Defence Statutory Bodies & Commissions/Committees Closing in 7 days TDR #58405731

Tender For Special Repair Of Sbm-11 (Bldg No. P- 257) At Naval Station Karanja

Issued by Statutory Bodies & Commissions/Committees · Raigad, Maharashtra
Tender Value
44.49 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
7 days left
EMD
88986
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair Of Sbm-11 (Bldg No. P- 257) At Naval Station Karanja

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 13-Nov-2026 amendment to BOQ Other 28-Nov-2026
2 13-Nov-2026 Revised BOQ BOQ 28-Nov-2026

BOQ

Name of Work:- SPECIAL REPAIR OF SBM-11 (BLDG NO. P- 257) AT NAVAL STATION KARANJA
Sl. No. Item Description
1Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed
2S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of required colour, having tensile strength of 550 Mpa as in roof covering / cladding fixed to wall or ceilings with self tapping screws etc. complete all as specified and directed
3S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding fixed to wall or ceilings with self tapping screws etc. complete all as specified and directed
4Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.
5Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed by Engr-in-Charge
6S&F anodised aluminium snap grid (size of gris 605 mm x 605 mm) frame work for false ceiling complete all as specified and directed by Engr-in-Charge
7S&F of hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in-Charge
8S&F for 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws fixed in ceiling, complete all as specified and directed by Engr-in-Charge
9M&L preparation of new previously untreated non asbestos cement surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of oil bound distemper over a coat of alkali resisitant primer complete all as specified and as directed.
10Taking down Chowkhats or frames exc. 1.5 sqm and not exc. 4 sq. m each with shutters (without taking off shutters from the frames), complete all as specified and directed by Engr-in-Charge
11S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Note:- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be admissible.
12S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size including with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In-Charge.Note: Stainless steel butt hinges and necessary S S screws shall be paid separately.
13S&F Galavanised MS 8 mm outer diameter M-6 dash fastener 50 mm long
14S&F Stainless steel butt hinges size 100 mm for fixing WPC Door complete all as specified and as directed.
15S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
16S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
17S&F for 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed
18M&L for green marble work, 18 to 20mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like, set in neat cement slurry laid over and incldung 15mm thick screed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.
19S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all complete as per architectural drawings and as directed by Engineer-in-Charge.
20S&F of anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed by Engineer in- charge.
21S&F 4mm thick sheet glass ordinary quality black glass colour, white,frosted or multicolour fixed in aluminium window/Door/Partition includin rubber beading in square area exc 0.5 Sqm in each pane, complete all as specified and directed
22M&L for 2mm thick polymer natural / synthetic anti static flooring fire retardant compression moulding conductive flooring having electrical residence floor surface to earth between 50 kilo Ohms to 2 mega Ohms measured with wet electrode in accordance with details contained in STEC pamplet No 7 all as specified, fixed over and including copper strips grid work using 50mm x 0.5mm thick forming 0.9sqm grid, joints of copper strips, brazed on the existing surface including cleaning & preparation of surface by passing with the suitable adhesive. The copper grid shall be provided with diagonal earthing. The earthing resistance shall not exceed one ohm with and including copper strip work which shall be fixed to the existing floor at the 0.6m to 0.9m including removing existing PVC flooring etc. complete all as directed by Engr-in-Charge and as per manufacturer instructions.
23M&L for 4 mm thick ACP cladding, in wooden flush doors /WPC Doors/ steel doors and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed
24M&L for preparation of new previously untreated steel and iron surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
25M&L for preparation of old painted steel and iron surfaces of any description over 10 Cms in width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed.
26Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed
27M&L for 100 mm thick cement concrete type B2 (1:2:4) as in flooring, complete all as specified and directed
28M & L PCC (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed
29M&L for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in surface channels and drain, complete all as specified and directed.
30Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed
31M&L for brick work with subclass 'B' bricks (old size), straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.
32Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m, complete all as specified and directed
33M&L for rendering 15mm thick on fair faces of brick / concrete surfaces in CM (1:4), finished even and smooth without using extra cement (WPC to be measured and paid separately) complete all as specfified and directed.
34M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (with out using extra cement) complete all as specified and directed
35M&L for rendering 5 mm thick on ceilings in cement mortar 1:3 and finishing the surface even and smooth without using extra cement complete all as specified and directed
36M&L three coats of white wash on newly plastered surfaces of ceilings including preparation of surface complete all as specified and directed
37M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed
38M&L for preparation of new or old plastered surface of walls by using sand paper and applying two coats of oil bound distemper complete all as specified and directed
39M&L for complete removal of existing treatment from old decorated plastered surfaces of walls by Vacuum based sanding machine, removal of nails etc & filling cracks / hole with putty, applying wall care putty upto 2 mm thick (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured over a coat of approved primer by auto roller etc. complete all as specified and directed
40M&L for complete removal of old decorated surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed
41Chipping, removing carefullly concrete work by low impact hammer, breakar without damaging the structure i.e hard concrete should not be removed by force, cleaning and disposal of debries out side the premises etc. complete all as directed by Engr-in-Charge.
42M&L for Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry, complete all as directed by Engr-in-Charge.
43M&L for applying two coats of Epoxy based Zinc primer in a span of four hours over the treated rebars and allow to dry for six hours. The application shall be done by brush. Epoxy primer for steel of make / brand - Corroseal-ZR of Krishna Conchem or Dr. Fixit Epoxy zinc primer complete all as directed by Engr-in-Charge.
44M&L for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete & new concrete by brush application. Make / brand Monobond SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd. complete all as directed by Engr-in-Charge.
45M&L for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond-5Cement-15 sand) -in damaged areas in 30mm thickness including leveling profliling etc complete all as directed by Engr-in-Charge.
46M&L for applying concrete protection coating on finished structural members exposed to atmosphere make or brand IPNET of Krishna Conchem or New Coat from Dr. Fixit complete all as directed by Engr-in-Charge.
47M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under and as directed by Engr-in-Charge :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the crack with a liberal application of the epoxy putty.
48M&L for Injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency ,Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled etc. complete all as directed by Engr-in-Charge. Make / brand of Epoxy grout - Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout EI of STP Ltd.
49M&L for Injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including,Mixing of materialas:Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching.Grouting:Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100/Protectsil CIT or Ferogard 903. Maintain desired pressure in the gun by air compressor; maintain the pressureat exit (2 to 3kg/cm2) by monitoring pressure guage at exit. Grout the material has to be done through prefixed nozzles in the structural elements@ 100ml per nozzle and repeat the process for all the nozzles etc. complete all as directed by Engr-in-Charge.
50M&L Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips complete all as specified and directed by Engr-in-Charge.Note:-Replacement of steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel complete all as specified and directed.
51M& L for Mild Steel steel TMT bar of 5mm and over upto 10mm dia in or stirrups,spacers and binderd of designed diameter in various structural elements like column ,beams and foundations including drilling, bending, welding and fixing the bars with epoxy putty etc. complete (Steel provided on the basis of 1% of volume of concrete) complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information
52M& L for Mild Steel steel TMT bar of 5mm and over upto 10mm dia in or stirrups,spacers and binderd of designed diameter in various structural elements like column ,beams and foundations including drilling, bending, welding and fixing the bars with epoxy putty etc. complete (Steel provided on the basis of 1% of volume of concrete) complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58405731
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 44.49 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair Of Sbm-11 (Bldg No. P- 257) At Naval Station Karanja
Basic Detail
Tender No 8430/E8
Bidding Type Tender
Location
City Raigad
State Maharashtra
Key Dates
Publish Date 13 Nov 2026
Submission Date 28 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value 44.49 Lakhs
Tender Fee 500
EMD 88986
Exemption Available
Document List
79342130-6694-4c2f-a469-e5b930d2165c.html
8430TenderDocs.pdf
BOQ_894674.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 7 days
Nov 28, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 7 days
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

79342130-6694-4c2f-a469-e5b930d2165c.html

pdf

8430TenderDocs.pdf

xls

BOQ_894674.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender