Tender For Provision For Deficient Lift For Atc Building No P-4 Including 03 Years Comprehensive Maintenance At installation Garuda Naval Base Kochi
Tender Value
97.10 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
11 days left
EMD
1.70 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision For Deficient Lift For Atc Building No P-4 Including 03 Years Comprehensive Maintenance At installation Garuda Naval Base Kochi
BOQ
| Sl. No. | Item Description |
| 1 | LIFT AND CIVIL WORK:Design, supply, installation, testing and commissioning of electrically operated Machine room less (MRL) Passengers lift of capacity 408 kg (06 Passenger) with a speed of 1.25 mtr/ sec to serve ground floor and 04 upper floors (G+4), with microprocessor based operation and with simplex collective, selective, control with or without lift attendant and with variable voltage, variable frequency system with two speed automatic control drive, with elevator sliding car door and landing door made of stainless steel, car cage made out of not less than 1.2 mm thick stainless steel (SS 316), vandal proof (Scratch free, Hairline finish) as well as cage roof covered with stainless steel sheets of suitable size cage floor made of granite floor minimum 10mm thick of approved colour, automatic car levelling micro stroke push button operation and floor indicators in car in all landings, fire man switch, emergency lamp, alarm push button etc with and including automatic rescue device (ARD) battery operated with and including maintenance free battery of suitable capacity and battery charger with optimum direction section in start operation requiring no human intervention, 3D infra red sensor in full length of doors and built in floor announcing system with 03Nos handset one each in car, Top floor near control panel and ground floor and over load indicator with suitable for three phase, 415 volts, 50 Hz AC supply for passenger lift and LT panel incl all accessories such as MCCB/Isolator/MCB and connected items with the recommendation of OEM and EIC including construction of lift building in permanent specification as per E-in-C specifications (excluding pile foundation and pile cap) & including connecting passage with steel structure & SS hand rail, poly carbonate sheet wall & roof (including foundation) and consultancy for structural design & estimate as per architectural drawing all as specified and directed. |
| 2 | Description for lift:-(a) Quantity : 01 (One) unit(b) Assembled Product : Passenger Elevator(c) Capacity : 408 Kg(d) Speed : 1.00 m/s(e) Stops & Openings : 5 Stops, 5 Openings(f) Floor designations : G,1,2,3,4(g) Machine type & location : Gearless machine located in the overhead of lift well(h) Control : Simplex collective selective control(j) Drive : ACVVVF(k) Power Supply : 3 Phase, 415V, 50 HZ(l) Hoist Way Dimensions : 1800mm wide x 1600mm deep(m) Car Travel : As per site requirement(n) Overhead : 4200mm(o) Pit depth : 1600mm(p) Car Dimensions : 1000mm wide x 1100 mm deep x 2200 mm high(q) Door Opening :2100 mm high centre opening/stainless steel Hairline finish (SS 316)(r) Car Design : Stainless steel Hairline finish (SS 316)(s) Car Flooring : Granite flooring 10mm(t) Handrail : Round handrail in stainless steel finish provided on rear wall of car(u) Landing operating panel : Individual landing operating panel for each floor in each elevator(v) Displays : LCD Displays in cabin operating panel and in all landings(w) Special Features : Automatic Rescue Devices with visual and audio indicator/3 way intercom/provision for camera cable(x) Special Features : laminated mirror of entire width of rear panel of half height Please Enable Macros to View BoQ information |
| 3 | Description for lift:-(a) Quantity : 01 (One) unit(b) Assembled Product : Passenger Elevator(c) Capacity : 408 Kg(d) Speed : 1.00 m/s(e) Stops & Openings : 5 Stops, 5 Openings(f) Floor designations : G,1,2,3,4(g) Machine type & location : Gearless machine located in the overhead of lift well(h) Control : Simplex collective selective control(j) Drive : ACVVVF(k) Power Supply : 3 Phase, 415V, 50 HZ(l) Hoist Way Dimensions : 1800mm wide x 1600mm deep(m) Car Travel : As per site requirement(n) Overhead : 4200mm(o) Pit depth : 1600mm(p) Car Dimensions : 1000mm wide x 1100 mm deep x 2200 mm high(q) Door Opening :2100 mm high centre opening/stainless steel Hairline finish (SS 316)(r) Car Design : Stainless steel Hairline finish (SS 316)(s) Car Flooring : Granite flooring 10mm(t) Handrail : Round handrail in stainless steel finish provided on rear wall of car(u) Landing operating panel : Individual landing operating panel for each floor in each elevator(v) Displays : LCD Displays in cabin operating panel and in all landings(w) Special Features : Automatic Rescue Devices with visual and audio indicator/3 way intercom/provision for camera cable(x) Special Features : laminated mirror of entire width of rear panel of half height Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender