Tender For Providing And Fixing Of Fire Fighting System As Per The Audit Report Of Delhi Fire Service At 36, Mahadev Road, New Delhi.
Tender Value
9.13 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
11 days left
EMD
18278
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Of Fire Fighting System As Per The Audit Report Of Delhi Fire Service At 36, Mahadev Road, New Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Providing suitable foundation for Polyethylene Water Storage Tank at terrace level with having CC 1:2:4 (1 cement : 2 Corses sand : 4 Stone aggregate of 20 mm nominal size) for placing the same at terrace level. The work included 12 mm cement plaster 1:3 (1 cement : 3 Cors Sand) with a floating coat of neat cement punning including centering and shuttering required etc. complete to the entire satisfaction of Fire Officer. |
| 2 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Steel Work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat cost of approved steel primer using structural steel etc. as reqd.In stringers, treads, landing etc of stair cases, including use of chequered plate wherever required, all complete |
| 4 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 5 | Providing and Fixing hard drawn steel wire fabric of size 75 x 25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of \\"L\\" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approbed by Engineer-In-Charge. |
| 6 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 7 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required |
| 8 | 25 mm dia |
| 9 | 80 mm dia |
| 10 | 100 mm dia |
| 11 | Supplying and fixing Single Headed Internal / External Hydrant Valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with 80 mm dia flanged inlet, cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless Steel cap, chain and all accessories as required etc. complete to the entire satisfaction of Fire Officer.Single Headed Stainless Steel |
| 12 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required |
| 13 | 80 mm dia |
| 14 | 100 mm dia |
| 15 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required |
| 16 | 80 mm dia |
| 17 | Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585. 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 M Long |
| 18 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 19 | Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required |
| 20 | Supplying and fixing of Reinforced Rubber Lined (RRL) Fire Hose Type 3, ISI Marked conforming to IS:636, 15 mtr long with ISl marked Stainless Steel coupling dia 63 mm with GI Binding etc. complete to the entire satisfaction of Fire Officer. |
| 21 | (a) Providing, Fixing, Testing and Commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, completein all respects, as required : (Terrace Pump)(b) Centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required.(c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply.(d) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts ete.as required.(e) Suitable cement concrete foundation duly plastered and with anti vibration pads450 LPM at 40 m Head |
| 22 | Supplying, installing, testing and commissioning of Diesel Engine Driven Terrace Fire Pump (Booster Pump) suitable for automatic operation, consisting of the following, complete in all respects as required :(a) Centrifugal pump of cast iron body, bronze/gun metal impeller with stainless steel shaft, and mechanical seal, designed to deliver a specified flow rate at a rated head.(b) Suitable BHP,4-stroke, multi-cylinder diesel engine equipped with an automated/manual dual-starting mechanism(battery start), standard instrumentation, residential-type silencer, and fuel tank.(c) M.S. fabricated common base plate, flexible coupling, coupling guard, and foundation bolts.(d) Equipment support foundation consisting of a cement concrete block duly plastered, fitted with anti-vibration pads.450 LPM at 40 m head |
| 23 | P/F/T/C of custom designed Electrical panel made out of 16 gauge MS sheet, for manual operation of existing two terrace pump panles, with suitable operating push switces, and indication lamps etc. complete as required |
| 24 | Providing and fixing of G.I.Tank connection including nipple, washer, socket, check nut outside and inside and making necessary connection etc. complete as per the direction of Fire Officer (80 MM Dia). |
| 25 | P/F/T/C of Fire Cabinet Fabricated from 16 SWG M.S. Sheet with front double door opening including fixing/welding BRC fabric of size 25 x 25 mm of 12 SWG in door opening as well as providing 4 mm thick glass sheet of following size etc. complete in all respect and entire satisfaction of Fire Officer. |
| 26 | 1200 x 900 x 450 mm |
| 27 | 600 x 600 x 450 mm |
| 28 | Supply and installation of 25 mmdia Gun Metal Air Release Valve of approved quality etc. complete as reqd. |
| 29 | P/F/T/C/ of Forzed Brass Ball Valve screwed type of approved quality complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. |
| 30 | 25 mm dia |
| 31 | S/I/T/C of Copper Conductor PVC Insulated and PVC sheathed armoured cable ISI marked including saddles screw etc. as required for termination including paint etc. complete in all respect to the entire satisfaction of Fire Officer |
| 32 | 6 Sq mm x 4 core |
| 33 | Providing and Fixing of Exit / Escape Route Signages/ Emergency Evacuation Plan made of 3 mm +/- 10 % Aluminum composite panel with photo luminescent self glowing signages in desired text/ graphics with U.V proof coating for pad protection fixed with mounting tape, steel screw which ever is required etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. |
| 34 | Supplying, Installation, Testing and Commissioning of CO2 type Fire Extinguisher ISI marked conforming to IS: 15683:2018 of Capacity 4.5 Kg. complete with delivery hose horn, squeeze grip/ wheel type release valve, locking arrangement, operation manual and bracket. Operating Temperature: - 30ºC to + 60ºC etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. |
| 35 | Supplying, Installation, Testing and Commissioning of Powder Fire Extinguisher (Stored Pressure type) Capacity 06 Kg duly ISI marked conforming to IS: 15683:2006, with IS 4308, ISI marked ABC powder complete with squeeze grip release valve, discharge pipe, locking arrangement, pressure gauge, operation manual and bracket. Operating Temperature: -30ºC to + 60ºC etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. |
| 36 | Supplying, Installation, Testing and Commissioning of Wet Chemical (Stored Pressure) “F’ Type ISI marked IS: 15683 Capacity 9 Litre Fire Extinguisher, Complete with SS body, squeeze grip release valve, locking arrangement, pressure gauge, operation manual and bracket. Complete in all respe etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender