof 8 way 240 Volts AC flushed in wall or fixed on surface complete all as specified and directed. |
| 107 | S&F 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 6-32 Amp rating in the MCB DB including connection, testing and commissioning complete all as specified and as directed Engrs In Charge. |
| 108 | S&F Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 109 | S&F exhaust fan made of sturdy engineering plastic, AC single phase, 230V, of 250 mm sweep, complete with blades, frame and louvers, including all fixing arrangements, wiring connections, etc., including taking down of old/unserviceable exhaust fan and depositing the same to MES Store, complete all as specified and directed. |
| 110 | S&F electric water heater(Geyser), storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc including taking down old u/s Geaser & deposit to MES Store complete all as specified and directed. |
| 111 | Taking down unserviceable electric water heater (Geyser), storage type steel body with copper inner tank upto 25/50/100 litre capacity, repairing the same including replacement/checking of heating element, thermostat, safety valve and internal wiring, refixing in original position, reconnecting water and electrical connections, testing and depositing unserviceable parts to MES Store complete all as specified and directed Engrs In Charge. |
| 112 | S&F modular box type MCB protected socket comprising PVC insulated enclosure with inbuilt plug top and socket, complete with 01 No. SP MCB of 20/25 Amp rating, C curve, suitable for 220–240 Volts AC supply, including making necessary electrical connections, testing and commissioning, complete all as specified and directed by Engrs In Charge. |
| 113 | M&L for in repair earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of soil to a distance n.exc. 50 m and including dismantling of existing earthing complete, necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed. |
| 114 | M&L for taking out old unserviceable UG cable of any size/ type from trenches/ wall/ roof etc. for necessary repair/ replacement/ re-laying works complete all as specified and directed by Engr-in-Charge. Note :- 1. Excavation and earth work should be measured and paid separately. |
| 115 | M&L for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and directed. |
| 116 | Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for LT under ground cable/pole foundation and getting out including forming bottom surface to required level or slope, complete all as specified and directed. |
| 117 | Returning, filling in, including spreading , leveling , watering and well ramming in layer not exceeding 25cm each layer all as specified and directed. |
| 118 | Removing excavated material not exceeding 50M and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed. |
| 119 | Providing sand cushioning to underground cables with a layer of sand 8 cm thick below the cable and 15 cm thick above the cable in trenches,including punning/ramming to achieve a total compacted thickness of 18 cm, complete as specified and as directed . |
| 120 | M&L for providing Sub-Class ‘B’ bricks of standard size for covering of cables, laid dry flat in trenches, complete as specified and as directed. |
| 121 | S&F galvanised steel pipe, light grade, 40 mm dia, laid in trenches or underground/under floor/under road or fixed to pole for protection of cable/earth strip, including clamps with nuts, bolts and washers, complete as specified and as directed . |
| 122 | Excavating in post holes (or similar holes) in loose/soft soil, each not exceeding 0.50 cubic metre, including getting out the excavated material, returning, filling in, and ramming earth or broken rubble mixed with earth in layers not exceeding 25 cm thickness, including disposal of surplus excavated soil to a distance not exceeding 50 metres, and making good the disturbed surfaces, complete all as specified and directed. |
| 123 | M&L for providing and laying plain cement concrete 1:3:6 (Type C2) using 40 mm graded stone aggregate in foundations, filling and mass concrete, including mixing, placing, compacting, levelling, and finishing the surface, complete all as specified and directed. |
| 124 | M&L for removing existing GI tubing and providing & laying new 25 mm nominal bore medium grade GI tubing complete with all necessary fittings such as bends, tees, sockets, unions, clamps and accessories, laid in trenches or fixed on wall with suitable supports, including cutting, threading, jointing, testing and making good, complete in all respects as specified and directed. |
| 125 | M&L for removing existing GI tubing and providing & laying new 20 mm nominal bore medium grade GI tubing complete with all necessary fittings such as bends, tees, sockets, unions, clamps and accessories, laid in trenches or fixed on wall with suitable supports, including cutting, threading, jointing, testing and making good, complete in all respects as specified and directed. |
| 126 | S&F rotational moulded polyethylene water storage tank (vertical cylindrical, closed top) of 1000 litres capacity, including all necessary fittings such as inlet, outlet, overflow, washout pipe, tank nipple, and locking arrangement, complete in all respects, fixed in position including taking down as directed. |
| 127 | M&L for cutting, screwing, threading and fixing of GI tubing of 25 mm and/or 32 mm nominal bore for alterations or additions to existing pipe lines complete in all as specified and directed. |
| 128 | S&F gun metal gate valve with iron wheel head, screwed at both ends suitable for connection with 25 mm nominal bore GI tubing, including jointing, testing and making leak-proof connections, complete in all respects as specified and directed. |
| 129 | S&F gun metal gate valve with iron wheel head, screwed at both ends suitable for connection with 20 mm nominal bore GI tubing, including jointing, testing and making leak-proof connections, complete in all respects as specified and directed. |
| 130 | S&F high-pressure PVC float valve with polythene float and fly nuts, screwed type suitable for connection with iron pipe or PVC ferrule, of 25 mm nominal bore, including making necessary connections, adjustments and testing for proper operation, complete in all respects as specified and directed. |
| 131 | S&F in replacement of angles,flat iron, fixed independently and interconnected with welding work, without the use of connecting plates, cut to required lengths as indicated, for water tank staging or similar structural works, conforming to Fe 410-W (Grade E-250), Quality A steel, including dismantling of old/unserviceable existing staging, complete all as specified and directed. |
| 132 | M&L for preparation of new steel surfaces of any description exceeding 10 cm in width or girth, including cleaning, removing dust, grease, etc., and applying one coat of red oxide zinc chromate primer followed by two coats of synthetic enamel paint of approved colour and make, complete all as specified and directed. |
| 133 | M&L for providing hardcore of gauge n exc 63mm,deposited ,spread and levelled in layers n exc 20 cm thick,watered and rolled/rammed to a true surface including filling of moorum/red bajri all as specified and as directed. |
| 134 | M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces,rendering finished even and smooth (Without using extra cement ) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 135 | M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces,rendering finished even and smooth (Without using extra cement ) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender