Tender For Repair Of Submersible Pump For Various 33 Kv S/S Under Circle South, Jaipur (For F.Y. 2026-27)
Tender Value
20 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
1 days left
EMD
40000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Submersible Pump For Various 33 Kv S/S Under Circle South, Jaipur (For F.Y. 2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | PART-A (Bldg.) |
| 2 | 21.1.3/ELabour charges for installation of submersible motor pump set including lowering/ delowering of pipes, cables, accessories etc. in tube-well/ open well complete including T&P, transportation of tripod, chain pulley block & any other material required for this purpose complete in all respect. Delowering and Lowering |
| 3 | 2.24.1/PHED(A)Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B\\" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. (Rates are exclusive of GST) 32 mm dia |
| 4 | 2.19.1/PHED(A)Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980including making connection etc. (Rates are exclusive of GST) 3 core 4.0 Sq.mm |
| 5 | 3 core 10.0 Sq.mm (2.19.3/PHED)(A) |
| 6 | 4.8.4/S-4S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size: 200 mm dia |
| 7 | 2.22/PHED(A)Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.(Rates are exclusive of GST) |
| 8 | 21.6.2.1/ESITC of Radial / mixed flow water and anti-corrosive liquid filled submersible motor pump sets suitable for 100/150mm dia borewell. The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The job includes labour part of lowering of riser pipe G.I./ H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.150 mm diameter Submersible pump shall have following HP Rating, phase, Head range, Discharge range respectively.3.0 HP, 3-Ø, (40 -110)Mtr, (280-50) LPM |
| 9 | 5.0 HP, 3-Ø, (72 - 161)Mtr, (230-48) LPM (21.6.2.2/E) |
| 10 | 12.5 HP, 3-Ø, (129 - 250)Mtr, (400-163) LPM (21.6.2.5/E) |
| 11 | 21.13.1.2/ESITC of IP 54 OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Coordination Chart and made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection(for three phase pumps), Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps, 2P/4P MCB etc. suitable for following rating motors complete in all respect. 2.0 HP to 3.0 HP (DOL starter) |
| 12 | 21.13.2.1/EFor Three phase Submersible / Mono block pumpUpto 3.0 HP ( DOL starter ) |
| 13 | 3.0 HP to 5.0 HP ( DOL starter ) (21.13.2.2) |
| 14 | 12.5 HP to 15.0 HP ( Star / Delta starter ) (21.13.2.6) |
| 15 | 21.3.1/EProviding & Laying of Polypropylene rope Confirming to IS:5175 for submersible pump of following sizes. complete in all respect. 12mm (suitable up to 50 mm OD pipe) |
| 16 | 2.25.1/PHED(A)Providing & Lowering in tube well ISI marked HDPE pipe as per IS 4984:1995 or amended up to date in PE 80 grade and class PN 10 of following dia. includingHDPE/GI fittings and PVC rope confirming to IS 5175:1992 or amended up to date, along with clamping of submersible cable etc. complete in all respect. (Rates are exclusive of GST) 40 mm dia |
| 17 | 26.74.2/ERewinding of single phase/3phase submersible motor including all necessary material and of the same characteristics as original with required size of super enamelled wire 'E' class insulation material and testing etc. as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. 2.0 H.P. |
| 18 | Above 3.0 HP to 5.0 HP (26.74.3/E) |
| 19 | From7. 5 HP to 10.0 HP (26.74.4/E) |
| 20 | 26.75.2/ERepairing of submersible pump of with replacement of broken impellers ,diffuser,bush/bearing set , oil seal complete with testing etc. as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. 2.0 H.P. |
| 21 | Above 3.0 HP to 5.0 HP (26.75.3/E) |
| 22 | From7. 5 HP to 10.0 HP (26.75.4/E) |
| 23 | 21.2.2.1/ESupply & fixing of PVC threaded casing pipes for Tube well (IS 12818:1992) as required more than 400 ft to 1200 ft. Depth 40mm dia |
| 24 | PART- B (Item Rate Basis) |
| 25 | Repair of pannel board for submersible pump installed at various JPD premises including changing/repairing of Capacitor/Voltmeter/ammeter/relay/indicating lamps for start and run position/ any part to make pannel board in working condition complete in all respect as per directions of Engineer in Charge. The job also includes warranty of pannel board upto maturity of SD work including frieght charges of parts with mechanics upto shop required if repairing of panel board attended again within warranty preiod 1.0 HP to 3.0 HP (Single phase) |
| 26 | (B) 3.0 HP to 5.0HP (Three phase) |
| 27 | P&F of 4 nos HSFG nuts and bolts of 3\\" size as per IS specification along with washer and heavy duty rubber seal for jointing of GI pipes of 32/50mm dia for submersible pump i/c all labour, transortation, T&P complete as per direction of E/I. |
| 28 | P&F Steel nipples with nuts and bolts for jointing/extending 40mm OD HDPE Pipe including all T&P labour etc as per directions of Engineer in Charge for all lead and lift Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender