Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #58405719

Tender For Day To Day Maintenance & Repair To Plumbing, Sanitary Fitting, Leakage, Seepage, Sunken Portion, Floor/Wall Tiling And Miscellaneous Work At Drde Gwalior Under Ge (I) R&D Delhi.

Issued by Statutory Bodies & Commissions/Committees · Gwalior, Madhya Pradesh
Tender Value
38.12 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
76240
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Day To Day Maintenance & Repair To Plumbing, Sanitary Fitting, Leakage, Seepage, Sunken Portion, Floor/Wall Tiling And Miscellaneous Work At Drde Gwalior Under Ge (I) R&D Delhi.

BOQ

Name of Work:- DAY TO DAY MAINTENANCE & REPAIR TO PLUMBING, SANITARY FITTING, LEAKAGE, SEEPAGE, SUNKEN PORTION, FLOOR/WALL TILING AND MISCELLANEOUS WORK AT DRDE GWALIOR UNDER GE (I) R&D DELHI.
Sl. No. Item Description
1M&L for Repair and mending of leakage in 15mm bib tap, pillar tap, stop cock, angle stop cock etc of any description includig replacement of internal fitting of requisite pattern and size.
2S&F in repairs PVC connection 15mm size 450mm long with 2 Nos PTMT end nuts with washer.
3S&F in repairs brass chromium plated shower rose with swivel joints, 125mm diameter, including fixing to steel pipe or union.
4S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipes. (Minimum weight 90gms)
5S&F in repairs 15mm diameter cast copper alloy chromium plated long body fancy type bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
6S&F in repairs 15mm diameter cast copper alloy chromium plated bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
7S&F in repair 15mm diameter chromium plated cast copper alloy fancy type pillar taps with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flyuts, screwed for iron pipe.
8S&F in repairs 15 mm diameter chromium plated cast copper alloy stop valves, fancy type with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions including dismantling, taking out from wall as required and making good dismantled portion of wall to match with the existing surface.
9S&F in repairs 15mm diameter chromium plated cast copper alloy stop valves, angle type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.
10S&F in repairs 15mm diameter ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 142gms)
11S&F in repairs 20mm diameter ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210gms)
12S&F in repairs 32mm diameter waste fittings brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement.
13S&F in repairs 40mm diameter waste fittings brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement.
14S&F in repairs small galvanised iron fittings (ISI Marked) such as socket, elbow, nipple, tee, union etc for 15mm bore pipe.
15S&F in repairs small galvanised iron fittings (ISI Marked) such as socket, elbow, nipple, tee, union etc for 20mm bore pipe or 15mm x 20mm reducers.
16S&F in repairs 32mm diameter ribbed PVC waste drain pipe for WHB, urinal etc, strached length 90cm with PVC coupling socket.
17S&F in repairs 40mm diameter ribbed PVC waste drain pipe for sink, strached length 90cm with PVC coupling socket.
18S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, brackets, PVC flushing pipe inclduing connecting to WC.
19S&F in repairs flush pipe of polyethylene with rubber cone for low level flushing cistern including jointing to WC.
20S&F in repairs internal fitting (PVC syphon kit) with handle complete for low level PVC flushing cistern.
21S&F in repairs chromium plated butterfly spray jet for EWC with 1m long flexible tube provided with end nut and washer.
22S&F in repair vitreous China wash basin, white, flat back, size 550 x 400mm including CI/MS brackets including cutting for and pinning in ends of brackets or erecting stand.
23S&F in repairs brass chromium plated bottle traps for wash basins with inlet and outlet screwed for 32mm pipe or connections including necessary packing, union and cap.
24S&F in repairs stainless steel grating 125mm diameter with or without hole for waste pipe, fixed on floor/ nahani trap with cement morter.
25S&F in repairs plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated or PVC hanging device.
26S&F in repairs vitreous china wash down water closet pan (pedeastal pattern) white including fixing bolts, connection to drain (or outgoing pipe) and flushing pipe etc.
27M&L for opening of air lock/ blockage in GI pipe line from service water tank to internal GI pipes/ fittings for smooth flow of water to bib taps/ showers/ pillar tap/ stop valves complete by application of pressure pump/ gravity pressure.
28Attending plumber complaints and rectifying defects such as leakage from flushing cistern down pipe, flush handle, PVC connection, stop valves, leakage of taps, mixer, mixer, stop cocks, leakage in GI pipe line fittings, water tanks/over flow from inlet & outlets and repair in portion including providing all type of washers, and minor accessories (upto 2 No. items in each bldg.)
29Attending carpenter complaints such as tightening of loose door/ window/ cup board hinges, re-fixing of loose sliding bolts/ tower bolts/ handles, resecuring of loose pelmet and curtain rods/ brackets and repairing in position including providing all type of screws, nails and necessary minor accessories (upto 5 No. items in each bldg.)
30M&L for 6mm thick commercial face plywood, grade BWR type BB including two coats of synthetic enamel paint over a coat of pink primer on one face, fixed with screws in repair.
31S&F in repair cord drawn veniation blinds (10 cm wide vertical polyester stripes of approved colour) consisting of aluminium head rail, traverse cord, tilt mechanism complete. (overall size to be measured)
32Resecuring, easing or adjusting without taking down door/ windows shutters not exceeding 1 Sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws.
33Resecuring, easing or adjusting without taking down door/ windows shutters exceeding 1 Sqm but not exceeding 2 sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws.
34S&F in repairs 300 mm long aluminum alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy.
35M&L in repairs aluminium sheeting 0.56 mm thick cut to required size fixed to wooden shutters with CP screw or brass/ stianless steel pins (measured as the minimum rectangle from which the pieces can be cut)
36S&F in repairs anodised aluminium alloy body door stopper and rubber shoe, overall length of cover plate 140mm.
37M&L for resecuring glass of any description in existing steel frame with putty including removing and raking out old putty.
38S&F in repairs 20mm diameter brass chromium plated tubular towel rail 60mm long including brackets.
39S&F in repairs 125mm size extruded aluminium alloy handles, fabricated type, anodised.
40S&F in repairs 200mm size aluminium anodised barrel tower bolts of extruded section.
41S&F in repairs 100mm size aluminium anodised hasp and stapple safety type including bolt to hinge plate fixed with screws.
42S&F in repairs 100mm size steel or malleable cast iron handles, handles suitable for steel windows.
43S&F in repair 100mm mild steel butt hinges medium weight cold rolled.
44S&F in repair 75mm mild steel butt hinges medium weight cold rolled.
45S&F in repair chromium plated health faucet with 1 m tube and hanging hook.
46Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.
47M&L for Granite 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in CM (1:4).
48Rounding to edges of stone slabs one edge, such as in steps and other similar situations.
49Taking up down steel tubing and connections 15mm bore including cleaning for re-fixing or removal from site.
50Taking up down steel tubing and connections 20mm bore including cleaning for re-fixing or removal from site.
5115mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors.
5220mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors.
53Cutting chases in brick walls, pinning in making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth
54Dismantling water tanks exceeding 250 and not exceeding 500 ltr capacity.
55Dismantling water tanks exceeding 500 and not exceeding 1000 ltr capacity.
56S&F rotational moulded polythylene water storage tank 500 ltr capacity, cylendrical vertical with closed top, hoisted and fixed in position all as specified.
57S&F rotational moulded polythylene water storage tank 1000 ltr capacity, cylendrical vertical with closed top, hoisted and fixed in position all as specified.
58Demolition of cement concrete in ground floors and pavings etc not exceeding 15cm thick above or below ground level.
59M&L Providing 75mm thick cement concrete (1:3:6), type C-2 (40mm graded aggregate) finished even and smooth without using cement extra cement.
60M&L Providing 75mm thick cement concrete type (1:4:8), D-2 (40mm graded aggregate) in sub base.
61Dismanting floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises.
62M&L Non - skid joint free ceramic tiles 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6).
63M&L Non-skid joint free ceramic tiles skirting cut out of 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4).
64M&L Non-skid joint free ceramic tiles 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6).
65S&F in repairs 100mm long anodised aluminium handles, cast or extruded type for alluminum windows.
66S&F in repairs stainless steel wire cloth 0.36mm nominal diameter of wire and average width of aperture 1.40mm, fixed with stainless steel wire staple etc in wooden or steel frames.
67Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames glazed with putty or fixed with beads.
68M&L 3mm thick sheet glass not exceeding 0.50 sqm in each pane fixed with and including provision of wooden beads or putty in wooden or metal frames.
69M&L 5.5mm thick sheet glass of any plain or tinted, ordinary quality and glazing with exising snap beading and new rubber neoprene packing in aluminium frames including taking out old broken glass.
70S&F in repair door closer hydraulically regulated, aluminium body designation No. 3, universal type, suitable for door shutter of 851mm to 1000mm in width and weight between 61Kg to 80Kg.
71M&L Aluminium frame door seal bottom nylon brush with upto 94cm long suitable to cover gaps upto 20mm to fit any type of doors.
72S&F in repairs 600mm x 450mm x 5mm thick bevelled edge mirror of selected quality glass with aluminium frame of channel alround mounted on 4mm thick commercial ply or AC building board fitted to wooden plug with CP brass screws.
73M&L Welding in repairs, thickness of metal to be welded n exc 6mm in any situation and on any floor. (welding in length less than 10cm to be measured as 10 running cm)
74M&L Repair aluminium door and window shutters by taking down shutter from frame, opening out joints, taking out glass or panels of any description, replacing the corner piece wherever required, joining and assembling again, refixing the glass pane and panels by provision of new rubber neoprene packing.
75S&F in repair mortice lock, verticle type of brass complete size 75mm and 4 levers for aluminium doors.
76S&F in repair urinal spreader of PTMT any colour for fixing with 15mm diameter pipe (Minimun weight 60 gms).
77M&L Demolition of brick work built in cement mortar or cement lime mortar.
78M&L for brick work with sub-class 'B' bricks straight or curved on plan exceeding 6mm mean radius built in CM (1:6).
79Taking down cement plaster in patches not exceeding 3sqm each on brick walls or ceiling etc. raking out joints hacking for key, scrubbing down with water etc.
80M&L Rendering 15mm thick in patches not exceeding 3sqm each in CM (1:6) on brick walls or concrete surface, finished even and smooth without using extra cement.
81M&L Rendering 15mm thick in CM (1:4) in patches not exceeding 3sqm each on brick walls or concrete surface, finished even and smooth without using extra cement.
82M&L Rendering 10mm thick in CM (1:4) in patches not exceeding 3 Sqm each on brick or concrete surface in ceiling, finished even and smooth without using extra cement.
83M&L Preparing newly plastered surfaces of ceiling and two coats of white wash paint.
84M&LPreparing newly plastered surfaces of walls and two coats of cement base paint.
85M&LPreparing newly plastered surfaces of walls and two coats of distemper oil emulsion over a coat of chalk whiting.
86Fixing only in repairs kitchen sinks with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets andconnecting union to waste pipe.
87Taking down PVC soil, waste and rainwater pipes (any size or pattern), including all fittings, shoes, bends etc. (measured overall as fixed along the centre line over fittings and accessories)
88S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls.
89S&F 110mm bore PVC (SWR) bends any radius.
90S&F in repairs powder coated aluminium alloy drapary (curtain) rod 25mm diameter fancy type with fixing brackets, end cap studs complete.
91Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.
92M&L for point wiring with 1.5 sqmm multi stranded PVC FRLS insulated unseathed copper conductor cable FRLS and including concealed PVC conduit of size 20mm for one light point or fan point or bell point controlled by one switch including PVC insulated unsheathed 1.5 Sqmm copper conductor FRLS continuous earth wire and connecting with earth dolly and making good the distrubed surfaces matching with existing specifications complete all as specified and as directed.
93M&L for point wiring for 3 pin socket outlet, 5A, independent, but below the switch boarch of light points in the same vertical plane with 2.5 sqmm multi stranded PVC insulated unsheathed copper conductor FRLS cable in and including PVC conduit of size 20mm diameter plasitc laminated sheet 3mm thick including PVC insulated unsheathed 2.5 Sqmm copper FRLS conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specification complete all as specified and as directed.
94M&L in replacement Sub main wiring in repairs with two single core PVC FRLS insulated cable 4 sqmm (Nominal diameter) copper conductor multistrand and drawing in and including S&F PVC concealed conduit 25 mm diameter ISI marked, 2.5 sqmm multistrand copper conductor PVC FRLS green unsheathed cablefor earth continuity complete all as specified and directed.
95S&F in replacement switch piano type 5A one way AC 230V complete all as specified and as directed.
96S&F in replacement switch piano type 5A two way AC 230V complete all as specified and as directed .
97S&F in replacement of socket outlet 2 in 1, 5A 3 pin AC 230V complete all as specified and as directed.
98S&F in replacement switch socket outlet 2 in 1, 5A 3 pin AC 230V complete all as specified and as directed.
99S&F in replacement switch Socket outlet 2 in 1, 5 pin 5A and 15A multi purpose socket outlet 3/6 AC 230V complete all as specified and as directed.
100S&F ceiling rose of size 65mm x 50mm 3 terminal AC 230V complete all as specified and as directed.
101S&F lamp holder angle/ batten holder back light type with base plate suittable for 230V complete all as specified and as directed.
102S&F door bell AC 230V ding dong single phase complete all as specified and as directed.
103S&F in repairs for LED Tubelight rod 20 watt 240V complete all as specified and as directed.
104S&F in replacement MCB SP 6 to 32A 10 KA all as specified.
105S&F MCB SPN 40 to 63A 10 KA , 'C' Series 240V all as specified .
106S&F MCB TPN 40 to 100A 10 KA 'C' Series 415V all as specified .
107S&F in repairs of sheet metal enclosures Single pole and neutral with two pin earth plug and socket with plug top including double pole MCB 20A complete all as specified and as directed.
108S&F surface and wall mounted 20 Watt LED tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver inputVage AC 230V, 50 HZ complete all as specified and directed
109S&F in repairs of bulk head luminarie with LED 10 watt lamps Hexagonal shaped with engineering plastic housing and frame with opal PMMA defuser complete including disconnecting and taking out old U/S light fittings all as specified and directed by Engineer in charge.
110S&F energy saving decorative wall mounting LED Lighting fixtures as mirror light made out of poly corbonate suitable for 2 feet 10 Watts LED and making connections complete all as specified and directed by Engineer in charge.
111M&L PVC Rectangular block for mounting switches, sockets, regulators etc.with 3 mm thick plastic laminates sheet cover of size 100mm x 100mm x 50mm deep complete all as specified and directed
112All as per Item No. 111 above but of size 200mm x 150mm x 50mm
113S&F in repairs of Modular switch 1 Way 6A, 1 Module AC 230V complete all as specified and as directed.
114S&F in repairs of Modular switch 1 Way 16A, 1 Module AC 230V complete all as specified and as directed.
115S&F in repairs of Modular socket, 6A - 2/3 pin combined, 2 Module AC 230V complete all as specified and as directed.
116S&F in repairs of Modular socket, 6A/16A - 2/3 pin combined, 2 Module AC 230V complete all as specified and as directed.
117S&F in repairs of Modular white cover plate with frame but 4 module complete all as specified and as directed.
118S&F in repairs of Modular white cover plate with frame but 8 module complete all as specified and as directed.
119S&F in repairs for LED domestic bulb 9 Watt type 240V complete all as specified and as directed.
120Demolition of brick work built in cement mortar or cement lime mortar.
121M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) using old size bricks.
122M&L for Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc.
123M&L for Rendering 15mm thick in CM (1:6) on brick walls or concrete surface,finished even and smooth without using extra cement.
124M&L for Rendering 5mm thick in CM (1:3) on brick or concrete surfaces in ceiling, finished even and smooth without using extra cement.
125M&L for Preparing newly plastered surfaces of walls and two coats of cement paint.
126M&L for Preparing new plastered surfaces of ceiling and two coats of white wash
127M&L for Demolition of lime concrete in ground floors and pavings exceeding 15 cm thickness.
128M&L for Cement concrete type E2 (1:5:10) (40 mm graded aggregate) in filling and mass concrete
129M&L for Applying evenly two coats of blown type bitumen at the rate of 1.50 kg per square metre & bulinding with clean dry sand @ 0.05 Cum per Sqm.
130M&L for Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50kg per sqm.
131M&L for 25mm bore galvanised steel water tubing medium grade in sunken floor spouts etc including cutting through brick wall and making good complete.
132M&L for Rendering 15mm thick in CM (1:4) mixed with water proofing compound on faces of brick work or concrete surfaces finished even and smooth without using extra cement.
133Demolition of cement concrete in ground floors and pavings etc not exceeding 15 cm thick above or below ground level.
134Demolition of reinforced cement concrerte of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer -in-Charge.
135Removal of existing bituminous felt roof treatment of any description, cleaning the surface and removing the debris out of MoD land.
136Providing, cement concrete type B1 (using 20mm graded stone aggregate) in roof kerbs, roof padding, base of tank or mud stops, rounded or chamfered on edges.
137Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with CM (1:3).
138M&L rendering15 mm thick on fair faces of brick work or concrete surfaces in CM (1:3) and finished even and smooth without using extra cement including mixing of W.P.C. (WPC will be measured and paid seperately)
139Supply only liquid water proofing compound.
140M & L for Brushing neat cement slurry with 3.0 Kg of cement per Sq.m
141M&L for Waterproofing on roof and parapets including flashing and junctions of parapet, kerb, wall etc. as under:-(a) Applying bituminous primer on cleaned and dried surface @ 0.20 Kg/Sqm.(b) A coat of hot blown type bitumen of grade 85/25, applied hot at the rate of 1.2 kg/sqm.(c) Laying APP based polymeric water proofing membrane (weighing not less than 3 kg/sqm) reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) by thermo fusion using butane torch with 10 cm longitudinal and 15 cm end overlaps firmly bonded and levelled by heating with butane torch.(d) Painting the exposed APP membrane surface with bituminous aluminium paint @ 0.15 Kg/Sqm.
142Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm but not exceeding 4 Sqm each.
143S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube.
144M&L for 30 mm thick solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rails; panelling of plain colour PVC sheet sealed to the stiles and rails with suitable PVC sheet beading, joined together with solvent cement.
145M&L for Aluminium anodised barrel tower bolt extruded section, 200mm long.
146M&L for Extruded anodised aluminium alloy handles fabricated type 150mm long grip.
147M&L for 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.
148S&F in repair mild steel 300mm ordinary rat tail rod pattern door spring incl roller & plate including welding on mild steel frames complete.
149Dismanting floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises.
150M&L for 25mm thick cement concrete (1:2:4), type B-1 (20mm graded aggregate) in floors.
151M&L glazed ceramic coloured tiles in vertical surfaces, area of each tile exceeding 0.08 sqm but not exc 0.16 sqm, 7mm to 8mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15mm thick rendering in CM (1:4).
152M&L glazed ceramic coloured tiles in vertical surfaces, 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15mm thick rendering in CM (1:4).
153M&L for Non - skid joint free ceramic coloured tiles 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6).
154M&L for Vitrified ceramic light shade coloured tiles 10mm thick, area not exceeding 0.36sqm (square or rectangular) polished, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6).
155M&L for Vitrified ceramic light shade coloured tiles skirting cut out of 10 mm thick, area not exceeding 0.36sqm (square or rectangular) polished, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4).
156Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.
157M&L for Granite 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in CM (1:4).
158Cutting chases in brick walls, pinning in making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth
159Taking up down steel tubing and connections 15mm bore including cleaning for re-fixing or removal from site.
160Taking up down steel tubing and connections 20mm bore including cleaning for re-fixing or removal from site.
161Fixing only 15mm bore galvanised steel water tubing with all fittings complete fixed to wall and ceiling or laid in floors.
162Fixing only 20mm bore galvanised steel water tubing with all fittings complete fixed to wall and ceiling or laid in floors.
163S&F 15mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors.
164S&F 20mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors.
165Disconnecting existing tanks of capacity exceeding 250ltr and not exceeding 500ltr, setting aside (or lowering if required) and hoisting if required, reconnecting and re-fixing in position.
166Disconnecting existing tanks of capacity exceeding 500ltr and not exceeding 1000ltr, setting aside (or lowering if required) and hoisting if required, reconnecting and re-fixing in position.
167Dismantling water tanks exceeding 250 and not exceeding 500 ltr capacity.
168Dismantling water tanks exceeding 500 and not exceeding 1000 ltr capacity.
169S&F rotational moulded polythylene water storage tank 500 ltr capacity, cylindrical vertical with closed top, hoisted and fixed in position all as specified.
170S&F rotational moulded polythylene water storage tank 1000 ltr capacity, cylindrical vertical with closed top, hoisted and fixed in position all as specified.
171S&F in repairs 15mm diameter ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210gms)
172S&F in repairs 20mm diameter ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210gms)
173S&F in repairs 25mm diameter ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210gms)
174S&F in repairs kitchen sinks made of stainless steel 1 mm thick with wastes coupling and washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.
175S&F in repairs kitchen sinks with drainage board made of stainless steel 1 mm thick with wastes coupling and washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.
176S&F in repair 15mm bore chromium plated cast copper alloy sink tap with swan neck type spout with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
177S&F in repair 15mm bore brass CP wall mixer for mixing hot and cold water screwed down for iron pipe.
178S&F in repairs 15mm diameter cast copper alloy chromium plated long body fancy type bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
179S&F in repairs 15mm diameter chromium plated cast copper alloy stop valves, angle type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.
180S&F in repair plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.
181S&F in repairs brass chromium plated shower rose with swivel joints, 125mm diameter, including fixing to steel pipe or union.
182S&F in repairs PVC connection 15mm size 450mm long with 2 Nos PTMT end nuts with washer.
183S&F in repair vitreous China wash basin, white, flat back, size 550mm x 400mm including CI/MS brackets including cutting for and pinning in ends of brackets or erecting stand.
184S&F in repair 32mm waste coupling of PTMT, half or full threaded (minimum weight 45gms)
185S&F in repairs 32mm diameter ribbed PVC waste drain pipe for WHB, urinal etc, strached length 90cm with PVC coupling socket.
186S&F in repairs 40mm diameter ribbed PVC waste drain pipe for sink, strached length 90cm with PVC coupling socket.
187S&F in repair 15mm diameter chromium plated cast copper alloy fancy type pillar taps with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flyuts, screwed for iron pipe.
188S&F in repair 15mm bore brass CP basin mixer for mixing hot and cold water screwed down for iron pipe.
189S&F in repairs 600mm x 450mm x 5mm thick bevelled edge mirror of selected quality glass with aluminium frame of channel alround mounted on 4mm thick commercial ply or AC building board fitted to wooden plug with CP brass screws.
190S&F in repairs vitreous china wash down water closet pan (pedastal pattern) white including fixing bolts, connection to drain (or outgoing pipe) and flushing pipe etc.
191S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580mm x 440mm white, with integral foot rests including provn of lean concrete bedding, connections to flushing pipe and making good disturbed portion of floor to match existing surface.
192S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, brackets, PVC flushing pipe inclduing connecting to WC.
193S&F in repair white vitreous china laboratory sink size 450mm x 300mm x 150mm including beding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to waste pipe.
194S&F in repair white vitreous china laboratory sink size 600mm x 450mm x 200mm including beding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to waste pipe.
195S&F in repair 15mm bore chromium plated cast copper alloy three way laboratory cock (deck mount installation type), screwed down, screwed for iron pipe.
196S&F in repairs 15 mm diameter chromium plated cast copper alloy two way stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.
197PVC lid for PVC water storage tank covers upto 1000 ltrs capacity fixed in repair.
198S&F in repair acrylic body bath cabinet single mirror, size 350mm x 450mm
199S&F in repair stainless steel kitchen storage (plate rack) of overall size 31\\" x 36\\" x 10\\".
200S&F in repairs 20mm diameter brass chromium plated tubular towel rail 600mm long including brackets.
201S&F in repairs powder coated aluminium alloy drapary (curtain) rod 25mm diameter fancy type with fixing brackets, end cap studs complete.
202S&F in repairs internal fitting of requisite pattern and size for 15mm bib tap, pillar tap, stop cock, angle stop cock etc of any description.
203Stainless steel wire cloth 0.36mm nominal diameter of wire and average width of aperture 1.40mm fixed in repairs in wooden or metal frames.
204M&L for 18 mm thick wood plastic composite (WPC) panel fixed in repair with suitable pins, screws and adhessive in cabinets body, shutters and shelves.
205Mild steel bright finish or electrogalvanised continuous (piano) hinge 40mm width of flaps and fixed to cup board shutters.
20640mm diameter mild steel bright finished cupboard knobs fixed with nut, screw and washer
207S & F stainless steel modular cabinet hinges with spring suitable to hold the shutter in open/shut position.
208S & F stainless steel cabinet handles 75mm size decorative type.
209S & F 35mm size magnetic catches fixed in modular type cabinets with MS plate (bright polished) on shutter.
210100 mm size aluminium anodised hasp and stapple safety type including bolt to hinge plate fixed with screws.
211S&F in repair chromium plated health faucet with 1m tube and hanging hook.
212S&F in repairs chromium plated butterfly spray jet for EWC with 1m long flexible tube provided with end nut and washer.
213Dismantling of cast iron drain pipes and fittings upto 100mm bore, jointed in cement mortar and taking out of trenches, if required.
214S&F 75mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls.
215S&F 100mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls.
216Fixing only 75mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls.
217Fixing only 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls.
218S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured)
219S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured)
220S&F 75mm bore cast iron bends (any radius), fitted with oval access doors.
221S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval access doors.
222S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval access doors.
223Cast iron cowls 100mm bore.
224Cast iron nahani trap 75mm diameter of outlet with stainless steel grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1.
225M&L for Post construction Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm diameter holes with CM (1:2) (1 cement: 2 coarse sand) to match the existing floors
226Providing and injecting chemical emulsion for Post constructional anti termite treatment along external wall below concrete apron using chemical emulsion @2.25 Ltrs/linear metre including drilling and plugging holes etc in apron.
227Supply and fix Durastrip SBS Bitumen Self Adhesive Bitumen Flashing Tape of Size 1000cm x 10cm x 1.6mm, Silver thickness on roof sheets complete all as specified and as directed by Engineer-in-Charge.
228Dismantling corrugated or plain steel sheeting any gauge,thickness,including Nainital or similar pattern roof coverings
229S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering for flat or arched roof cladding to wall, fixed with self tapping screws as specified
230Dismantling wrought iron or mild steel work of any discription not otherwise provided for complete all as specified and as directed
231S&F Steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde E- 240) quality A as per IS 808 (Part V) 1976 add to any of the foregoing items if structure steel is painted with one coat of zink chromatic primer paint (Including preparation of surface) at contractors workship before fabrication.
232M&L preparation of new steel surfaces of any descriptions and applying two coats of synthetic enamel paints over a coat of red oxide primer.
233Taking down PVC (SWR) pipes (of any radius) including joints etc. complete all as specified and as directed by the Engineer-in-Charge.
234S&F PVC (SWR) pipes 110mm diameter. single docketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge.
235S&F PVC (SWR) pipes 75mm diameter. single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge.
236M&L for grouting of sunken floor slab with cement slurry by mixing 50 Kg of cement with 18 to 22 litre of water with admixture of FOSROC CEBEX 100 (Plastized expanding grout admixture) about 225 gms per 50 Kg of cement by drilling upto 12mm diameter. hole in floor @ 300mm C/C upto required depth and grouting/ pumping the grout with mechanically powered grout mixer upto 10 Kg for each hole as per manufacturer's instructions and sealing the hole after grouting (GROUT= WATER+ CEMENT+ FOSROC CEBEX 100 in proportion) complete all as specified and as directed by the Engineer-in-Charge.
237M&L for sealing of floor/wall tile joint with NITOTILE GROUT (Cementing Tile Joint Filler) by uniform paste prepared with one part of water to 3 part of powder by volume complete all as per manufacturer's instructions complete all as specified and as directed by the Engineer-in-Charge.
238Repairs to low/ high level flushing cistern syphon, washers, handles, float valves, stopping leakage of Down pipe by applying m-seal and other related works of to make the flushing cistern functional complete all as specified and directed by Engineer-in-Charge. Note: Rates quoted by the contractor are deemed to inclusive of necessary tools and plants incl mtrls viz GI inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32mm diameter etc required to complete the job.
239M&L for repairs to the existing floor trap by demolition of PCC including tiles and screed bed for the floor area of 200mm x 200mm around the floor trap, provision of 110mm diameter. PVC (SWR) pipe vertically for the depth of 20cm to 30cm from the floor level up to the floor trap embedded in PCC (1:2:4) type B1 and making good with the existing floor finish including provision grating complete all as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58405719
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 38.12 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Day To Day Maintenance & Repair To Plumbing, Sanitary Fitting, Leakage, Seepage, Sunken Portion, Floor/Wall Tiling And Miscellaneous Work At Drde Gwalior Under Ge (I) R&D Delhi.
Basic Detail
Tender No GE/RND/T-47/DLI/2026-2027
Bidding Type Tender
Location
City Gwalior
State Madhya Pradesh
Key Dates
Publish Date 05 Nov 2026
Submission Date 26 Nov 2026
Open Date 03 Dec 2026
Finance
Tender Value 38.12 Lakhs
Tender Fee 500
EMD 76240
Exemption Available
Document List
75f8b6e4-97a4-4d83-855c-a4f9de0c9315.html
BOQ_894223.xls
TDR.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

75f8b6e4-97a4-4d83-855c-a4f9de0c9315.html

xls

BOQ_894223.xls

pdf

TDR.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender