Housing Urban and Rular Development Government Departments Closing in 0 days TDR #58406870

Tender For Construction Of Middle School Satni Nalah (Building Less Upper Primary)

Issued by Government Departments · Bandipora, Jammu and Kashmir
Tender Value
45.33 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
0 days left
EMD
90660
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipora → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Middle School Satni Nalah (Building Less Upper Primary)

BOQ

Name of Work:- Construction of Middle School Satni Nalah (Building Less Upper Primary)
Sl. No. Item Description
1Clearing of site of construction / Levelling of ground and surface dressing with Manual Labours by demolishing/removing old existing damaged platform/plinth partly in stones masonary and partly earthen and small damaged structure (of size 14'x12'x 6') incl. removing of inequalities and stacking of serviceable material and disposal of unserviceable material/ rubbish.all complete job as per directions of Engineer-in-Charge.
2Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed.All kinds of soil :
3Providing and laying Stone solling in Foundation trenches / inside plinth including compacting, watering Including cost of carrriage and head loads . Etc complete .
4Available at site.
5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 aggregate 40mm nominal) Nallah aggregates
6Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 aggregate 20 mm nominal size) Nallah aggregates.
7Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: in 1:3:6 (1 Cement : 3 coarse sand : 6 aggregate 40 mm nominal size ) Nallah aggregates.
8Reinforced Cement Concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 ( 1cement : 1.5 coarse sand : 3 stone aggregate of 20mm normal size aggregate. Nallah aggregates.
9Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand).
10Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level
11Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately.KD wood.incl. cost of carriage and head load complete.
12Providing and fixing flat iron hold fast including fixing of frames with nuts and bolts/Nails.Including carrriage complete .
13Centering and shuttering including strutting propping etc. removal of form work. Foundations, footings, bases of columns etc.
14Lintel, beams, plinth beams, girders, bressumers and cantilevers.
15Edge of slab
16Suspended floors, roofs, landings, balconies and access platforms.
17Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
18Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded
19Providing colour coated high Rib color coates GS sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers file with white lead and including Ridges and valleys all complete job (upto a pitch of 60 degrees), excluding the cost of purlins, rafters and trusses.0.50mm thick . incl. all carriages and head load of material involved complete job.
2012mm thick cement Plaster in 1:6 (1 cement: 6 Sand) mix.
21Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate
22Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings. incl. carriage and head load complete.
23Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.5 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm KD wood. Incl. carriage and head load complete.
24Providing and fixing panelled shutters for doors, windows and clerestory windows including Panelling of Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws complete job. 30mm KD wood. incl. carriage and head load complete.
25Providing/fixing 3.5mm thick glass panes.Including beading, nails and cost of carrriage complete .
26Providing and fixing hardware fittings of approved brand and of required type as approved by Engineer incharge. complete as per the specifications . (Anodized Aluminium fittings)Tower Bolt 100 mm
27Tower Bolt 150 mm
28Handle 125 mm
29Handle 150 mm'
30150 mm hook and eyes
31L-DROPS
32Finishing walls with water proofing cement paint of approved brand and manufacture & of required shade to give an even shade New work (two or more coats)[email protected]/10sqm.
33Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
34Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
35Providing & Fixing C.P. sink mixer of approved make including cutting and making good the walls wherever required. Jaquar make
36Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shad. 16mm
37Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink without drain board. 610x510mm bowl depth 200mm
38Filling available excavated earth in trenches , plinths , sides of foundation etc . In layers not exceding 20cm in depth consolidating each layer by ramming and watering lead upto 50m lift upto 1.50m
39Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm
40Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete
41Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
42Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
43Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm. complete
44CERAMIC GLAZED TILESProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
45Carriage of materails By Mech.Transport, from source to site of work incl. loading, unloading and stacking of materials at site of work.Sand for an avg lead of 15 km
46'Stone agg. for an avg lead of 15 km
47Cement/Steel for an avg lead of 25 km
48Bricks for an avg lead of 185 km
49Carriage of materails By Manual Transport/Head Load, upto site of work incl. loading, unloading and stacking of materials at site of work.(Avg. Head Load of 1.0 km) (Subjected to Actual to be paid at the time of execution) Sand for an avg lead of 1000mtr.
50'Stone agg. for an avg lead of 1000 mtr
51Cement for an avg lead of 1000 mtr
52Steel for an avg lead of 1000 mtr
53Bricks for an avg lead of 1000 mtr
54SEPTIC AND SOAKAGE PIT INCULDING FITTINGS AND FIXTURES FOR WASHROOM/KitchenEarth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
55Providing /laying of stone soling handpacked in foundation trenches including dressing, watering, compacting and all carriage up to site of work complete job
56Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering: All work upto plinth level in 1:4:8 ( 1 cement : 4 coarse sand : 8 graded crushed stone aggregate 40 mm nominal size) Nallah aggregates
57Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation & plinth in cement mortar 1:6 (1 Cement : 6 coarse sand)
58Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). Nallah Aggregates
59Centring and shuttering including strutting, propping etc and removal of formwork for Suspended floors, roofs, landings, balconies and access platforms.
60Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
61Dry random rubble masonry with hard stone in foundation & plinth without bond stones. Nallah stones
62Available at site
6312mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand).
64Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate. Nallah Aggregates
65Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) complete as per standard design Inside size 45x45 cm and 45 cm deep including cover with frame (light duty) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. COMPLETE JOB
66Providing and fixing of RCC Man hole cover with frame of size 450mmx450mm of approved quality and make complete.
67Carriage of materails By Mech.Transport, from source to site of work incl. loading, unloading and stacking of materials at site of work.Sand/ aggregates for an avg. lead of 15 Kms.
68Bricks for an avg. lead of 185 Kms
69Stones for an avg. lead of 10 Kms
70Cement/ Steel for an avg. lead of 25 km
71Carriage of materails By Manual Transport/Head Load, upto site of work incl. loading, unloading and stacking of materials at site of work.(Avg. Head Load of 1.0 km). (Subjected to Actual to be paid at the time of execution)Sand/ stone agg. (1000mtr)
72Bricks
73Stones
74Cement/steel
75Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
76Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
77Providing & Fixing C.P. wall mixer of approved makeincluding cutting and making good the walls wherever required.. Jaquar or equivalent make
78Providing & Fixing C.P. tubes of approved make 450mm to 600mm long
79Providing and fixing of soap case of standard quality and make.
80Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: (600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.)
81Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality and make conforming to IS : 8931. jaquar or eqvivalent make
82Providing and fixing of cockrach type CP grating of standard quality and make 100mm
83Providing and fixing angle value for all points of standard quality and make including all accessories complete job. Jaquar or equivalent make.
84Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm
85Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls wherever required etc. (Type B-Medium)15mm Nominal Bore
8620mm Nominal Bore
87Providing and fixing P.V.C. pipe and pipe fittings of the following nominal dia to P.V.C. Soil/Waste/Ventilating pipes,P/F PVC Door Tee 100mm dia of approved make type B
88P/F PVC bend 100mm dia of approved make type B
89P/F PVC Collar 100mm dia of approved make type B
90P/F PVC bend 75mm dia of approved make type B
91P/F PVC Collar 75mm dia of approved make type B
92P/F PVC pipe 100mm dia of approved make Type B
93P/F PVC pipe 75mm dia of approved make Type B
94P/F PVC pipe 40 mm dia of approved make Type B
95P/F PVC cowel over vent pipe of approved quality type B
96P/F PVC Reducer 100x75 mm of approved quality type B
97P/F Ms/pvc stays and clamps for PVC pipe.
98P/F PVC floor traps 100 mm complete job
99P/F gun metal ball valve of approved quality 20 mm nominal dia
100P/F gun metal ball valve of approved quality 15 mm nominal dia
101ElectrificationWiring for light point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Finolex/ Anchor/eq. standard make as desired by engineer incharge) single core cable in surface / recessed medium class PVC conduit, with modular switch ( Legrand Mylinc /SSK NV/Schneider Livia /ABB Tvisha make), modular plate, suitable GI box,Junctions etc.
102Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS PVC insulated copper conductor ( Havell/Polycab/ Finolex/Anchor/ equivalent as directed by engineer incharge), single core cable in surface/recessed medium class PVC conduit.
103Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A, 15/16 A modular socket outlet and 15/16 A modular switch, modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/Schneider Levia /ABB Tvisha make).
104Wiring for lighting circuits/ inverter circuits/ 6- 10 amp power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Finolex/Anchor/ equivalent as directed by engineer incharge ), single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
105Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/Schneider Livia /ABB Tvisha make.)
106Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
107Supply installation testing and commissioning of Indicator of Anchor roma plus/Legrand Mylinc /SSK NV/Schneider Livia /Crabtree athena make.
108Supply fixing, testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block and 15 watt LED lamp, Philips/Trulux/Wipro make / sample to be approved before installation.
109Supply, Installation, Testing and Commissioning of 1200 mm sweep ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2 nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including Fan Junction complete. USHA /Havells /Crompton make, sample to be approved before installation.
110Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with indicator plate Anchor roma plus/Legrand Mylinc /ABB Tvisha/schneider Livia/Havell Coral make.
111S/F testing and comm. Of MCB's 10 K of the below mentioned capacities in sub main controls ABB SB200/Legrand Dx3/Siemens Betaguard/ Schneider Acti 9/equivalent make as directed by engineer incharge . 6-32 Amp SP MCB
11240-63amp DP MCB
113Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, ( Havell/ legrand/ Shinider/SSK make) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/isolator) 14 way, Double door
114Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block.
115S/L , testing and commissioning of, XLPE Insulated, PVC aluminium cable ( unarmoured) 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. 16 sq.mm 2 core Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58406870
AUTHORITY Government Departments
TENDER VALUE 45.33 Lakhs
LAST DATE 17-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Construction Of Middle School Satni Nalah (Building Less Upper Primary)
Basic Detail
Tender No Fresh (RnB) E-NIT No 78 of 2026-27 EE-RnB-Grz-9005-11 E-tendering Dated-05-11-2026
Bidding Type Tender
Location
City Bandipora
State Jammu and Kashmir
Key Dates
Publish Date 06 Nov 2026
Submission Date 17 Nov 2026
Open Date 18 Nov 2026
Finance
Tender Value 45.33 Lakhs
Tender Fee 1100
EMD 90660
Exemption Not Available
Document List
97c3e9d6-d4b7-4aa1-a98f-b1f056d3b994.html
BOQ_1121231.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 17, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 18, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

97c3e9d6-d4b7-4aa1-a98f-b1f056d3b994.html

xls

BOQ_1121231.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender