Housing Urban and Rular Development Government Departments Closing in 7 days TDR #58406684

Tender For Construction Of Additional Sixth Floor In The Existing Maternal And Child Health Special Care Centre (G+5 Floors) Building In Government Medical College Hospital Campus At Thiruvallur In Thiruvallur District.

Issued by Government Departments · Thiruvallur, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Nov 2026
7 days left
EMD
3.68 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Additional Sixth Floor In The Existing Maternal And Child Health Special Care Centre (G+5 Floors) Building In Government Medical College Hospital Campus At Thiruvallur In Thiruvallur District.

BOQ

Name of Work:- CONSTRUCTION OF ADDITIONAL SIXTH FLOOR IN THE EXISTING MATERNAL AND CHILD HEALTH SPECIAL CARE CENTRE (G+5 FLOORS) BUILDING IN GOVERNMENT MEDICAL COLLEGE HOSPITAL CAMPUS AT THIRUVALLUR IN THIRUVALLUR DISTRICT.
Sl. No. Item Description
1Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls
2Brick / stone masonry in Cement mortar walls under 3m high
3Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness
4Dismantling RCC by manual / by using deploying machineries
5Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness
6Dismantling plain Cement concrete
7Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness
8Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs.
9Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers
10Supplying and filling in foundation, basement, etc with filling Crushed Stone sand in layers of not more than 15cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
11Supplying and filling in foundation, basement, etc with Stone Dust in layers of not more than 15cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
12Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.
13Supply and filling in foundation and basement with Gravel in layers of not more than 15cm thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
14Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification.
15Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).
16Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals. MS Channel Section (ISMC 100) shall be provided as a vertical support @1.20m C/C and with Lateral support of Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) & steel pipes of 20mm dia @ required level/spacing etc. complete complying with standard specifcation and as directed by the departmental officers. (Payment for centering shall be given after the concrete is laid)
17Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
18Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
19Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c, etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
20Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part there of but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.
21Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
22For Foundation and Basement.
23Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
24For Sixth Floor
25For Seventh Floor
26Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)
27For Foundation and Basement
28Sixth Floor
29Seventh Floor
30Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 9\\" x 4 3/8\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. In Cement Mortar 1:5
31For Foundation and Basement
32Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 9\\" x 4 3/8\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. Cement Mortar 1:6
33For Sixth Floor
34For Seventh Floor
35Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9\\" x 4 3/8\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
36For Sixth Floor
37Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.
38For Seventh Floor
39Paving the Top of roof with Solar refelective ceramic tiles of 305mm x 305mm x 7mm thick approved quality and colour laid in Cement mortar bed in 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with water resistant tile epoxy grout for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)
40Lime Concrete 1:2:5 (One lime, two sand and five brick jelly ) using 40mm gauge brick jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor finish, curing, etc. complete complying with standard specification.(For flooring in toilet portioins except water closet portions)
41Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used, hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.
42Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.
43Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (water proof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. (The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (water proof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coats of putty, scrapping the putty area to level the surface smooth, etc.,complete. The putty should be got approved by the Executive Engineer before use on work.
44Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers. (The wall putty shall be got approved by the Executive Engineer before use of work).
45Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers.
46Providing, mixing, laying polymer based water proofing treatment for the Sunken Toilet / Lift well/ OHT Rcc wall by applying cement based, flexible, waterproofing compound confirming to IS:2645, to a thickness of 1mm of the prepared surface of the roof slab / floor slab as per specifications mentioned above providing cement mortar 1:3, waterproofing cover plaster to a thickness of 12mm over the membrane coating with admixture of approved make. Rate quoted is inclusive of preparation of surface, which includes cleaning of surface polymer mortar curing, labour, tools and equipment, etc. Rate inclusive of grouting with cement and sand required for the treatment, the cost and labour charges for fixing 25mm dia pressure pipes 15kg/cm2 to a length of 45cm for drip pipes, etc. complete.
47Paving the floor with best quality vitrified Tiles of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
48Double charged Vitrified Tiles 1200x600x8mm
49Flooring with ceramic tiles of following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
50Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm
51Paving the floor with best approved quality fine polished Granite Stone Slabs of following size and Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)
52Flamed Ruby Red Granite Slab1200mm x 600mm, 16mm to 18mm Thick
53Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
54Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
55Dadooing with printed design colour glazed tiles of size 300mm x 450mm x 8mm
56Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
57Dadooing walls with best quality Vitrified Tiles 600 x 600 x 8mm
58Nosing to the granite slabs by cutting the granite slabs of 18mm to 20 mm thick edges and makeing semicircular shape to required size and nosing with semicircular shape and polishing using hand machine and the nosing with semicirular shape and polishing with hand machine and the nosing is made highly smooth and gloosy, the cost includes labour charged and cost of machineries and polishing charges etc., a.) Single Nosing
59Supplying and laying hydraulic pressed monolithic natural grey colour cement concrete inter locking paver block of 63mm thick, in cement concrete 1:2:4 (one cement, two sand, four aggregate) using difference design and with stand for pressure of 150 - 200 kg/m2 over the existing sand cushion by using earth rambers and also vibratting the concrete blocks often laying using plate vibrators etc, complete as directed by the departmental officers.
60Supplying and fixing fine polished cuddapah slab of 38 / 40mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as directed by the departmental officers.
61Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers.
6250mm thick slab (using 20mm HBGS Jelly)
63Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.ixing etc., complete. complying with standard specification.
64Supplying, Fabricating, erecting and fixing Hilux (or) equivalent Gyp Board FALSE CELING upto a ceiling height of 4.50 m from floor level using Hilux board Perforated sheet 10mm thick which includes shaped GI channels of size 25 x 25 x 0.50 mm thick suspended from ceilling at 1.2 m both longitudinal and cross vertical support and fixing shaped GI channels of size 50 x 30 x 0.50 mm and 150 x 10 x 0.50 mm thick at 0.60m centre longitudinal and cross difrection for vertical supports and fixing U shaped GI channels of size 50 x 30 x 0.50 mm thick and 50 x 10 x 0.50 mm thick at 0.60 m centre to centre in cross direction and respectively for horizantal supports of zig - zag pattern and fixing of Gyp board in the panel provided in the desing pattern given and sprating the standard spection and as directed by the departmental officers. The rate shall be inclusive of finishing the edges and wall junctions with suitable lipping and cornice arrangements.
65Hydraulic Door closer of various sizes of approved quality using Aluminium Extruded section body tubular type universal hydraulic door closer with double speed adjustment like HARDWYN (make) 'GAZEL' (or) equivalent (with ISI Monogram)
66Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m, Centre mullions: 63.50x38x3mm@ 1.55 kg/m, Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column, masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.
67Supplying and fixing the damaged Aluminium Grill of standard pattern (diamond shape) - 10mm thick including 'F' (or) 'H' Section etc., complete complying with standard specification.
68Manufacturing supplying and fixing of Fully Panelled steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. - Single leaf
69Openable UPVC Window With Grill & Fly Mesh :Supply and fixing of UPVC (Un plasticised Polyvinayl chloride) windows made of UPVC profile section having profile size of 74x60x56 mm having outer wall thicknessof 2.30mm (+/-0.3 mm) with 3 box multi-chamber hollow construction.The shutterof casement window shall be made of 74x50x36 mm having outer wall thicknessof 2.30mm (+/-0.3 mm) and the fixed mullion of size 72x60x36 mm having outer wall thicknessof 2.30mm (+/-0.3 mm). The shutter will be provided with suitable UPVC Beds of size 25x16 mm for glazing for the specified/required glass(single).All profiles of frames,Sash,and Muillion shall be reinforced with galvanised mild steel sectionof 1.2 mm wall thickness,at wherever required.The window shall have SS304 grade friction hinge for Anti rust feature. Windows has to be provided with varitey of security devise like mutipoint lock systems and powder coated handles as per the requirement compliant with relevant specification the window shall have 5 mm thick single glass and the colour shall be as directed by the department personal.The window system shall have the SPACE to fix the grill with in the outer frame and which id made of 10 mm square are bright rod asper your approved design fix in the outer frame with self tapping screws.Over the outer frame of the window,the sash for fly meshof UPVC Profilewith dimension45x41,will be fixed with butt hinge,The shutter can be opened inward in the building with the help of a handle.The mesh will be fixed in the sash with EPDM Gasketto hold firm.The mesh will be SS with 0.28 mm thick dia.All the corners and mullion joints of the frame & sash shall be mitred cut & Fushion welded without any Mechanical joint.All welded jointsare to be neathly trimmed & Feature grooved nib finish so as to make the finished products free from sharp all edges.All profiles in the window must be duly cut at correct degree & fitted with necessary EPDM Wheather sealed gaskets.The complete Window shall be fixed into the prefinished opened places,by drilling & Fixing through the outer frame using high quality fasterners & Sillicon sealent is applied to fiil up the gap betweeen wall & Window frame for Leak proof installation,and Completion
70Stainless Steel (Salem Stainless Steel) Door Frame - Box Section using Stainless Steel Plate with 1mm thickness with the size of 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel Hold fast etc including dismantling,making necessary chipping and holes in RCC columns, walls with power drills to the extent required ,including providing concrete 1:2:4 inside the box curing etc complete complying with standard specification and as directed by the departmental officers - SS Door Frame with thickness of 1mm
71Supplying and fixing solid core flush shutter of following type with thickness with necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 6 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm), 3 Nos. 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - Double leaf.
72Supplying and fixing solid core flush shutter of following type with thickness with necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 3 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm), 2 Nos 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - Single leaf.
73Providing WPC Frame with door shutter. Door frame of size 0.10x0.07m and shutter 25mm thick, including fixing labour charges and furniture fittings, such as 4 nos 4'' butt hinges, 2nos 6'' brass tower bolts, 2nos 4'' handle, door stoper incliding cost of labour for fixing charges, transportation charges etc., complete.
74Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations free pin headed glass 4mm thick should be provided in the louvers. The Ventilators should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
75Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Each., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete.Aluminium sections, and furniture fittings shall be got approved by the Executive Engineer incharge.
76Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.
77Painting Old Plastered Wall Surface with Two finishing coats of ready mixed Exterior (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
78Painting Old Plastered Wall Surface with Two finishing coats of ready mixed Interior (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
79Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.
80Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.
81Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Three coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
82Varnising the wood work with two coats of best melamine varnish of approved quality and brand including prepartion of surface etc., The rate is inclusive the cost of all materials, labour charges and finishing neatly etc., complete Complying with standard specification and as directed by the Departmental Officers.
83Supplying and fixing of Terracotta jally of size 200x200x 75mm thick in in position but including moulding charges, casting of jally, finishing curing and fixing the jolly in position and pointing the joints with cement mortar 1:2 to full depth in all floors etc., complete complying with standard specification.
84Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
85Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete
86Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the departmental officers.
87160 mm dia PVC pipe
88110 mm dia PVC pipe
89Supplying and fixing in position best quality and approved make Indian made white glazed earthenware Oval type wash hand basin of size 560 mm X 470 mm without pedestal with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
90Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm ( without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
91Supplying and fixing in position best quality Stainless Steel sink of 600 x450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]
92Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)
93Supplying and fixing in position Health faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works).
94Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
95Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as di- rected by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).
96Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
97Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
98Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply - Below ground level.
9940mm dia.
100Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply - Above ground level
10140mm dia.
10232mm dia.
103Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - Internal water supply above ground level.
10425mm dia.
10520mm dia.
106Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements.
10740mm dia Union
10832mm dia Union
10925mm dia Union
11040mm dia. Elbow
11132mm dia Elbow
11225mm dia Elbow
11320mm dia Elbow
11440mm dia Bend
11532mm dia Bend
11625mm dia Bend
11720mm dia Bend
11840mm dia TEE
11932mm dia TEE
12025mm dia TEE
12120mm dia TEE
12240mm x 32mm dia Reducer Elbow
12332mm x 25mm dia Reducer Elbow
12425mm x 20mm dia Reducer Elbow
12540mm x 32mm dia Reducer Tee
12632mm x 25mm dia Reducer Tee
12725mm x 20mm dia Reducer Tee
12840mm x 32mmdia Reducer
12932mm x 25mmdia Reducer
13025mm x 20mmdia Reducer
13120mm x 15mmdia Reducer
132Supplying and fixing in position 15mm dia brass CP screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
133Supplying and fixing in position SS Elbow Action Tap of size 15mm of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works).
134Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
13540mm dia.- gate valve.
13632mm dia.- gate valve.
13725mm dia.- gate valve.
138Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications
139Supplying, fixing of cylindrical vertical notational polythene water storage tank of 2000 litres capacity confirming to I S. 12701 / 96. the tank is meant for outer (or) indoor, use complete with removable hinged top locking arrangements and to make provision to fix with simply pipe lines necessary manhole with cover and including all PVC specials, plugs, screws, nails to fix the tank etc., and the tank should be fixed firmly as directed. The rate shall inclusive of all materials labour, conveyance, hoistings and fixing charges etc., (The water tank should be got approved by the Executive Engineer before use on works by the dept., Officers.
140Supplying, fixing of cylindrical vertical notational polythene water storage tank of 10000 litres capacity confirming to I S. 12701 / 96. the tank is meant for outer (or) indoor, use complete with removable hinged top locking arrangements and to make provision to fix with simply pipe lines necessary manhole with cover and including all PVC specials, plugs, screws, nails to fix the tank etc., and the tank should be fixed firmly as directed. The rate shall inclusive of all materials labour, conveyance, hoistings and fixing charges etc., (The water tank should be got approved by the Executive Engineer before use on works by the dept., Officers.
141Supplying and fixing position CI Nahani Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works).
142Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
143160 mm PVC pipe
144110 mm PVC pipe
14575 mm PVC pipe
146Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re- doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
147160mm dia PVC door Y
148160mm dia PVC door Elbow
149160mm dia PVC door Tee
150110mm dia PVC Elbow
151110mm dia PVC Plain bend
152110mm dia PVC Door Elbow
153110mm dia PVC Door tee
154110mm dia PVC cowl
155110mm dia PVC Plain tee
156110mm dia PVC single Y junction
157110mm dia PVC double Y junction
15875mm dia PVC Elbow
15975mm dia PVC Plain bend
16075mm dia PVC Plain tee
16175mm dia PVC single Y junction
16275mm dia PVC double Y junction
16375mm dia PVC Door tee
16475mm dia PVC cowl
165Providing rain water recharging collection pit having a size of 900mm dia to a total height of 1200mm is 150mm above ground level and 1050mm below ground level with necessary augar bore of 300mm dia to a depth of 3000mm from bottom level of collection pit and filled with 20mm HBG stone jelly inside of augar bore. The sides of collection pit provided with RCC Well ring of inner size of 900mm x 300mm x 50mm with 6mm reinforcement on both direction at 200 mm c/c using RCC 1:1/2:3 (one cement, one and half sand and three HBG jelly). The top of collection pit is finished with 50mm thick cover slab, The collection pit is filled with course river sand at top, 20mm HBG stone jelly at middle and 40mm HBG stone jelly at bottom of a depth of 300mm, 450mm and 450mm respectively. The rate is including the cost of RCC well ring and filling materials, RCC cover slab, drilling hole and labour charges for erecting the well ring etc., and as directed by the departmental officers.
166Supplying and erecting Safety Scaffolding arrangement using Cup-lock system, having a standard width of 1.20m, provided for working platform in the peripheral area of the high rise building. The Safety Scaffolding arrangement shall be formed by using vertical hot rolled steel pipe of 40mm diameter with a thickness of 2.90mm. The vertical pipe shall have a steel cup arrangement of 80mm diameter to hold the horizontal ledger pipe with top movable lock arrangement made up of Cast Iron. The above cup arrangement to hold the ledger pipe shall be welded to the vertical pipe at a distance of every 0.50m c/c. The horizontal ledger pipe with various lengths ranging from 0.90m to 2.0m may be used with a diameter of 40mm and with a thickness of 2.90mm made up of Hot rolled steel. The horizontal ledger pipe shall be provided at a vertical height of every 1m. Both the ends of the horizontal ledger pipe shall be welded with a steel plate of 100mm length and a width of 60mm at the center and 35mm at both the edges. The Whole arrangement shall be placed above the bottom base arrangement having fixed/ adjustable mechanism made with a base plate of size 150 mm x 150mm with a suitable thickness as required. The working platform Jally of suitable required size shall be fabricated using MS square pipes of size 25mm x 25mm. Necessary Clamps/ Clips with bolt and nut arrangement shall be provided to the working platform jally to hold it with the abovesaid scaffolding System. Necessary Stay arrangement for the above scaffolding system shall be made at Ground level and at every Floor level using Hot rolled steel pipes of diameter 40mm with clamps. The above stay arrangements shall be provided at every 6m in horizontal direction and at every 3.6m/ floor level in vertical direction. The cost includes material and fabrication charges of all materials, transportation, labour chareges for erection & dismantling of scaffolding, etc as per standard specification and as directed by the departmental officers. (It Should be adopted for High rise building having height more than 18.30m from Ground Level only)
167Construction of INSPECTION CHAMBER of 0.90mx0.90m sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of Clay burnt Bricks of size 9” x 43/8” x 23/4” with Class designation of 7.5 and Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.
168Drilling of borewells any where in kancheepuram and Tiruvallur district including transportion from one place to another in alluvial soil sedimentary strat of clay and sand stone shale pebbles, boulders, etc. by first taking a pilot bore of 150 mm dia and the enlarging to required dia by direct or reverse rotary mud circulation method, using fuel, labour drilling and water required for drilling at the site shown by the officers including construction of mud pit.
169Upto 60 m Depth ending below ground level
170From 60 m upto 90 m Depth ending from ground level
171From 90 m upto 120 m depth ending below ground level
172Reaming from 150mm/300mm dia pilot bore to 300mm dia bore as directed by the departmental officers upto 6m depth ending below GL
173Upto 60 m Depth ending below ground level
174From 60 m upto 90 m Depth ending from ground level
175From 90 m upto 120 mt depth ending below ground level
176Supplying of 160 mm dia PVC pipe of 6 kg/cm2 without slot as weep holes of approved brand and quality for bore wells etc complete complying with standard specification and as directed by the departmental offices
177Slotted pipe
178Plain pipe (without slot)
179Supplying suitable PVC End cap (6Kg/Sqcm) of best for casing pipe of 6\\" dia borewell quality with ISI mark, The PVC should got approved by the departmental officers before execution.
180Labour charges for inserting 150mm dia PVC casing pipes assembly (with slot or without slots ) in the drilled hole including jointing the pipe with PVC coupler and with cement paste etc. complete and supported and packed the annular space with pebbles of size and quality is approved by the EE. The conveyance charges to work site to be born by the contractor)
181Charges for developing the borewell for entire depth with suitable air compressor of 600RPM capacity (minimum 8hrs) including transportation labour and fuel charges for compressor and directed by the departmental officers and conducting yield test by 'V' notch method .
182Supplying and fixing of 7.5 HP of approved brand Submersible Pump with accessories of starter, Main Switch, Panel Board etc. complete to suit the need .(The pump ste should be got approved by the EE before supply)
183Supplying & Fixing of 3 Phase Panel Board including labour charges etc., complete as directed by the departmental officers.
184Supplying of best and approved quality of HDPE pipe of following size including laying in the basement and tying with copper wire etc., complete complying with standard specification.
18540mm dia
186Supply, laying and run of 3 core 4sq.mm PVC copper UG cable with polythene wire 10 gauge stay wire etc., complete as directed by the departmental officers.
187Supplying and fixing of Nylon rope complete complying with standard specification and as directed by the departmental offices.
188Medical Gas Copper Pipeline arrangement to hang on the wall of socket type connection installation of seamless cleaned and degreased non arsenical phosphorous gas copper pipe line with saddles complete with brazing work including all copper fitting (tee, elbow, reducer, coupling). The copper pipelines should be tested suitable for a steam of working pressure of 17.34 kg. / cm2 (17 bar) and confirm to BS 864 Standard with specially made for brazed socket type connection. The medical gas copper pipeline should be tested as per standard and commissioning after painting as per International Code No. IS 2379/1963 Table-V. The pipelines installed at the various wings and floors etc., complete as directed by the Departmental Officers as per IS Code 12827 / 1989 & ISO 7396 / 1987 Specification.
18910mm OD 0.90mm thick copper pipe
19015mm OD 0.90mm Thick Copper Pipe
19122mm OD 0.90mm Thick Copper Pipe
19228mm OD 0.90mm Thick Copper Pipe
193Gas Outlet Points: (Self sealing type - Single / DIN outlet pipe) with 'S' type bracket made up of copper and the out let of non-interchangeable for other gas. The outlet points are brazed with brass bracket with self sealing valve (Stainless Steel) with all accessories and complete set and are covered by plastic cover duly colour coated as per specific gas and button cover etc., complete as directed by the Departmental Officers and as per IS Code 12827 / 1989 & ISO 7396 / 1987 Specification.
194Brass Isolation Valve suitable for the copper pipe and should be of non lubricated 90 degree turn lever ball valve of reputed make, conneced in line with medical gas pipe line system by using suitable size brass valve adopter union, ferrule, nipple, rubber \\"O' ring, tapion lap and etc. All pipe line regulators shall be capable of controlling pipe line pressure and must compatible with the requirements specified in IS 12827-1989. All valves should be pneumatically tested for twice the working pressure for the gas line as per IS Code 12827 / 1989 & ISO 7396 / 1987 Sepecification.
19515mm Isolation Valve
19622mm Isolation Valve
19728mm Isolation Valve
198Flow Meter made up of Brass with Humidifier Bottle Flow Meter should be back pressure compressed and should be accurate gas flow measurement with control range 0-13 litres per minute. It should meet strict permission and dumbling standard. The meter body should be made of brass materials. The humidifier bottle should be made of unbreakable polycorbonate material and auto cleavable at 134 degree centigrate. The rate includes flow meter and its accessories (silicon tube with mask). The cost of materials including transport, etc., complete as per standard specification and as directed by the Departmental Officer and as per IS 12827 / 1989 and ISO 7396 / 1987 Specification.
199Ward Vaccum Unit with Gauge both mounted on a collection jar of capacity 600 ml and with a wall bracket for mounting it on the wall. The collecion jar should be made of unbreakable polycarbonate materials which is fully auto cleavable at 134 degree centigrade as per standard specification and as directed by the Departmental Officers and as per IS 12827 / 1989 and ISO 7396 / 1987 Specification. The rate includes cost of silicon hose with SS nipple on either side.
200Supply, installation, testing and commissioning of equivalent to Ingersoll Rand Reciprocating Air Cooled Type (15 HP) Rating Vaccum Pump as per following provisions.As per IS 12827 / 1987 & ISO 7396 / 1987 Specificationa) Vaccum Pump - 15 HP - 1 No.b) Electric Motor - 15 HP - 1 No.c) DOL Starter with OLR - 1 No.d) Vaccum Switch - 1 No.e) Vaccum Gauge - 1 No.f) Control Frame with Fittings - 1 No.g) Suction Scrubber - 1 No.h) V-Belts - 1 No.i) GI & MS Fittings - 1 No.j) Brass Fittings - 1 No.k) Exhaust Silencer - 1 No.i) Base Frame for Motor and Vaccum Pump - 1 setm) Pilot Line with Fittings - 1 set,Vaccum Room & Air Compressor Room Inside
201Oxygen manifold arrangements of 2 banks x 20 cylinder each wing with semi automatic control panel which includes contact gauge 2 Nos., outlet pressure gauge, brass heavy duty IO x regulator 2 Nos. with suitable adopter, flexible SS Hose. Mainfold shall be of a construction and of a designs and material suitable for the service pressure in accordance with IS 1282-1989. mergency alarms with illuminating display for low / high pipeline pressure and malfunctioning of system. 1) Mainfold top frame with provision for connecting 12 cylinders on right bank and 12 cylinders on left bank with high pressure interconnecting copper tubing, silver brazing, nonreturn valve, fasteners and cylinder spport middleangle frame for claping 2 x 12 cylinders andrelated fasteners. The O2 manifold should withstand a pressure of 140 kg. / CM2. Theinstallation is commissioned after testing as perstandards and painted as per International Codeand as directed by the Departmental Officers asper IS Code 12827 / 1989 & ISO 7396 / 1987Specification.
202Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
203Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
204Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT.
205Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
206Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
207Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. (Internal)
20825mm dia
209Supply, installation, testing and commissioning of Micro Processor based conventional 8 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the departmental Officers.
210Supply and fixing in position of 12 Volt 7 AMPS Lead Acid, Sealed Maintenance Free (SMF) batteries with connecting leads, lugs terminal post, etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT.
211Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent)
212Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Equivalent)
213Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel / Equivalent)
214Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers.
215Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply above ground level.
21625mm dia
217Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT.
21880mm dia
219Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT.
220150mm dia
221100mm dia
222Supply, erection, testing and commissioning of Fire Fighting 2 Way Fire Brigade Inlet with necessary gun metal 63mm dia non-return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. (Make: KIARTAR / OMEX / EQUIVALENT)
223Supply, installation, testing and commissioning of Cast Iron Butterfly isolation valve (PN:16) as per specification with necessary flanges, GI nut, bolts & washers, painting, etc. Complete as per the technical specification.
224100mm dia
225Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
226100mm dia
227Supplying, fabricating, structural steel supports such as MS channels, angles, flats, rods as required at site with anchor fasteners, clamps, threaded rods, nuts, bolts, washers etc. complete with painting for pipe support.
228Supply and Erection of booster pumpset. Motor SPDP type, 3 phase Class 'F\\" insulation, IP protection. The Pump shall be Booster Type top discharge. The pump shall be cast iron casing, bronze impeller, steel shaft. with common base frame capable of discharging 450LPM at 30 M head. Pump to be installed at Terrace.
229Supply and Erection of Motor control centre of incoming MCCB with mechanical interlock suitable for Terrace pumpset with necessary MCCB's, contactors, etc., suitable for DOL / STAR DELTA starting mechanism, also potential free contacts shall be provided for connecting to the Building automation system. The panel shall also provided with indicating lamps, voltmeter, ammeters, Digital energy meters, selector switches, auto/manual switches, OLR, etc. The panel shall be of IP protection (Located at Terrace)
230Supply and laying of FRLS PVC insulated 3 core 6 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers.
231Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.
232Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: H-GURU / ISI MAKE / EQUIVALENT.
233Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISI MAKE / EQUIVALENT.
234Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT.
23525mm dia
236Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. (External)
23725mm dia
23815mm dia
239Servicing of Monoblock Pump as per specifications.
240Servicing of Main Electrical Pump as per specifications.
241Servicing of Diesel Engine Pump - Auto control panel as per specifications.
242Servicing of Diesel Engine Pump and Changing, Engine oil, Coolent oil, Fuel filter and oil filter as per specifications.
243Engine oil -10 lit
244Coolent -10 lit
245Fuel fillter
246oil fillter
247Supply and fixing in position of 12 Volt 180 AH Lead Acid, Sealed Maintenance Free (SMF) batteries with connecting leads, lugs terminal post, etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT.
248Manufacturing and supplying Executive Table of size 5'6\\" x 2'6\\" to a height of 2'6\\", made out of 25mm thick exterior grade both side pre laminated wood particle board (ISI & ISO certified) for the table top and 18mm thick exterior grade both side pre laminated wood particle board (ISI & ISO certified) for all other vertical planks the table includes 1 no of Drawer, 1 no of cupboard with lock & Key in one side and 3 no of drawers with 3 in 1 lock and key on the other side the particle board cutting edges are finished with PVC edge banding. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
249Providing Triple Seated Stainless steel waiting chair of size 1.80mx0.60mx0.80m made out of perforated stainless steel sheets at bottom, back rest of best quality and the arms and legs are also made our of stainless steel tubes. The cost of stainless steel triple seated chair includes conveyance charges and fixing in position etc., the stainless steel chair should be got approved by the Executive Engineer before fixing.
250Manufacturing and supplying Plain Cot 1040000.00 13000.00 80.000 NOS 85381090 1 18% SS 202 Cot Size - 72\\" x 36\\", Top Sheet made of 18G thickness, Dia 1.25\\" with 18G thickness Leg pipe. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
251Manufacturing and supplying Plain Cot matress-Density - 28 micron with 4\\" foam and Rexine cover. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
252Manufacturing and supplying Bed Side Locker -MS-Size - 14\\" x 14\\" x 30\\" with SS Top, Drawer - 1 no, Cabin - 1 no and 2\\" wheels. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
253Manufacturing and supplying Pillow with rexin cover. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
254Manufacturing and supplying Examination Couch Deluxe with 3 Cabins, 3 Drawers, Foot step stool, Manually operated backrest and 2\\" Mattress. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
255Manufacturing and supplying Double Foot Step Stool. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
256Manufacturing and supplying FOOT STEP STOOL (POWDER COATED) SINGLE. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
257Manufacturing and supplying Instrument Trolley Dressing trolley with Basin and Bucket. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
258Manufacturing and supplying Crash Cart Trolley (SS) with 6 bins, medicine drawer and Cylinder holder. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
259Manufacturing and supplying Drug Trolley (MS) With 7 Line Multicolor Plastic Bins and 4 inch Wheels. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
260Manufacturing and supplying Big table. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
261Manufacturing and supplying chair. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
262Manufacturing and supplying Geyser. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
263Manufacturing and supplying SS Rack. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.
264Supplying and fixing Shade Net (Green Net) for under construction of high rise Ridges etc. Complete Complying with standard specification and as directed by the Departmental Officers.
265Supplying and erecting in position of 1000 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.
266Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End
267Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Lower End
268Supply and fixing of 4 Feet LED 20W Fitting with LED 20Wtube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting
269Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb.
270Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.
271supply and fixing of Minimast (12 Metre) with 6 Nos. 150W LED Fitting
272Supply and fixing of 150W High Bay with LED (Higher end) Fittings
273supply and fixing of 1200mm (48\\") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600mm down rod with fan clamp with side plates and cross arm of size 450mm (18\\")
274Supply and fixing of 300mm (12\\") sweep (light duty) AC exhaust fan complete without provision of hole in the wall
275Supply and fixing of louvers shutters arrangements for 300mm (12\\") sweep (light duty) AC exhaust fan
276Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour. (RR / Polycab)
277Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection.
278Supply and fixing of 2 no. 6A two module socket, 1no.6/16 A two module socket , 2 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Lower End
279Supply and fixing of 1 no.6/16 A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Lower End
280Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour. (RR / Polycab)
281Supply and fixing of 1000W automatic electric water heater of 25 litres capacity suitable for 230V 50c/s AC supply on suitable MS clamps with 3 core flex wire,but without plumbing work.
282Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
283Supply and Run of 4 of 16 sq.mm. PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 16 sq.mm copper wire with painting of suitable colour. (RR / Polycab) for Power DB
284Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End(MLDB)
285Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
286Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 No 125A 4P MCCB as incoming and 6 Nos 63A 3P MCB , 6 Nos 6A to 32A SP MCB as outgoing with cable end box on suitable angle iron frame on wall with Earth connection only. Higher End
287Supply, Erection, testing and commissioning of 250A capacity dust and vermin proof cubical Vertical type panel board made up of 16SWG CRCA sheet with supply and fixing of the following interior mounting switches with HRC fuse link arranged Horizontally with horizontal bus bar chamber and left and top side cable chamber. 1) 250A TPN SDF Unit (I/C)-1No 2) 125A TPN SDF Unit - 1 No (O/G) 3) 63A TPN SDF Unit - 10 Nos (O/G)
288The copper buses shall be mounted on SMC bus bar insulator at proper and sufficient interval as per IE rules. The bus bar chamber shall be segregated from the adjacent chamber by providing hylum sheet of 3mm thick as partition. Heat shrinkable sleeves shall be provided for bus bar with colour code.The panel shall be provided with metering chamber consisting of 0-500V Voltmeter with selector switch, 0-400A Ammeter with selector switch and CT coil. LED indication lamp shall be provided with to toggle switches and backlit fuse units.
289The panel shall have powder coated painting of approved colours, approved by the department officers. The DANGER board / caution board shall be fixed in front side of panel board The panel shall be mounted on 3” x 1 ½” x ¼” MS base channel provided all round at the bottom of the panel. The whole arrangements shall be erected on a masonry pedestal to be constructed with suitable foundation with bolt and nuts, such that the lowest SDF unit fuse handle is at a height of 0.75m from the ground level. (Lighting Panel)
290Supply, Erection, testing and commissioning of 250A capacity dust and vermin proof cubical Vertical type panel board made up of 16SWG CRCA sheet with supply and fixing of the following interior mounting switches with HRC fuse link arranged Horizontally with horizontal bus bar chamber and left and top side cable chamber. 1) 250A TPN SDF Unit (I/C)-1No 2) 125A TPN SDF Unit - 3 Nos (O/G) 3) 63A TPN SDF Unit - 6 Nos (O/G)
291The copper buses shall be mounted on SMC bus bar insulator at proper and sufficient interval as per IE rules. The bus bar chamber shall be segregated from the adjacent chamber by providing hylum sheet of 3mm thick as partition. Heat shrinkable sleeves shall be provided for bus bar with colour code.The panel shall be provided with metering chamber consisting of 0-500V Voltmeter with selector switch, 0-400A Ammeter with selector switch and CT coil. LED indication lamp shall be provided with to toggle switches and backlit fuse units.
292The panel shall have powder coated painting of approved colours, approved by the department officers. The DANGER board / caution board shall be fixed in front side of panel board The panel shall be mounted on 3” x 1 ½” x ¼” MS base channel provided all round at the bottom of the panel. The whole arrangements shall be erected on a masonry pedestal to be constructed with suitable foundation with bolt and nuts, such that the lowest SDF unit fuse handle is at a height of 0.75m from the ground level. (Power Panel)
293Supply and clamping of 3 1/2 x 95 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (RR/ polycab/ KEI)
294Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection
295Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.
296Supply and clarnping of 3 1/2 x 120 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (RR/ polycab/ KEI)
297Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection
298Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.
299Supply, Erection, testing and commissioning of 630A capacity dust and vermin proof cubical Vertical type panel board of size likely 7.5 ft x 7.5ft x 1.5 ft width made up of 16SWG CRCA sheet with supply and fixing of the following interior mounting switches with HRC fuse link arranged Horizontally with horizontal bus bar chamber and left and top side cable chamber. 1) 630A FP SDF Unit (I/C)-2Nos 2) 400A TPN SDF Unit (O/G) -2Nos 3)250A TPN SDF Unit (O/G)-2Nos and.4)63 - 4Nos
300With the bus bar size of 60 mm x 6 mm Cu for three phases and neutral and 60 mmx 6 mm copper strip all around the panel for the earth bus
301The copper buses shall be mounted on SMC bus bar insulator at proper and sufficient interval as per IE rules. The bus bar chamber shall be segregated from the adjacent chamber by providing hylum sheet of 3mm thick as partition. Heat shrinkable sleeves shall be provided for bus bar with colour code.The panel shall be provided with metering chamber consisting of 0-500V Voltmeter with selector switch, 0-600A Ammeter with selector switch and CT coil with the rating of . LED indication lamp shall be provided with to toggle switches and backlit fuse units.
302The panel shall have powder coated painting of approved colours, approved by the department officers. The DANGER board / caution board shall be fixed in front side of panel board The panel shall be mounted on 7.5” x 1” x 1.5” MS base channel provided all round at the bottom of the panel. The whole arrangements shall be erected on a masonry pedestal to be constructed with suitable foundation with bolt and nuts, such that the lowest SDF unit fuse handle is at a height of 0.75m from the ground level.
303Supply and fixing of 400 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with Earth connection only.
304Supply and Laying of 3 1/2 x 300 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
305Supply and clarnping of 3 1/2 x 300 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.
306Supply and fixing of brass cable gland for 3-1/2 x 300 sq.mm. PVC armoured LTUG cable with earth connection
307Supply and providing cable end termination of 3-1/2 x300 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.
308Supply and clarnping of 3 1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.
309Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
310Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection
311Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.
312Supply and run of 25 mm x 3 mm tinned copper flat with necessary clamps/supports on wall / floor / ground for earth connection
313Earthing as per ISI specification with an earth electrode of 2.1 mtr class ‘B” GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mmx6mm with necessary funneling arrangement with necessary masonry work with 38 mm RCC cover slab for brick masonry works.
314Supply and Fixing of Air termination rod 16/ 10 mm ( 4 Metre Lightning rod), Lightning counter - LCD display, Rust resistant non corossive 10 mm dia Copper Bonded Steel round conductor for Earth terminationand battery, Maintenance Free earthing with Copper rod of 17.2 mm dia and 3m length and S.S test joint
315Supply and Fixing of Air termination rod 16/ 10 mm ( 2 Metre Lightning rod), Lightning counter - LCD display, Rust resistant non corossive 10 mm dia Copper Bonded Steel round conductor for Earth termination, Maintenance Free earthing with Copper rod of 17.2 mm dia and 3m length and battery and S.S test joint
316Supply and run of 25 mm x 6 mm tinned copper flat with necessary clamps/supports on wall / floor / ground for earth connection
317Supply and run of 25mm X 6mm GI strip with necessary MS clamp supports on wall / floor / ground for earth connection
318Supply and installation of 2.0TR (4500K Cal/Hour) Split type Air conditioner 3 star rated confirming to IS 1391 (part 2) 1992 with Amendment No 1 fitted with hermetically sealed air compressor, operating with refrigerant R-22 suitable for wall mounting for 230V 50 HZ 4 wire Ac supply cable or performing the functions as cooling dehumidifying. Airculating and Filtering.
319Supply and fixing of 5 KVA Automatic Voltage stabilizer with operating voltage range 170V to 270V and output voltage range 220 Volts to 240 Volts with suitable our off and time delay arrangements suitable for operation on 230 Volt single phase supply (Make 'V guard, Syscom or equivalent
320Supply and laying of 5/8\\" and 3/8\\" Copper Pipe (Extra beyond 3 metres supplied with AC unit
321Supply and fixing of Ms stand for fixing outdoor unit
322Supply and fixing of water drain pipe line (1” PVC Pipe)
323Design, Engineering Supply, fabrication, erection, testing, Commissioning and handing over of Service/ Dumb waiter lift MRL Speed 1 m/s with M.S. Panels, microprocessor based controller,VVVF drive as per following Technical Specification.1. Type of Lift : Dumb Waiter Service.2. Capacity of Lift : 240 Kg.3. Speed : 1 Metre / Sec.4. Type of Drive : VVVF Drive5. No. of Floors : Ground + 6 Floors.6. Over Load warning Indicator and fireman’s Switch to be provided.7. Design of Car : M.S. Painted with M.S. chequered plate flooring.8. Position of Machine : Directly above the lift shaft9. No. of Landing Entrance : One in front (Ground and 6th Floor Only) 10. No. of Car Entrance : One in front only.
32411. Car Entrance Door : No Door.12. Landing Entrance Door : Collapsilble gate M.S. painted with landing door frames.13.Lift well existing : 1350 mm (Width) x 1350 mm (depth).14. Lift pit depth available : 1200mm.15. Car Size : 800mm (Width) x 1250mm (depth).16. Car Clear opening : 800mm wide x 1200mm.17. Power Supply : 400 / 440V 3 Phase, 50 Cycles / sec AC supply for power and 230 V 50HZ single phase AC supply for light. at machine room. 18. Extremly Extended push buttons with / without Attendant.19. Car fittings : Bulkhead Fittings.20. Lift well : RCC construction with brick masonary. 21.Indication : Up / Down Digital for all landings.22. Minor Builder Work: To provided by lift contractor. 23. Scaffolding : To be provided by lift contractor.
32524. M.S. Sill angles and facia plates : Included.25. Steel for lift machinery : Included.26. Servicing and maintenance : Free comprehensive Servicing and maintenance during the guarantee period of one year.27.Lift License : Preparation of drawing, payment of charges to CEIG / Lift inspectorate and insurance polices if any anf obtaining CEIG safety certificate as per lift act.28. Special Feature:(a). “UP and DOWN arrows in landings only.(b). Steel Cubical for Controller.(c). M.S. Door frames for Landing Entrance.29. Supply of Operation and Maintenance manual with necessary tools for operation. The list of Tools should be furnished by the contractor in a separate sheet duly signed.
32630. Other Standard Features: Phase failure and phase reversal relay, T-guide brackets for car and counter weight, rubber padding under winding unit, Motor of adequate capacity single reduction warm gear, electro mechanic brake with compression springs with car safety gear, buffer machanical door locks, emergency key, side supporting angles motor over load protection devices. Final limt switch, main suspension ropes, counter weights, lifting joist for mounting the machineries.
327Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End
328Supply and fixing of 4 Feet LED 20W Fitting with LED20 W tube(LowerEnd) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting
329Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb
330Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Lower End
331Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 4sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.
332Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End.
333Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal door) with 1 no. 63A 4P MCB switch as incoming and 1 no. 63A 3P MCB, 9 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End
334Supply, Erection, testing & commissioning of 400A capacity vermin dust proof cubical panel of 14SWG fine quality MS sheet steel enclosure for accommodating 400A TPN Copper Busbar, raising mains of 1Run of 50mm x 6 mm Copper busbar for 3 phases and neutral with 1 Run 50 x 6 mm Copper Busbar with 25 x 6 mm Copper flat for earth bus and with provision for accommodating incomer MCB - 400 Amps adaptor boxes tap boxes including Copper Bus inter connection. (power & Lighting raising mains) for connecting all utility sockests, raw power sockets, lighting distribution boards, UPS gadgets)
335Supply and fixing of End Cover for the rising main.
336Supply and fixing of 4P 250A, Tap off Box with MCCB
337Supply and fixing of Spring Support brackets
338Supply and fixing of Rigid Support brackets
339'Supply and fixing of 400A copper flexible for termination
340Supply and Fixing of wall support brackets for vertical alignmnet of raising mains
341GST @ 18% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58406684
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 24-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Construction Of Additional Sixth Floor In The Existing Maternal And Child Health Special Care Centre (G+5 Floors) Building In Government Medical College Hospital Campus At Thiruvallur In Thiruvallur District.
Basic Detail
Tender No PWD/BCMC1/15-2/2026-27
Bidding Type Tender
Location
City Thiruvallur
State Tamil Nadu
Key Dates
Publish Date 06 Nov 2026
Submission Date 24 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 3.68 Lakhs
Exemption Not Available
Document List
5695f75b-cad6-43ad-9f38-fb56106f1cae.html
BOQ_867787.xls
PreQualificationmchtiruvallur.pdf
PriceTenderConditionMCHTiruvallur.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

5695f75b-cad6-43ad-9f38-fb56106f1cae.html

xls

BOQ_867787.xls

pdf

PreQualificationmchtiruvallur.pdf

pdf

PriceTenderConditionMCHTiruvallur.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender