Tender For special Repair To Flooring & Other Connected Items At Cantt 35 And Addn/Altn To Toilet At Tulip & Orchid Guest Room Of Hq 101 Area At Shillong Cantt And Addn/Altn To Acoustic Wall Paneling At Raclh And Improvement Of Stage At Raclh Under G
Tender Value
48.46 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
19 days left
EMD
96920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Flooring & Other Connected Items At Cantt 35 And Addn/Altn To Toilet At Tulip & Orchid Guest Room Of Hq 101 Area At Shillong Cantt And Addn/Altn To Acoustic Wall Paneling At Raclh And Improvement Of Stage At Raclh Under Ge Shillong
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame)area n. exc 1.50 Sqm each with shutters complete all as specified and directed. |
| 3 | Demolition of Brickwork / solid concrete block work built in Cement mortar complete all as specified and directed. |
| 4 | Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital or similar pattern as in roof coverings complete all as specified and directed. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 6 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and directed. |
| 7 | Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and directed. |
| 8 | Dismantling boarding of any description fixed in any position with nails complete all as specified and directed. |
| 9 | Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and directed. |
| 10 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre using Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified to receive plaster of paris ceiling (Gypsum anhydrous board) complete all as specified and directed . |
| 11 | M&L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous board) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed. |
| 12 | M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed. |
| 13 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 14 | S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type fixed with screws to timber frame complete all as specified and directed. |
| 15 | S&F 1.5 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and directed. |
| 16 | S&F W-hinges 75 mm medium weight, stainless steel, and fixed complete all as specified and directed. |
| 17 | S&F W-hinges 125mm, medium weight, stainless steel, and fixed complete all as specified and directed. |
| 18 | S&F ball bearing / telescopic drawer channel of size 500 mm long complete all as specified and directed. |
| 19 | S&F 20 mm dia harrison rails, stainless steel chromiun plated including fixing of brackets stops, rollers etc all as specified and directed. |
| 20 | S&F for 20 mm dia brass chromium plated brackets complete all as specified and directed. |
| 21 | S&F 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and directed. |
| 22 | S&F 150mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and directed. |
| 23 | S&F extruded brass designer handles fabricated type anodised of size 300 mm complete all as specified and directed. |
| 24 | S&F extruded brass designer handles fabricated type anodised of size 150 mm complete all as specified and directed. |
| 25 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in complete all as specified and directed |
| 26 | S&F powder coated (Min thickness of powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and directed |
| 27 | S&F powder coated (powder coating min 50 micron) anodised two or three track sliding type window and ventilator shutters or side hung / without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and directed. |
| 28 | S&F Sheet glass, 5.50mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed. |
| 29 | M&L for 4.80 mm thick frosted sheet glass ordinary quality and glazing fixed to aluminium frame n. exc 0.50 sqm in each pane complete all as specified and directed. |
| 30 | M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 using cement concrete 1:3:6 Mix, Type C1 (Using 20 mm graded crushed stone aggregate) complete all as specified and directed. |
| 31 | M/L precast cement concrete block massonry with solid blocks not exc 10 cm in width and settings in CM 1:4 using cement concrete 1:3:6 Mix, Type C1 (Using 20 mm graded crushed stone aggregate) complete all as specified and directed. |
| 32 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tenssile strength of 550 Mpa as in roof covering / cladding including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, complete all as specified and directed. |
| 33 | S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tenssile strength of 550 Mpa as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed. |
| 34 | M & L for Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over and including a backing coat of 10mm thick screed in CM 1:4 complete all as specified and directed. |
| 35 | M&L for 25 mm thick Cement concrete 1:2:4 Mix, type B0 (Using 20mm graded crushed stone aggregate) used over sub base to recd floor tiles complete all as specified and directed |
| 36 | M&L for non skid ceremic white tiles 7 to 8mm thick area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 37 | M&L for 18/20mm thk granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and incl pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite over and including 20 mm thick cement screed bed in CM 1:4 complete all as specified and directed. |
| 38 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking plateform, and other similar situation complete all as specified and directed. |
| 39 | Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed. |
| 40 | M&L for rendering 10mm (cement mortar 1:6) thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified and directed. |
| 41 | M&L for rendering 15m thick on fair faces of lathing wall in CM 1:4 finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed.Note: Water proofing compound shall be measured and paid separately under respective item of BOQ. |
| 42 | Supply only Integral waterproofing compound (Powder) complete all as specified and directed. |
| 43 | S&F bevelled edge looking mirror of selected quality glass, mounted on chromium plated brass holder's and screws or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 44 | S&F Bib taps, cast copper alloy, CP, fancy type 15mm bore , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 45 | S&F stainless steel gratings 100mm bore size fixed with cement mortar complete all as specified and directed . |
| 46 | S&F for 12mm thick toughned glass as in bathroom partitions including one hinged door, partition fixed with floors and wall , including one openable door with self closing arrangement fixed with stainless steel connectors to glass and similar work including cutting to shape, drilling holes and fixing with single leg spider , ceiling/bottom SS 304 connectors wall to glass and glass to glass of required sizes , all necessary fittings upto all height incl scaffolding complete all as specified and directed. |
| 47 | Supply and fix brass extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed (ISI Marked) complete all as specified and as directed. |
| 48 | S&F Infinity white shower panels of size 1500x200mm shower panel without thermostate mixer in white glass finish and with wall mixer function, incl 1.20mtr hand shower with fles tube (Jaquar Cat Part No-SHP-WHT-G0843JAX or equivalent in Cera / Hindware/ Parryware) fixed complete all as specified and directed. |
| 49 | S&F Vitreous china table top basin - white matt , Kubix prime range of Jaguar of size 600x440x150mm including 32 mm waste coupling with chromium plated bottle trap (Jaquar Cat part No-KUS-WHM-35931PM or equivalent in Cera/ Hindware/ Parryware) complete all as specified and directed. |
| 50 | S&F 15 mm bore CP Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook including making connections and fixed in position of make Jaquar Cat Part No:- ALD-CHR-573 or equivalent in Cera / Hindware/ Parryware complete all as specified and directed. |
| 51 | S&F single lever Basin mixer with Single Lever Tall Boy with 155mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses of make Jaquar Cat Part No:- KUP-CHR-35005BPM or equivalent in Cera / Hindware/ Parryware complete all as specified and as directed. |
| 52 | S&F CP single function over head shower square shape maze of size 300x300mm of make Jaquar cat part No:OHS-CHR-1639 with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Cera / Hindware/ Parryware complete all as specified and as directed. |
| 53 | S&F CP single lever wall mixer 3-in-1 system with provision for both hand shower & overhead shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-CHR-15125PM or equivalent in Cera / Hindware/ Parryware complete all as specified and as directed. |
| 54 | S&F CP Jaquar Multifunction Round Hand Shower of 120mm dia High-Pressure Handheld Shower Head with Multiple Spray Modes with flexible shower tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Cera / Hindware/ Parryware complete all as specified and as directed. |
| 55 | S&F for CP Continental Double Arm Wall Mounted Reversible Plain/ Magnifying (3X) Pivotal Mirror of make Jaquar cat part No:ACN-CHR-1193N or equivalent in Cera / Hindware/ Parryware complete all as specified and as directed. |
| 56 | S&F Twin-in-one bib taps, cast copper alloy fancy type 15mm bore , screwed down, screwed for iron pipe or for brass ferrule of make Jaquar or equivalent in Cera / Hindware/ Parryware complete all as specified and as directed. |
| 57 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 58 | S&F glass corner shelf with bracket of (Jaguar Cat Part No CAN-CHR-1173 or equivalent in Cera/ Parryware/ Hindware) all specified and directed |
| 59 | S&F Soap dish holder with bracket of (Jaguar Cat Part No AKP-CHR-35731P or equivalent in Cera/ Parryware/ Hindware) all specified and directed |
| 60 | S & F Towel rack 600mm long with lower hangers , stainless steel complete all as specified and as directed. Make: Jaquar Cat Part No-AKP-35781PS or equivalent Cera/ Hindware/ Parryware. |
| 61 | S & F Towel ring, stainless steel complete all as specified and as directed. Make:Jaquar Cat Part No-AKP-CHR-35721P or equivalent Cera/ Hindware/ Parryware. |
| 62 | S & F Toilet paper roll holder ,stainless steel complete all as specified and as directed. Make: Jaquar Cat Part No-AKP-CHR-35753PS or equivalent Cera/ Hindware/ Parryware. |
| 63 | S & F Vitreous China rimless single piece desgin WC including seat cover closed and flushing cistern with siphonic effect, tornado flushing , dual flush-2.6/4.6 LPF, anti germ glaze pattern single piece size 360x675x750mm complete all as specified and as directed. (Make: Jaquar Cat Part No- OPS-WHT-15853 S300UF or equivalent in Cera/ Hindware/ Parryware). |
| 64 | M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 65 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 66 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 67 | S&F PVC (SWR) bends 110mm dia complete all as specified and directed |
| 68 | S&F PVC (SWR) bends 75mm dia complete all as specified and directed |
| 69 | S&F PVC(SWR) 75mm dia vent cowls complete all as specified and directed. |
| 70 | S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and directed. |
| 71 | Dismantling water tanks exc 250 ltrs but not exc 500 ltrs capacity , complete all as specified and directed. |
| 72 | Supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float ball brass valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for iron pipe and fixed all as specified and directed. |
| 73 | M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 74 | Taking up or down steel tubing and connections, for 15mm bore of pipes complete all as specified and directed. |
| 75 | Taking up or down steel tubing and connections, for 20mm bore of pipes complete all as specified and directed. |
| 76 | Supply and Laying of CPVC 16mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 77 | Supply and Laying of CPVC 20mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 78 | S&F stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle 15mm dia complete all as specified and directed |
| 79 | S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 80 | M&L for 100mm thick cement concrete 1:4:8 Mix, Type D2, (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 81 | M & L for 100mm thick PCC, 1:2:4 Mix, type B-1 (using 20mm graded crushed stone aggregate) as in subfloors finished even and rough without using extra cement complete all as specified and directed. |
| 82 | M&L for 75 mm thick cement concrete 1:3:6 Mix, type C-2 (using 40mm graded crushed stone agg) as in plinth protection finished even and smooth without using extra cement incl necessary joint filling with mixture of paving bitumen & sand in 1:3 complete all as specified and directed. |
| 83 | S&F MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed. |
| 84 | Complete removal existing treatment and applying 1mm thick of white wall care putty or cement paste to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of primer complete all as specified and directed. |
| 85 | M & L for preparation of new plastered/concrete surfaces of walls, providing 1 mm thick of white wall care putty or cement paste to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of primer complete all as specified and directed. |
| 86 | M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed. |
| 87 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 88 | M&L for preparation of new plastered/concrete surfaces of walls and priming with alkali resistant primer paint and applying two coats of weather coat exterior paint with roller etc complete all as specified and directed. |
| 89 | S&F fro 40mm thick 2nd class hardwood clean sawn boards or planks, width n exc. 20 cm for wooden flooring etc all as specified. |
| 90 | M&L for preparation of new or treated wooden surafces and applying two or more coats of French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works comcplete all as specified and diretced |
| 91 | Fixing only second class hard wood in scantlings framed and fixed complete all as specified and directed |
| 92 | Dismantling timber fillets, rails, posts rafter purlins, etc., under 40 Sqcm in sectional area complete all as specified and directed |
| 93 | M&L 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc. 13 & n. exc. 25 Sqcm complete all as specified and directed. |
| 94 | S&F 35 mm thick 2nd class hard wood plain framed panneled shutter any number of panels with panel of 9mmB.W.P. commerical play flat on both side with feather edged complete all as specified and directed |
| 95 | S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and directed. |
| 96 | S&F Extruded Aluminium, anodised, bow handles of size 150mm complete all as specified and directed. |
| 97 | S&F aluminium anodised barrel bolts and fixed of 200 mm length complete all as specified and directed. |
| 98 | Complete removal of existing treatment on wall/ceiling/concrete surfaces with Washing, rubbing, down and stopping of distempered and painted surfaces complete all as specified and directed. |
| 99 | M&L for preparation of surfaces of wall and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 100 | M & L for preparation of surfaces of wall and applying two coat of oil bound distemper with roller on old treated surface of wall etc complete all as specified and directed. |
| 101 | M&L for complete removal of existing treatment of surface and applying two or more coats of 100% preminium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon addittives @ 1.43 litre/10 sqm over and incl priming coat of exteriror primer @ 0.90 / 10 sqm over new surfaces complete all as specified and directed. |
| 102 | M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed. |
| 103 | M&L for preparation of old wooden Surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint complete all as specified and directed. |
| 104 | S&F 4 mm thick plain sheet glass and glazing , in square n.exc 0.5 Sqm in each pane, complete all as specified and directed. |
| 105 | S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 106 | S&F for PVC (SWR) pipes (half round of 150 mm with rounded edges) as eaves gutters incluing fixing asscessories as clip/cleats/rubber ring joints with regular interval of 2 mtr, single socketed complete all as specified and directed. |
| 107 | S&F for 150 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fix in eaves gutter as vertical complete all as specified and directed by Engr -in- charge |
| 108 | S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and directed. |
| 109 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawings. |
| 110 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 111 | Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as specified and directed |
| 112 | M &L glazed skeleton hardwood shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc 35mm thick of 2nd class hard wood complete all as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 113 | S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm complete all as specified and directed. |
| 114 | S&F Extruded Aluminium, anodised, bow handles of size 100mm complete all as specified and directed. |
| 115 | S&F aluminium anodised barrel bolts and fixed of 100 mm length complete all as specified and directed. |
| 116 | M&L for 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed. |
| 117 | M&L for rendering 15mm thick on fair faces of lathing wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 118 | M & L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 119 | M&L for 75 mm thick cement concrete 1:4:8 Mix, Type D2, (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 120 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 121 | M&L for Non skid light shade, joint free ceramic tiles, 7 to 8 mm thick square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 122 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and directed . |
| 123 | M&L for 4mm thick non asbestos fiber cement building boards 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed. |
| 124 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 125 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10mm thick Rendering in CM 1:4 complete all as specified and directed. |
| 126 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed. |
| 127 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soft loose soil complete all as specified and directed. |
| 128 | M & L for broken brick, Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 129 | M&L for PCC 1:2:4 Mix, B-1 (using 20mm graded crushed stone aggregate) as in coping including necessary form work as required complete all as specified and directed. |
| 130 | M&L for paving vitrified ceramic colour tiles (heavy duty tile)of size 400 mm x 400 mm x 10 mm thick as in path etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and directed. |
| 131 | S&F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 132 | S&F stainless steel three self pullout basket of size 150x485x530mm complete all as specified and directed. |
| 133 | S&F plain stainless steel basket of size 520x485x200mm complete all as specified and directed. |
| 134 | S&F plain stainless steel plate basket of size 520x485x200mm complete all as specified and directed. |
| 135 | S&F plain stainless steel cup & saucer basket of size 520x485x100mm complete all as specified and directed. |
| 136 | S&F plain stainless steel perforated cutlery basket of size 520x485x100mm complete all as specified and directed. |
| 137 | S&F plain stainless steel grain trolley of size 520x485x350mm complete all as specified and directed. |
| 138 | Supply and fix Continuous (Piano) hinges, stainless steel, bright finish or electrogalvanised width of flaps 30 mm (when open) complete all as specified and as directed. |
| 139 | Supply and fix Extruded brass bow handles, of 125 mm size, fabricated type, polished complete all as specified and directed |
| 140 | Supply and fix Extruded brass bow handles, of 150 mm size, fabricated type, polished complete all as specified and directed |
| 141 | M & L for PCC 1:3:6 Mix, type C2 (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified & directed. |
| 142 | M&L for 9 mm plywood,grade BWR, type BB, Fixed with screws to timber frame work complete all as specified and directed. |
| 143 | S & F for Acoustic wall panel, 9 mm to 12mm thick polyester Fiber board ,customized CNC Cutting, density 180kg -200kg /Cum fire Rating Class B1 complete all as specified and directed. |
| 144 | S&F for 10/15mm thick interior WPC wall panel louvers for interior use fixed complete all as specified and directed. |
| 145 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed |
| 146 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles area exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed |
| 147 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles area exceeding 0.42 sqm but not exceeding 1.00 sqm, in vertical surfaces such as dado / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed |
| 148 | M&L for 12 mm plywood,grade BWR, type BB, Fixed with screws to timber frame work complete all as specified and directed. |
| 149 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch. |
| 150 | Description all as per Srl item No. 149 here in before but for socket outlet point 5 Amp on Independent board complete all as specified and directed. |
| 151 | Description all as per serial item No 149 here in before but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and directed. |
| 152 | Supply and fixing modular switch 1 way 6 A with cover plate and frame 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 153 | Supply and fixing modular switch 1 way 16 A with cover plate and frame230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 154 | Supply and fixing modular sockets with cover plate and frame 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 155 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with cover plate and frame 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 156 | Supply & fixing 12W Recess fittinge Round LED Down light with Extruded aluminium Housing, PC Diffuser, LED life span > 50000 burning hours, CCT-6000K/4000K/3000K (Cool white/Natural White/Warm White) Lumen efficacy 110Lm/105 Lm/1000 Lm Lumens per watt, CRI>80, Driver Efficiency>85% over voltage Protection upto 440V/AC for 4 years. Surge Protection 4 KV, IP20, IK02, Jaquar Cat No. LLCN01R012XC/XN/XW. complete all as specified and directed. |
| 157 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type warm/white colour with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 158 | S&F lamp holder, insulated body, with back plate for batten fitting complete all as specified and directed. |
| 159 | Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one complete all as specified and directed. |
| 160 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed. |
| 161 | S & F Exhaust fan 230 volts , 250mm, plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and directed. |
| 162 | Taking Down of existing Geyser depositing to store and refixing the same after completion of repair work complete all as specified and directed. |
| 163 | Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and directed. |
| 164 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, including 20 mm casing caping PVC on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild galvanised sunken box/metal flush box made out of 1.6 mm thick galvanised sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including accessories including making good the disturbed surfaces as per existing for one light point controlled by one switch complete all as specified and directed. |
| 165 | Description all as per Srl item No 164 here in before but for bell point control by one, one way switch complete all as specified and directed. |
| 166 | Description all as per Srl item No 164 here in before but for socket outlet point 5 Amp on same board complete all as specified and directed. |
| 167 | Description all as per Srl item No. 164 here in before but for socket outlet point 5 Amp on Independent board complete all as specified and directed. |
| 168 | Description all as per serial item No 164 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and directed. |
| 169 | Supply and fixing Bell push, flush type, 5 amp 1 way 6 A module 230/250 volt with frame and cover complete , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 170 | Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. |
| 171 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp warm/white colour and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and directed. |
| 172 | Supply and fixing wall decorative LED spot light fitting with lamp 10 Watt warm/white colour Aluminium housing complete with necessary connection including taking down old unserviceable light fittings complete all as specified and directed. |
| 173 | S&F Bedside Wall Light Light, Grey PHILIPS 919215850141 2W, warm/white colour / complete all as specified and directed. |
| 174 | Supply and fixing round/rectangular shape 12 watt 220 volts AC , warm/white colour surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and direcetd. |
| 175 | Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 176 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed |
| 177 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.complete all as specified and directed |
| 178 | M & L for testing, instatllation, commissioning of Kitchen Exhaust System Filter Less and Dry Heat Clean Technology | Matt Black Finish, Hassle free Filter Less and Dry Heat Auto Clean Technology, Thermostatic Touch Control Panel with 3 Speed Gesture Motion, including, Matt Black Finish, Black Metal Oil Collector,Motor with Copper Winding, Black Glass Clad Hood with LED Insignia, Front Panel with Black Glass, Energy Saving LED Light,Metal Blower + Metal Housing, Designed Air Flow (max): 1250 Nm3/h, Noise Level: 58 dBA (max), Lifetime Warranty, Size: 90 Cm complete all Civil work for fixing system, , make hole and replastering existing wall with wall colour coding with Basic Civil work required including fixing of Duct and complete Electrical wiring. as reqruied for system running complete all as specified and directed. |
| 179 | Supply and fixing submain wiring for DBs/ Power Point, two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing caping (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. |
| 180 | Supply & fixing in repair Garden light/LED Bollard LED light fitting , warm/white colour llumitz Bollard of capacity 8 W die-cast aluminium body, 10 watt LED toughened glass complete with all accessories incl taking out old unserviceable one complete all as specified and directed. Make - Jaquar cat part No. LBLDO3R108XW or equivalent in havells/ Bajaj |
| 181 | Supply & fixing Gate light Orbiss Gate top ED light fitting of capacity 12 W, warm/white colour die-cast aluminium body, complete with all accessories incl taking out old unserviceable one complete all as specified and directed. Make Jaquar Cat part No. LGTP01X012XW or equivalent in Havells/ Bajaj. |
| 182 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core Iincluding laying in trench or fixed on wall through clamps complete all as specified and directed . |
| 183 | Excavation in trenches not exc 1.5 m wde and 1.5 m deep for taking out/laying of UG cable/GI pipe of any dismeter in soft/loose soil and getting out complete all as specified and directed |
| 184 | Returning and filling including spreadking levelling watering and well ramming in layers not exc 25 cm thick soft/loose soil complete all as specified and directed |
| 185 | M & L for sand filing in treances for providing sand cushion for protection of UG cable complete all as specified and directed. Note: Thickness of sand shall be measured after punning. |
| 186 | Supply and laying of sub class B bricks locally available alying perpendicular of UG cable complete all as specified and directed. |
| 187 | Note for all items: If in BOQ, any item found repeated and contractor quotes different rates for the same, the lesser rate quoted by the contractor shall be admissible for payment and no claim of contractor, whatsoever, on this account shall be entertained by the Department. NOTE FOR ALL ITEMSIn case in BOQ any item found repeated and contractor quotes different rate for the same, the rate quoted on lesser side shall only be applicable for payment and no claim whatsoever on this account shall be entertained by the Department. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender