Tender For Work Of Installation Of Theme Lights And Poles On 100 Feet Road (02 Km) From Pilibhit Bypass To Air Force Road Under Nath Corridor And Operation And Maintenance For 05 Years.
Tender Value
2.71 Crore
Estimated cost
Bid Submission
04 Dec 2026
24 days left
EMD
5.43 Lakhs
Bank guarantee accepted
Document Fee
11000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Of Installation Of Theme Lights And Poles On 100 Feet Road (02 Km) From Pilibhit Bypass To Air Force Road Under Nath Corridor And Operation And Maintenance For 05 Years.
BOQ
| Sl. No. | Item Description |
| 1 | SITC All-in-one integrated Hybrid Solar streetlight consisting of solar photovoltaic module, battery, battery management system, control electronics, LED driver, inter-connecting cables and pole mounting piece integrated into the luminaire as a single unit. The unit should meet the above-mentioned specifications. Luminaire Specifications The luminaire shall have highly efficient mid power white dimmable LEDs with a typical corelated color temperature of 5700K with CRI>70 and lenses with efficient bat wing optics designed for efficient light distribution for secondary roads. The Lumens Output of the luminaire shall be minimum 6000 Lumens. The Efficacy of Luminaire shall be of Minimum 210 Lumens / Watts. The life class should be 50000 Burning hours with minimum 70% lumen maintenance. The Successful bidder shall submit LM 79 & LM 80 of the Fitting and LED. A switch shall be provided on the housing to disable the luminaire when required. The housing should be strictly made in India and factory visit to casting factory will be made to certify this . The Luminaire shall meet the relevant IEC codes mentioned in Table 1. The housing of the luminaire shall be made of single piece pressure die cast aluminum housing for ruggedness and excellent heat dissipation with IP 65 protection and IK08 impact resistance. The front cover should be made of weather resistant, UV stabilized polycarbonate. The front cover should be tightly secured with the housing to ensure that the luminaire has an ingress protection of IP65. The luminaire shall have a smart self-diagnosis feature with LED indicators for battery charging, deep discharge and Load cut off indication visible from ground in daylight. The luminaire shall be with specially designed pole mounting piece enabling lateral as well as post top mounting and installation at varying tilt angle from 0 to 10 degree for optimal light distribution. Integrated Charge Controller. The luminaire shall have a highly efficient, integrated microprocessor based MPPT charge controller with driver mounted on the same board to minimize power loss. This intelligent power management system shall maximize the overall system efficacy to > 210 lumens/watt. The charge controller shall be supplied with a preconfigured dimming profile that shall dim the luminaires as desired (should be configurable at site ) to further increase the autonomy of the system. The luminaire shall have inbuilt Hybrid power supply that can charge the battery during non-sunny days automatically.The system shall incorporate a Smart Hybrid Charging feature with MPPT-based PV monitoring that continuously tracks real-time solar insolation levels. In overcast or low-irradiance conditions, the system shall automatically calculate the deficit between available PV generation and the required charging power, seamlessly drawing the balance energy from the grid to maintain optimal battery charging. The hybrid controller shall ensure smooth transition and blended power draw between PV and grid sources without interruption, prioritizing solar energy at all times while grid power acts as a supplementary source. The system shall cease grid supplementation automatically once PV insolation recovers to sufficient levels, ensuring minimum grid dependency and maximum solar utilization and thus avoiding black out situations. Systems that merely route the connected load to grid supply in the absence of sufficient battery charge, without actively supplementing the battery charging process from the grid, shall not be acceptable. The Controller Efficiency shall be > than 90%. and shall have the following inbuilt protection features: Protection against battery overcharge and deep discharge conditions , Protection should be provided against battery and Panel reverse polarity , Over current protection , Protection for reverse flow of current through the PV module(s) should be provided, ON/OFF switch to be provided to prevent discharge of battery during storage / before Installation The Controller shall meet the relevant IEC codes mentioned in Table 1. Solar Module - The SolarCell shall be made of Premium grade mono crystalline silicon Cell. The Solar Module Power shall be as per OEM Design. The Solar Module Construction shall The Cell capacity should be minimum 3.2V 15AH. The Battery Pack should have Inbuilt Battery management system Module with following safety features Accidental short circuit, Over discharge, Over charge, Over temperature, Low Temperature. The battery shall be Capable of Providing Power to the LED Fitting for 12 Hrs per night for 2 nights as per the default dimming profile mentioned above. The Life Cycle shall be Minimum 2000 Cycles for 90% daily depth Discharge.The Battery shall meet the relevant Compliance Standards mentioned in table 1 1-a 494 Nos 65833ABSTRACT OF COST S.No. Particulars Quantity Unit Unit Rate Safety of Luminaire for Road and Street Lighting: IEC60598-2-3 Safety of Power Converter for use in Photovoltaic Power Systems Part 1: General requirements: IEC 62109-1 Electromagnetic compatibility Directive 1.EN 61547: 2009/ IEC 61547: 20092.EN 55015: 2019+A11:2020/ CISPR 15: 2018 3.EN 61000-3-2:2019/IEC 61000-3-2:2018 4.EN 61000-3-3:2013+A1:2019/IEC 61000-3-3:2013+A1:2017 Radio disturbance characteristics: CISPR 15 Low Voltage Directive (LVD), 2014/35/EU EN 60598-1:2015+AMD1:2018/ IEC 60598-1:2014+ AMD1: 2017 EN 60598-2-3:2003 + A1:2011/ IEC 60598-2-3:2002 AMD1: 2011 Safety of Solar Panel Module: IEC 61730-1,2 & IEC 61215 & BIS Safety of Lithium Ferro Phosphate Battery, Safe transport of lithium-ion battery: IEC 16046, IEC 62133 & BIS, UN 3481 Restriction of the use of certain Hazardous Substances in electrical and electronic equipment Directive (RoHS), 2011/65/EU: EN 50581:2012 (Market Lowest Rate) |
| 2 | SITC of 6-meter height decorative Hot Dip Galvanized (HDG) and PU painted mild street light pole with traditional Hindu religious motif design, comprising Om ( (ॐ) emblem medallion and Trishul (त्रिशूल) finial at top, finished in antique bronze/brass color PU paint. (Double Arm bracket ) and BDA motif as per T.D. The pole shall be a step/swaged type comprising two sections — bottom section of M.S. pipe Ø114mm x 1 mtr long with wall thickness of 3.2mm along with Alu Spun Casting as per T.D. and top section of M.S. pipe Ø76mm x 5 mtr long with wall thickness of 3.0mm. Base plate shall be 400mm x 400mm x 12mm thick M.S. plate with anchor bolt provision, including. The pole shall be Hot Dip Galvanized (HDG) as per IS:2629 for orrosion protection, followed by high-quality PUpaint in antique bronze finish. All decorative casting elements shall be of aluminum material, including the base flange cover, joint cover at step section, Om medallion, and Trishul finial. Bracket & Decorative Elements the pole shall be provided with a single outreach arm bracket of suitable outer diameter compatible with the lighting fixture, 1 mtr long, elegantly curved as shown in the design drawing. Decorative aluminum casting shall be provided at (a) base cover, (b) step joint section, (c) circular Om emblem medallion of minimum 200mm dia mounted on pole shaft, and (d) Trishul finial at the top of the pole. All decorative elements shall be finished in matching antique bronze PU paint.The pole design, material, and fabrication shall conform to IS:5613 (street lighting). The HDG coating shall meet IS:2629 / IS:4759. The supplier shall submit.(Market Lowest Rate) |
| 3 | Supply of Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Timer with required contactor for auto switching. Power panel suitable for indoor/outdoor applicable and f loor mount / wall mount options. - 3 Nos of 20 A 4P Outgoing MCB's. - 1No of 32 A 4P Incoming MCB., Digital Timer-1 No ( size of panel - length & breadth of panel -1.5 ft x 2ft , Depth - 10inch andsheet thickness 16gauge and foot 20 inch ). |
| 4 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.Above 4.5 Meter and upto 6.5 MeterD.S.R. E&M 2025 Rate : 6123.00x0.755x0.97x1.01= Rs. 4529.02D.S.R. Item No. 12.3.1 |
| 5 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/recessed steel conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wireD.S.R. E&M 2025 Rate : 370.00x0.755x0.97x1.01= Rs. 273.68D.S.R. Item No. 1.7.1 |
| 6 | Suyply and Laying of Aluniniun Conduetor PVC insulnted armouredserved sheathed cables 1100V grade at a depth of 750 mm blow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top as directed by Engineer in charge complete all respect includingexeasation and refllling. The armouring of the cable shall be propety connected with earth conductor by clamps ete.(a) 16 sqmm 4 CoreUP PWD SCHEDULE 2024 (CHAPTER-20b SI NO 20b.1.9)(283X0.8475=240 ) |
| 7 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal)D.S.R. E&M 2025 Rate :136.00x0.755x0.97x1.01= Rs. 100.60DSR Item 15.15.1 |
| 8 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required.D.S.R. E&M 2025 Rate :15004.00x0.755x0.97x1.01= Rs. 11098.06DSR Item 5.6 |
| 9 | Suyply and Laying of Aluniniun Conduetor PVC insulnted armouredserved sheathed cables 1100V grade in Existing RCC/Hume/Metal pipe as directed by Engineer in charge complete all respect includingexeasation and refllling. The armouring of the cable shall be propety connected with earth conductor by clamps ete.(a) 50 sqmm 3-1/2 CoreUP PWD SCHEDULE 2024 (SI NO 20b.1.12)(527X0.8475=446.63 ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender