Defence Statutory Bodies & Commissions/Committees Closing in 5 days TDR #58406985

Tender For Periodical Services Of Md Accn Of Dad At New Cantt Prayagraj

Issued by Statutory Bodies & Commissions/Committees · Prayagraj, Uttar Pradesh
Tender Value
49.98 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
5 days left
EMD
99960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Periodical Services Of Md Accn Of Dad At New Cantt Prayagraj

BOQ

Name of Work:- PERIODICAL SERVICES OF MD ACCN OF DAD AT NEW CANTT PRAYAGRAJ
Sl. No. Item Description
1Taking down cement or cement lime plaster, grit plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water including removing of debries out side of MOD land complete all as specified and directed.
2Demolition of brick work or stone/boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facing, dressed stone work and precast concrete articles etc. complete all as specified and directed.
3M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.
4M&L for 15mm thick rendering in CM (1:3) on edges of RCC chajja or corners of columns where steel reinforcement coming out after fixing 15mm size wire netting of mild steel wire 1.60mm dia fixed with tinned tacks of wire staples including taking down of plaster, complete all as specified and as directed.
5M&L rendering 15mm thick in cm 1:4 fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and as directed.
6M&L rendering 15mm thick in cm 1:6 on on other than fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and as directed.
7M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surface of ceiling and finished surface even and smooth without using extra cement complete all as specified and directed.
8S&F for mild steel chicken wire mesh of size 12.5mm x 0.51mm (24 SWG) hexagonal construction, stretched firmly before plastering complete all as specified and directed.
9M&L for preparation of newly plastered surfaces of wall and applying two or more coats of Acrylic Smooth exterior paint of required shade applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete all as specified and directed.
10M&L for two coats of oil bound distemper over chalk whiting on newly plastered surface of wall and cornices including preparation of surfaces complete all as specified and directed.
11M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.
12M&L for 1 mm thick wall care putty on external and internal wall over newly plastered / old decorated surfaces complete all as specified and directed.
13M&L for preparing plastered or unplastered old decorated surfaces of ceiling and applying one coat of white wash on ceiling surfaces complete all as specified and directed.
14M&L for preparing plastered or unplastered old decorated surfaces of Ceiling and applying one coat of oil bound distemper on Ceiling surfaces complete all as specified and directed.
15M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.
16M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying two coat of oil bound distemper complete all as specified and directed.
17M&L for complete removal of existing treatment of wall and applying two coat oil bound distemper over a one coat of primer complete all as specified and directed.
18M&L for preparing old painted surfaces of wood or wood base materials of any description not otherwise described, surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
19M&L for preparing old painted surfaces of wood or wood base materials of any description not otherwise described, surfaces exceeding 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
20M&L for preparing old painted surfaces of steel of any description not otherwise described, surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
21M&L for preparing old painted surfaces of steel of any description not otherwise described, surfaces exc 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
22M&L for old decorated plastered or unplastered surfaces of walls and applying two coats of Cement Base Paint white or tinted of approved shade over a coat of alkali resistant primer complete all as specified and directed.
23M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of Cement Base Paint white or tinted of approved shade complete all as specified and directed.
24M&L for complete removal of existing treatment of wall and applying two coats of Acrylic Smooth exterior paint of required shade applied @ 1.43 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete all as specified and directed.
25M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of Acrylic Smooth exterior paint of required shade complete all as specified and directed.
26S&F in repair sheet glass 4mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
27S&F in repair figured glass 4mm thick pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.
28M&L for complete removal of existing treatment of wall and applying two coats of plastic emulsion paint of required shade, smooth finish over and including priming coat of primer complete all as specified and directed.
29M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying two coats of plastic emulsion paint of required shade, smooth finish complete all as specified and directed.
30M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coats of plastic emulsion paint of required shade, smooth finish complete all as specified and directed.
31M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing old surfaces of wood or wood base materials and applying one or more coats complete all as specified and directed.
32M&L preparation of existing new or old plaster surfaces including removal of existing treatment and applying two coat of Dr. fixit sure ceal damp proof chemical or Smartcare hydroloc water proofing of make Asian on plaster surfaces complete all as specified by the manufacturer.
33Demolition and breaking up (salt glazed ware, AC, PVC) drain pipes of any dia set in cement mortar complete.
34S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed.
35S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed.
36S&F in repair PVC (SWR) bend with oval access door any radius suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed.
37S&F in repair PVC (SWR) branch piece, single (Y or T) equal or unequal with oval access door suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed.
38S&F in repair PVC (SWR) branch piece, double (Y or T) equal or unequal with oval access door suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed.
39S&F in repair PVC (SWR) bend any radius suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed.
40S&F in repair PVC (SWR) branch piece, single (single Y or T) equal or unequal suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed.
41S&F in repair rotational moulded,multilayer HDPE water storage tank (white colour) of 500 ltrs capacity (cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20mm dia PTMT float valve epoxy coated aluminium rod with high density plastic float ball (of minium weight 210 grams) and refixing of inlet, outlet & overflow pipe etc, as per IS-12701), complete all as specified and as directed.
42S&F in repair PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 25mm bore pipe (minimum weight 455 grams) complete all as specified and directed.
43S&F PVC tank cover/lid for 500/1000/2000 Ltrs over head tank complete including fixing the lid with the existing tank with PVC hinges and male and female locking system all as specified and directed
44S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor incl taking up or down old steel tubing and connections and removing to store or removing from site complete all as specified and directed.
45S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor including taking up or down old steel tubing and connections and removing to store or removing from site complete all as specified and directed.
46Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15mm dia including taking up or down old steel tubing and connections and cleaning for refixing complete all as specified and directed.
47Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 20mm dia including taking up or down old steel tubing and connections and cleaning for refixing complete all as specified and directed.
48S&F in repair 20mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
49M&L for dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified & directed.
50M&L mild steel framed work such as grills, grates etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, framed and hung as gates including pintle hinges, stops, hand made sliding bolts, expanded metal (work to be executed any height) etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
51Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in RCC water tanks, roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
52Removing of surplus excavated/demolised materilas to a distance exceeding 50 mtrs and not exceeding 1.5 Km away complete all as specified and directed.Note: Demolished material should not be thrown away on the ground from the top of roof, it should be removed from the roof by manually or by any mechanical means
53M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed.
54Schedule of Credit (MINUS) Rs. 18,921.00 B/F from Serial Page No. ____ [Note : Details of items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58406985
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 49.98 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Periodical Services Of Md Accn Of Dad At New Cantt Prayagraj
Basic Detail
Tender No 8984/E8
Bidding Type Tender
Location
City Prayagraj
State Uttar Pradesh
Key Dates
Publish Date 06 Nov 2026
Submission Date 27 Nov 2026
Open Date 04 Dec 2026
Finance
Tender Value 49.98 Lakhs
Tender Fee 500
EMD 99960
Exemption Available
Document List
160bc7e9-ad4a-4af3-9130-9dedab3fb318.html
BOQ_894695.xls
TenderDocus8984.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

160bc7e9-ad4a-4af3-9130-9dedab3fb318.html

xls

BOQ_894695.xls

pdf

TenderDocus8984.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender