Tender For special Repair To Certain Bldgs At Chakkigam, Provn Of Sentry Post At Shumriyal And Provn Of Store Shelter At Pohrupet Under The Aor Of Ge 874 Ews.
Tender Value
34.74 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
22 days left
EMD
69500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Certain Bldgs At Chakkigam, Provn Of Sentry Post At Shumriyal And Provn Of Store Shelter At Pohrupet Under The Aor Of Ge 874 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat with shutters exc.1.5 Sqm but n exc.4 Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed. |
| 2 | Taking down chowkhat with shutters n. exc.1.5Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed. |
| 3 | S & F 2nd class soft wood plain solid straight chowkhats and frames wrought framed, rebated on the solid complete all as specified and directed. |
| 4 | S&F Plain, framed, panelled shutters second class soft wood 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkhats complete all as specified and directed. |
| 5 | S & F Glazed and skeleton shutters, second class soft wood 30 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed. |
| 6 | S&F 03 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified. |
| 7 | S&F 100 mm size mild steel butt hinges medium weight complete all as specified and directed. |
| 8 | S&F 75 mm size mild steel butt hinges medium weight complete all as specified and directed. |
| 9 | S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed. |
| 10 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 11 | S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 12 | S&F aluminium anodised alloy handles fabricated type 150mm size of handle. |
| 13 | S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed. |
| 14 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars & precast concrete masonry etc complete all as specified & directed. |
| 15 | M & L for brickwork with subclass 'B' bricks straight or curved on plan exc 6 m mean radius in CM (1:6) complete all as specified and directed. |
| 16 | M & L for 10mm thick rendering in Cement Mortar 1:4 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on brick or stone walls, complete all as specified and directed. |
| 17 | M & L for 15mm thick rendering in cement mortar 1:4 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on brick or stone walls, complete all as specified and directed. |
| 18 | Supply only integral water proofing complete all as specified and directed. |
| 19 | M&L for preparation new undecorated surface of walls and applying one coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 20 | M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper complete all as specified and directed. |
| 21 | Dismantling floor hearth or wall tilling including cement mortar bedding removing, rubbish of the premises complete all as specified and directed. |
| 22 | Demolition of cement concrete un reinforcement in ground floors and paving’s n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 23 | M & L for Cement concrete D-2, 1:4:8 Type 40 mm graded aggregate, 75 mm thick as in sub base over rammed earth complete all as specified and directed. |
| 24 | M & L for Cement concrete, 1:2:4, type B-1, using 12.50 mm graded stone aggregate, 25 mm thick as in sub base over rammed earth complete all as specified and directed. |
| 25 | M&L Glazed ceramic coloured tiles 600x450x7 MM thick, as in vertical surface such as in skirting and dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 26 | M & L for Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.06 sqm but n exc 0.11 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 27 | S&F in repair PVC connection 15mm dia and 450mm long with PTMT nuts and washer complete all as specified and directed. |
| 28 | S&F in repair bib taps cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed. |
| 29 | S&F in repair stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe complete all as specified and directed. |
| 30 | S&F in repair 1000 Ltr capacity PVC water storage tank (cylindrical vertical with closed top) and fixed in position all as specified in SSR Part -I complete all as specified and directed. |
| 31 | S&F in repair PTMT ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule 20mm dia complete all as specified and directed. |
| 32 | S&F in repair 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified and directed. |
| 33 | Supply & fixing Vitreous China Ware Wash hand basin white flat back of size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified and directed. |
| 34 | S&F Pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and as directed. |
| 35 | S & F Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe including providing and fixing plugs with and including 60mm long brass screws, pointing around urinal back in cement with PVC 32mm dia waste pipe & waste coupling including spreader complete all as specified and directed. |
| 36 | S&F in repairs two way angular stop cock chromium plated 15mm dia complete all as specified and directed. |
| 37 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 38 | S & F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed. |
| 39 | S&F in repair 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. |
| 40 | S & F in repair towel rail 450mm long of PTMT fixed with and including Chromium plated brass sand screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed. |
| 41 | Taking up or down 20mm dia GI steel tubing and connections, complete all as specified and as directed. |
| 42 | Taking up or down 15mm dia GI steel tubing and connections complete all as specified and as directed. |
| 43 | S&F in repair steel water tubing of nominal bore dia 15mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 44 | S&F steel water tubing of nominal bore dia 20mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 45 | M&L for lagging to 20mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe section of density 144 Kg \cum conforming to IS 9842 along with chicken mesh wire netting 25 gauge 20 mm mesh in repairs complete all as specified and directed. |
| 46 | S & F in repair bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed |
| 47 | S&F in repair 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access complete all as specified and directed. |
| 48 | S&F in repair for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed. |
| 49 | S&F in repair 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and directed. |
| 50 | S&F in Repair 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and directed. |
| 51 | S&F in repair PVC valveless, syphonic action type, low level PVC flushing cistern 10 ltr capacity white with flush pipe & all fitting complete all as specified and directed. |
| 52 | S&F in Repair vitreous China squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed. |
| 53 | S&F in repair for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed. |
| 54 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed. |
| 55 | S&F Pre-painted galvalume aluminium Zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed. |
| 56 | S & F in repair Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 57 | Dismantling of boarding of any description fitted in any position with nails complete all as specified and directed. |
| 58 | M & L for Plain fillets of exc. 3 & n exc. 6 Sqcm, IInd class soft wood square rectangular or triangular in section, clean swan, secured nails. |
| 59 | M&L plywood grade BWR type BB, 9 mm thick fixed with nails to timber frame work in ceiling complete all as specified and directed. |
| 60 | M&L for preparation of newly un treated surfaces and applying two coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and as directed. |
| 61 | Dismantling timber scantling 40 Sq cm and over in section in any position in unframed work complete all as specified and directed. |
| 62 | M & L second class soft wood in scantling clean swan complete all as specified and directed. |
| 63 | S&F in repair for Vitreous China urinal partition white of size 310x700 mm complete all as specified and directed. |
| 64 | Demolition reinforced Concrete work as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 65 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 66 | M&L for Providing precast cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in mortar complete with joints with cement mortar (1:3) to match complete all as specified and directed. |
| 67 | M&L for Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cum per sqm, and lightly tampered (area of flashings, etc., shall be added to the roof area). a) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 68 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection finished even and fair without using extra cement complete all as specified and directed. |
| 69 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 70 | M&L for mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde[1]E- 250) quality complete all as specified and directed. |
| 71 | M&L for preparation of newly surfaces of steel over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 72 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5m deep in any type of soil and getting out soft/loose soil complete all as specified and directed. |
| 73 | All as per item no 72 above but for additional 1.50m or there part of in depth beyond the first 1.50 mtr. |
| 74 | M & for PCC 1:4:8 type D2 (40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 75 | M & L for RCC M-30 design mix (20 mm Graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 76 | M & L for RCC M-30 design mix (20 mm Graded aggregate) in Columns, pillars, piers, posts and struts concrete complete all as specified and directed. |
| 77 | M & L for RCC M-30 design mix (20 mm Graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 78 | M & L for RCC M-30 design mix (20 mm Graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 79 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 80 | M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 81 | M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 82 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 83 | M & L for TMT mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 84 | M & L for 15 mm thick rendering on other fair faces of brick work or concrete surfaces in CM 1:6, rendering finishes even and smooth (without using extra cement) complete all as specified and directed. |
| 85 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, on external wall finished even and fair mixer with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacture and in the proportion indicated complete all as specified and directed. |
| 86 | M & L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in roof slab etc complete all as specified and directed. |
| 87 | M & L for preparation of newly plastered or un plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 88 | M & L for non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws of minimum size 605 x 605 mm as in ceiling complete all as specified and directed. |
| 89 | M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed |
| 90 | M L for preparing new plaster surfaces and non asbestos fibre cement building boards of ceiling and applying three coat of white wash complete all as specified and directed |
| 91 | M L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. |
| 92 | M&L for Machine cut Kota stone slab flooring 20-25mm thick over 15mm thick cement screed base laid in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 93 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado, pillar laid over 10mm cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 94 | M&L for cement concrete 40 mm thick, type B-1, 1:2:4 (20mm graded aggregate) as in floor finishes and even and smooth without using extra cement complete all as specified and directed. |
| 95 | M&L for hard drawn steel wire fabric dia 3.8 mm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement complete all as specified and directed. |
| 96 | M&L for mild steel work as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, of Fe-410-W (Gde E-250) quality A without any attachment complete all as specified and directed. |
| 97 | M&L for mild steel work as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc. including cleats, brackets, etc. of Fe-410-W (Gde E-250) quality A complete all as specified and directed. |
| 98 | M&L for applying two coats of synthetic enamel paint on new steel surfaces of any description not exc 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. |
| 99 | S & F MS work bands, straps, hold fasts and similar small articles conforming to Fe 290 Gde complete all as specified and directed. |
| 100 | S&F MS press handles 100 mm size cast type, anodised complete all as specified and directed. |
| 101 | M & L for 25mm thick 2nd class softwood boarding, planed one side, with butt joint fixed with nails in Fascia, eaves boarding complete all as specified and directed. |
| 102 | M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed. |
| 103 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed. |
| 104 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified |
| 105 | M&L for surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed. |
| 106 | Removing excavated material exc. 250mtr but n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and directed |
| 107 | M&L for mild steel work as in plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections and Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 108 | M&L for rendering 15mm thick plaster on external face of wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 109 | M&L plywood grade BWR type BB, 12 mm thick fixed with nails to timber frame work in ceiling complete all as specified and directed. |
| 110 | M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 111 | Material and labour for PCC (1:4:8), type D-2, 100 mm thick as in sub base of floor complete all as specified and directed. |
| 112 | S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 113 | S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 114 | S & F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed. |
| 115 | M&L for plain cement concrete (1:2:4), type B-1, using 12.5mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 116 | M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including conduit / casing caping (ISI marked) including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes made from thick sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc. covered with plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement fixing in surface mount or concealed including cutting chases to wall making good the disturbed surfaces to match with the existing specification and taking down old one complete all as specified and directed. |
| 117 | All as per item No 116 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board. |
| 118 | All as per item No 116 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board. |
| 119 | All as per item No 116 herein before but wiring with 2.5 sqmm copper wire (FR-LS-H) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. |
| 120 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 121 | S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed. |
| 122 | S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed. |
| 123 | S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 124 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.. |
| 125 | Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 126 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed. |
| 127 | S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 128 | M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed. |
| 129 | Supply and fix LED Bulb 9 Watt complete all as specified and directed. |
| 130 | S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 4 way/ 6 Way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 131 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series complete all as specified and directed. |
| 132 | S & F of MCB SPN, 240volt, 40 to 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. |
| 133 | M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. |
| 134 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and directed. |
| 135 | Supply and laying or fixing or passing through pipe with replacement and taking down old one, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section in service connections complete all as specified and directed. |
| 136 | Supply and fix CS mounted manual revolving search light LED type, white colour aluminium body operating voltage 230V, control gear type lamp wattage 250W, type of Lamp HPSV/MH maximum effective range 200 to 400 mtr complete all as specified and directed. |
| 137 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm nominal cross section in service connections complete all as specified and directed. |
| 138 | S&F Socket outlet 2 in 1, 3 pin, 5A, flush type complete all as specified and directed. |
| 139 | S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 140 | M&L for wiring for circuit/submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x6 sq. mm + 1x4 sq. mm earth wire complete all as specified and directed. |
| 141 | Taking up/down old unserviceable cable, supply, laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection of sizes 10 sqmm, 2.0 core complete all as specified and directed |
| 142 | Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed. Note:-Punned thickness only shall be measured and paid. |
| 143 | Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed. |
| 144 | Supplying and fixing, light grade, Galvanised mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps, bolts, nuts and washers complete all as specified and directed as for cable protection of sizes 40 mm bore complete all as specified and directed.:-. Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender