Defence Statutory Bodies & Commissions/Committees Closing in 7 days TDR #58405729

Tender For Demolition And Re-Construction Of Bldg No P-289 (Canteen) With Associated Facilities At Naval Station Karanja

Issued by Statutory Bodies & Commissions/Committees · Raigad, Maharashtra
Tender Value
29.06 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
7 days left
EMD
58120
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Demolition And Re-Construction Of Bldg No P-289 (Canteen) With Associated Facilities At Naval Station Karanja

BOQ

Name of Work:- DEMOLITION AND RE-CONSTRUCTION OF BLDG NO P-289 (CANTEEN) WITH ASSOCIATED FACILITIES AT NAVAL STATION KARANJA
Sl. No. Item Description
1Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil, complete all as specified and directed
2Excavating post hole ( or similar holes each exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around with earth around in layers not exc 25 cm thick in hard/dense soil complete all as specified and directed
3M&L for cement concrete D-2 1:4:8 using 40mm graded crushed stone aggregate stone aggregate as in foundation, filling and mass concrete, in fencing pole complete all as specified and directed
4M&L for RCC (Design mix) M-30 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under- reamed piles and mass concrete complete all as specified and as directed.
5Use and waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter, fair finish surfaces, complete all as specified and as directed.
6M&L for TMT bars 10 mm and above, cut to length ,bent to shape required , including cranking , bending , spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and directed.
7M&L for TMT bars 6 mm to 8mm dia cut to length , bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and as directed
8S & F steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161 1979 grade St 240 complete all as specified and directed
9S&F for rolled sections of FE 410W (Gde-E-250)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all specified and directed.
10S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all specified and directed.
11Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls complete all as specified and directed
12S&F factory-Curved pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismanlting of old unserviceable sheet complete all as specified and directed
13S&F of 3 mm thick UPVC valley gutter of bottom width not less than 160 mm and height of not less than 100 mm with flow capacity of 16 Litres / metre complete all as specified and directed. Make: Euro Guard Hysquare (160 MM) of Euro Guard or equivalent
14S&F of UPVC Clamp with GI Handle for fixing 160 mm UPVC Gutter with roof truss. Required slope must be provided when installing of clamps enable to flow which locks the gutter inside the clip which prevents the edges from flipping out. GI Clamp must have minimum length of 23 cm of cross section of 32 mm x 8 mm and shall be fixed to UPVC Clamp using suitable screws complete all as specified and directed. Make: Euro Guard or equivalent
15S&F of CENTRE JOINT for joining 02 nos. 160 mm UPVC Gutter and shall provide an edgy effect to the gutter. It shall also have a length of 80 mm. It, shall ensure the level of the gutter. It shall lock the gutter inside the clip which prevents the edges from flipping out using silicone sealant inside the slot first and then slide the gutter inside it complete all as specified and directed. Make: Euro Guard or equivalent
16S&F CENTRE DROP fitting for 160 mm UPVC Gutter to outlet the water with a stopper with Outlet size of 90 mm (3 inches) round. It shall have a minimum length of 230 mm. It shall locks the gutter inside the clip which prevents the edges from flipping out Using silicone sealant inside the slot first and then slide the gutter inside it complete all as specified and directed.
17S&F END DROP fitting for 160 mm UPVC Gutter to outlet the water with a stopper with Outlet size of 90 mm (3 inches) round. It shall have a length of 192 mm. It shall locks the gutter inside the clip which prevents the edges from flipping out Using silicone sealant inside the slot first and then slide the gutter inside it complete all as specified and directed. Make: Euro Guard or equivalent
18M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in type B1 (1:2:4) and setting in cement & sand mortar 1:6 complete all as specified and as directed
19M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specfified and directed.
20M&L for matt finish ceramic coloured elevation wall tiles as in vertical surfaces 300x600x9-10mm thick set and jointed in cement slurry including with 10mm thick rendering in CM 1:3 on fair faces of brick work or concrete surface including dismentling of old tiles & backing coat complete all as specifed and directed by Engr-in-charge. Note :- Design/Pattern of Tile shall be approved by Engr-in-charge
21M&L for 10-12mm thick heavy duty anti skid vitrified tile for parking/ path (square / rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm as in floors etc, set in neat cement slurry and jointed in white /coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:4 including dismentling of old tiles & screed bed complete all as specifed and directed by Engr-in-charge.
22M&L for 20 mm thick Granite (of any type) slab, machine cut, bedded and jointed with neat grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and incldung 20 mm thick screed in cement motar 1:4 complete all as specified and directed.
23M&L for 20 mm thick granite slab, machine cut, as in skirting/ dado, set and jointed with neat grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and incldung 10 mm thick rendering in cement motar 1:4 complete all as specified and directed.
24M& L for providing edge moulding to 18-20mm thick granite / marble stone of any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed
25M&L for green marble work, 18 to 20mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like, set in neat cement slurry laid over and incldung15mm thick screed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.
26M&L for glazed ceramic colour designer concept glazed ceramic tiles in patches matching with existing tile 350x250x7mm or 450x350x7mm size as in walls, set and jointed in neat cement slurry, laid over and including 10mm thick backing coat in cement mortar 1:4 and pointed in coloured cement to match for work on vertical surface such as skirting dado etc complete complete all as specified and as directed by Engineer-in-Charge.
27M&L for non skid ceramic coloured tile 7 to 8mm thick (square / rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the tile, laid over and including 20mm thick screed bed in cement motar 1:4, set complete all as specified and directed by Engr-in-Charge.
28S&F of aluminium door / window / ventilator / partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading,screws etc, complete and also including powder coated aluminium fittings such as stainless steel hinges, tower bolts, hooks & eyes, peg stays and handles, concealed star lock for aluminium window, Mortice lock vertical type size 100mm 04 lever for door, rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window/ doors including connected items,with and including making good to the disturbed portion with its original specifications complete all as specified and directed.
29S&F 4mm thick sheet glass ordinary quality black glass colour, white,frosted or multicolour fixed in aluminium window / Door / Partition includin rubber beading in squarearea n exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
30S&F 4mm thick sheet glass ordinary quality black glass colour, white,frosted or multicolour fixed in aluminium window / Door / Partition includin rubber beading in square area exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
31Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed.
32Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube top & bottom rail mild steel frame shall be covered with heat moulded plain colour PVC “c” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed.
33S&F Stainless steel butt hinges size 100 mm suitable for fixing of WPC door complete all as specified and as directed.
34S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr in Charge.
35S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr in Charge.
36S&F CPVC water tubing outer dia 20mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface, along with primer & slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D 1785, fitting/ flanges shall be as per ASTM D2467, complete all as specified and directed by Engr-in-charge. Note for item no.36 & 37: Pipe & fittings has to be used under this item should have made from CPVC and shall be clearly marked the name manufacture & trade mark. Manufacturer test certificate (MTC) shall also be provided to Engr-in-Charge.
37S&F CPVC water tubing outer dia 25mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface, along with primer & slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D 1785, fitting/ flanges shall be as per ASTM D2467, in concealed and surface complete all as specified and directed by Engr-in-charge.
38M&L for cutting chases, pinning in, concrete block / brick / stone walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.
39M&L for 75mm bore, PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and direcetd.
40Supply and fixing of white vitreous china wash down water closet pan (Pedestal pattern) with and including P or S trap, including plastic seat cover closed pattern, fixing bolt etc. complete all as specified and directed.
41Supply and fixing of vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe,CI trap 100 mm Bore of pipe etc. complete all as specified and directed.
42Supply and fixing of Vitreous China half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc. complete all as specified and directed.
43Supply and fixing of PVC flushing cistern of 10 ltrs capacity with and including flush pipe & PVC connection of suitable length etc. complete all as specified and directed.
44Supply and fixing of vitreous china wash basin white, flat back size 550X400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe etc. complete all as specified and directed.
45S&F in repairs of 15 mm fancy type pillar taps cast copper alloy, with capstain head chromium plated screw down high pressure, with or without lettered HOT or Cold with long shanks and fly-nuts screwed for iron pipes and fixed including necessary small GI fittings etc. complete all as specified and directed.
46Supply and fixing of 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.
47Supply and fixing of 15 mm angle valve, stop cock, cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
48Supply and fixing of health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr in Charge
49Supply and fixing of CP toilet paper holder with stainless steel flap complete all as specified and directed by engr in charge
50Supply and fixing of 15mm size bib cock, two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed by Engr in charge.
51Supply and fixing of PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed
52Supply and fixing of designer bevelled edge looking mirror of selected quality glass of 6mm thick having four holes on corners fixed to walls with CP Brass screws with fancy type head top complete all as specified and directed by Engr-in-Charge.
53Supply and fixing of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid on wall or in trenches or in floors complete all as specified and directed
54S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid on wall or in trenches or in floors complete all as specified and directed
55S&F PVC (SWR) bends ISI marked any radius of 110 mm bore complete all as specified and directed.
56S&F PVC (SWR) bends ISI marked any radius of 75 mm bore complete all as specified and directed.
57S&F PVC (SWR) junction single (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed.
58Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and directed
59Removing excavated material exc 1.50 km and n. exc 5.0km and depositing where directed at a level n exc 1.5 m above the starting point for soils, complete all as specified and directed
60S&F of white glazed fine clay sink of size 750x450x250mm for kitchen or laboratories with plugs, waste coupling washer and wastes pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and as directed by Engineer-in-Charge.
61S&F of 15 mm bore three way tap in cast copper alloy fancy type with capstan heads, chromium plated, screwed down high pressure with long screws shanks and nut complete all as specified and directed.
62S&F of 2000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), three lyered, hoisted and fixed in position confirming to IS-12701-1996 including with 25mm dia brass water tank nipple complete all as specified and directed
63S&F of gun mental, globe or gate valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
64S&F of 25 mm size PVC float valve high pressure of PTMT with epoxy coated aluminium rod & hight density plastic ball, screwed for iron pipe or brass furred and fixed with fittings such as socket, nipple, union etc as required at site, complete all as specified and directed.
65S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.
66M&L for preparation of new previously untreated steel and iron surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
67Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed
68Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed
69Dismantling fencing wire mesh any type complete all as specified and as directed
70Dismentling of RCC Trellis work (Jafri), one way, including taking as under of battens in trellis (posts and rails measured separately), complete all as specified and directed
71Taking down wooden / aluminium chowkats or frames n .exc 1.5sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed
72Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed
73Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed
74Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.complete all as specified and directed
75Demolition of Cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
76Demolition of brick / stone masonry, built in cement mortar 1:6 including all quoined, arches, pillars & for ashlar facings.dressed stone work complete all as specified and directed.
77Demolition of reinforced cement concrete (reinforcement cut as required to facilitate) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed
78Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) under relevant item, complete all as specified and directed
79Taking down eaves gutters and rainwater pipes (any size or pattern ) including all fittings, complete all as specified and directed
80Taking up and down 15 mm bore steel tubing and connection including cleaning for re-fixing or removing to store complete all as specified and directed.
81Taking up and down 20 mm bore steel tubing and connection including cleaning for re-fixing or removing to store complete all as specified and directed.
82Taking down old unserviceable flushing cistern of any description and size complete all as specified and directed
83Dismantling W.C. Pan / WHB / Urinal of all sizes including disposal of dismantled materials including all malba complete all as directed by Engineer-in-Charge.
84Taking down unserviceable bib Tab, Pillar Tab,Two way tab, angle valve complete all as specified and directed
85Removing excavated / demolished material / old debries to distance exc. 1.50 km but n exc. 5 km including loading & unloading and depositing where directed, complete all as specified and as directed.
86M&L for concealed point wiring with 1.5 Sqmm single core, multi stranded copper conductor 1100 V grade, ISI marked, PVC insulated unsheathed cable (with approved colour code) FRLSH cable in CONCEALED PVC, ISI marked including all accessories as approved by EIC, with PVC 1.5 mm multi stranded insulated unsheathed FRLSH copper wire, ISI marked of green colour for continuous earth, including sunken box made out of suitable thick and not less than 60 mm in depth GI/MS/ pressed steel terminal box to be concealed in wall, duly painted including laminated hylum / maonite sheet cover thickness 3mm for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanized screw and cup washer complete all as specified and directed for the following-Note: Wiring to be done as per approved colour code. (a) One light/fan/ call bell point controlled by one switch
87(b) One 3 pin socket outlet 5 Amps on independent board
88(c) One 3 pin socket outlet 5 Amps on same board
89All as per item No. 86 above but with 4 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with Point FRLSH PVC 4 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board, complete all as specified and directed.
90Supply and fix modular switch 1 module 6 amp one way ISI marked complete all as specified and directed.
91Supply and fix modular switch 1 module 16 amp one way complete all as specified and directed
92Supply and fix modular socket 2 module universal type 5/6 amp one way complete all as specified and directed
93Supply and fix modular socket 2 module universal type 6/16 amp one way complete all as specified and directed
94Supply and fix Fan Regulator Fan step regulator, 120W - 2 module, complete all as specified and directed
95M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multi-stranded copper conductor FRLS cable of 6.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25mm dia, ISI marked including one run of PVC insulated unsheathed, multi-stranded copper conductor FRLS cable of 6.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in surface/ recess complete all as specified and directed.Note- Three run of 6 Sqmm PVC insulated copper wire and one run of PVC conduit shall be measured as one unit.
96Supply and fixing LED building security light fitting with suitable size bracket/angle with three core flexible wire to fit security light of 60 w IP 66 protection LED, complete all specified and directed
97Supply and fix LED batten with 20/22W four feet LED tube light fitting in wall / surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc surface and wall mounted LED batten, Engineering plastic batten with accessories complete all as specified and directed.
98S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 8 way complete all as specified and directed.
99S&F double door MCB VTPN DB 4 WAY made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 4 way all as specified and directed
100S&F of MCCB 4 Pole, 415 V, AC, C-curve, Adjustable type, 100 Amps with breaking capacity 25 KA complete all as specified and directed
101S&F 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series) complete all as specified and directed
102S&F RCBO 40 Amps SPN 240 V 10 KA (C-Series) complete all as specified and directed
103Supply and fixing of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 Volts, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE-5 star rated with brushless direct current motor (BLDC), complete all as specified and directed
104Supply & fixing, jointing, connecting & testing of 2 core 10 Sqmm XLPE/PVC insulated PVC sheathed cable, heavy duty 1100 volts grade, aluminum conductor, laid in trenches / ducts including taking out cable cover & cable complete all as specified and directed
105Supply & fixing, jointing, connecting & testing of 3.5 core 50 Sqmm XLPE/PVC insulated PVC sheathed cable, heavy duty 1100 volts grade, aluminum conductor, laid in trenches / ducts including taking out cable cover & cable complete all as specified and directed
106Supply & laying of 40-50 mm outer dia, SN-4, double wall corrugated (DWC) duct pipe conforming to IS 16205 (Part 24) with antirodent and non flame propagating properties of approved colour including with fittings & fixtures as in cable protection complete all as specified and as directed.
107Excavation in trenches in soft / loose soil n.exc 1.5m wide and n.exc 1.5m in depth and getting out complete all as specified and directed.
108Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.
109Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified.
110M&L for 50mm bore GI pipe light grade including with all fittings complete laid in trenches complete all as specified and directed.
111M&L for Road cutting for laying LT underground cable and making good the disturbed surfaces as per existing finish etc. complete all as directed by Engr-in-Charge
112Taking down carefully copper /aluminium point wiring (light, fan socket or power) through stove enameled steel conduit/PVC conduits including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, switch sockets, electrical fittings etc removing and making good disturbed surfaces of walls/ceiling etc, complete all as specified and directed
113Taking down carefully Sub-main wiring any size complete all as directed complete all as specified and directed.
114Taking out old unserviceable DBs any type & size including MCB/MCCBs/RCCBS complete all as specified and directed.
115Taking out old unserviceable LT UG cable any size complete all as specified and directed.
116Taking out old unserviceable bldg security light complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58405729
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 29.06 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Demolition And Re-Construction Of Bldg No P-289 (Canteen) With Associated Facilities At Naval Station Karanja
Basic Detail
Tender No 8443/E8
Bidding Type Tender
Location
City Raigad
State Maharashtra
Key Dates
Publish Date 05 Nov 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 29.06 Lakhs
Tender Fee 500
EMD 58120
Exemption Available
Document List
32ef29d9-26c8-4a66-8d74-319524a00b9f.html
8443TenderDocs.pdf
BOQ_894663.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

32ef29d9-26c8-4a66-8d74-319524a00b9f.html

pdf

8443TenderDocs.pdf

xls

BOQ_894663.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender