Housing Urban and Rular Development Government Departments Closing in 6 days TDR #58406880

Tender For Construction Of 2X35m Span Bridge At Nallah Kishanganga Near Basti Badwan Gurez

Issued by Government Departments · Bandipora, Jammu and Kashmir
Tender Value
5.84 Crore
Estimated cost
Bid Submission
25 Nov 2026
6 days left
EMD
11.68 Lakhs
Bank guarantee accepted
Document Fee
7100
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipora → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of 2X35m Span Bridge At Nallah Kishanganga Near Basti Badwan Gurez

BOQ

Name of Work:- Construction of 2x35M Span Bridge at Nallah Kishanganga near Basti Badwan Gurez
Sl. No. Item Description
1Sub Structure.Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :
2Ordinary Rock.
3Dewatering of Trenches by Pumping out Abuts 2nos and pier one number complete job.
4Extra for additional lifts of 1.5 m or part theirof in excavation /banking excavated or stacked materials .All kinds of soil.
5Providing and laying of broken stone layer under mud mat of foundation rafts of abuts including all carriage complete job.
6Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) using Nallah aggregates.Complete job.
7Providing and laying in Position specified grade of reinforced cement concrete M-30 mix including all carriages complete job.
8Centering and shuttering including strutting, propping etc. and removal of form for :- Foundation,Columns, pillars, piers, abutments, posts and struts.
9Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
10Providing and filling of RBM on the back of abuts in layers of 250mm thickness and consolidation of each layer by 8-12 ton road roller upto the required height viz soffit of the approach slab including all carriage complete job.
11Construction of Diversion with 900 mm dia triple row pipes 3 each and RBM inclding maintenance for whole operational time complete job.
12Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.
13Approaches.Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :
14Providing and laying stone soling including compacting,watering,etc.including all carriage complete job.
15Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
16Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
17Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
18Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
19Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Nallah .
20Dry random rubble masonry with hard stone in foundation & plinth without bond stones. Nallah stones
21Supply and filling of Boulders/RBM in approach road behind R/Wall as filter media including consolidation and all carriages and headloads involved upto site of work complete job.Available material 20%.
22New quantity 80% including all sorts of carriage complete job.
23Providing and Laying of 900mm RCC Pipes incl.all carriage upto site of work complete job.
24Carriage of materials from source to road site of work by mechanical transport including loading, unloading and stacking complete.Stones avg.lead of 15 kms.
25Stone Aggregates 40/20mm nominal size. avg.lead of 140 kms.
26Sand avg.lead of 15 kms.
27Cement avg.lead of 105 kms.
28Approach Road.Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil .
29Preparation of Sub Grade by excavating to an average of 22.5cm depth dressing to camber and consolidation with road roller including making good the undulations etc.and disposal of surplus earth within 50mtr.
30Supplying,spreading and consolidation of GSB in two layers total thickness of two layers 200mm consolidation of each layer separately by 8-10ton power roller including all carriage complete job.
31Supplying and stacking at site Graded crushed stone aggregate of size 63 mm to 45 mm.
3253 mm to 22.4 mm.
33Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
34Carriage of materials from source to road site of work by mechanical transport including loading, unloading and stacking complete.Graded crushed Stone aggregate avg.lead of 15 kms.
35Crate Work.Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :
36Providing and fixing Hand packed stones/boulders in G.I wire Crates 4mm dia,100mmx100mm mesh(woven diagonally)including Tipping stone filled wire crates in position with necessary equipment charges incl.cost and carriage ,headload of the stones and wire crates with all leads ,lifts,loading,unloading carriage of wire crates upto site of work complete job.
37Backfilling available RBM/Boulders behind crate walls all complete job.
38Super-Structure.Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded
39Supply,Fabrication and installation of metal bearing components made from high-quality structural steel,including cutting,shaping,drilling,welding and finishings as per approved drawings and specifications.the work includes proper alignment ,fitting and placement at designated locations,complete with necessary bolts ,nuts,washers and anchoring arrangements.
40Finishing with Epoxy enamel paint (two or more coats)at all locations prepared and applied as per manufactures,prepration of surface etc. Complete On Steel Work. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58406880
AUTHORITY Government Departments
TENDER VALUE 5.84 Crore
LAST DATE 25-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Construction Of 2X35m Span Bridge At Nallah Kishanganga Near Basti Badwan Gurez
Basic Detail
Tender No E-NIT No-77 of 2026-27 EE-RnB-Grz-8988-8994 E-tendering Dated-05-11-2026
Bidding Type Tender
Location
City Bandipora
State Jammu and Kashmir
Key Dates
Publish Date 06 Nov 2026
Submission Date 25 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 5.84 Crore
Tender Fee 7100
EMD 11.68 Lakhs
Exemption Not Available
Document List
BOQ_1121221.xls
f636e2cb-56ab-425b-9b36-3e1dbb483d41.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1121221.xls

html

f636e2cb-56ab-425b-9b36-3e1dbb483d41.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender