Tender For Repair To Certain Trade Pattern, Hdf Items And Other Misc Repair Work Under Ge Dehradun..
Tender Value
35 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
17 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Certain Trade Pattern, Hdf Items And Other Misc Repair Work Under Ge Dehradun..
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | TABLE OFFICE/ OFFICER STEEL FD-84,1003 |
| 3 | M&L TOP of TABLE OFFICE OFFICER STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (Make: Greenply/Century ply/Archid ply), providing Teak Wood Beading 5.0 mm thick all round, applying French polish up to the desired finish on beading, as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Top, complete all as specified and as directed. |
| 4 | M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, enamel paint (as approved) & taking out unserviceable Drawer, complete all as specified and as directed. |
| 5 | M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, & taking out unserviceable Central Stiffener, complete all as specified and as directed. |
| 6 | M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, &including taking out unserviceable Side Stiffener, complete all as specified and as directed. |
| 7 | M&L LOCK (Make: Godrej/Harrison/Link pattern) of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Lock, complete all as specified and as directed. |
| 8 | M&L Mild Steel HANDLE of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Handle, complete all as specified and as directed. |
| 9 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, & complete all as specified and as directed. |
| 10 | S&F New HARD RUBBER SHOES of appropriate size and superior quality (as approved) fixing to Leg of TABLE OFFICE CLK STEEL as shown on Drawing No. FD-84 &1003 including taking out unserviceable SHOES, complete all as specified and as directed. |
| 11 | M&L removing/scrapping old worn-out Paint from TABLE OFFICE OFFICER STEEL (Drawing No. FD-84 & FD-1003) by Grinder and Sand Paper/Scrapper and applying Two Coats of OG Synthetic Enamel Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 12 | TABLE OFFICE CLK STEEL FD-84, 381 & 1004 |
| 13 | M&L TOP of TABLE OFFICE CLERK STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE: GREENPLY/CENTURY PLY/ARCHID PLY), providing Teak Wood Beading 5.0 mm thick all round, applying French polish up to the desired finish on beading as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Top, complete all as specified and as directed. |
| 14 | M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, & including taking out unserviceable Drawer, complete all as specified and as directed. |
| 15 | M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, &taking out unserviceable Central Stiffener, complete all as specified and as directed. |
| 16 | M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, & complete all as specified and as directed. |
| 17 | M&L LOCK (Make: Godrej/Harrison/Link pattern) of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Lock, complete all as specified and as directed. |
| 18 | M&L Mild Steel HANDLE of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Handle, complete all as specified and as directed. |
| 19 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, &complete all as specified and as directed. |
| 20 | S&F New HARD RUBBER SHOES of appropriate size and superior quality (as approved) fixing to Leg of TABLE OFFICE CLK STEEL as shown on Drawing No. FD-84, 381 & 1004 including taking out unserviceable SHOES, complete all as specified and as directed. |
| 21 | M&L removing/scrapping old worn-out Paint from TABLE OFFICE CLERK STEEL (Drawing No. FD-84, FD-381 & FD-1004) by Sand Paper/Scrapper and applying Two Coats of OG Synthetic Enamel Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 22 | TABLE 3'X2' WITHOUT DRAWER FD-1007 |
| 23 | M&L TOP of TABLE 3'X2' WITH OUT DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE: GREENPLY/CENTURY PLY/ARCHID PLY), providing Teak Wood Beading 5.0 mm thick all round, applying French polish up to the desired finish on beading, as shown on Drawing No. FD-1007 including taking out unserviceable Top, complete all as specified and as directed. |
| 24 | M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, & complete all as specified and as directed. |
| 25 | M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, & complete all as specified and as directed. |
| 26 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, & Rest complete all as specified and as directed. |
| 27 | S&F New HARD RUBBER SHOES of appropriate size and superior quality (as approved) fixing to Leg of TABLE 3 ×2' WITHOUT DRAWER as shown on Drawing No. FD-1007 including taking out unserviceable SHOES, complete all as specified and as directed. |
| 28 | M&L removing/scrapping old worn-out Paint from TABLE 3'X2' WITH OUT DRAWER (Drawing No. FD-1007) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamel Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 29 | TABLE BED SIDE FD/E6/MAP |
| 30 | M&L TOP of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE: GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying French polish up to the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed. |
| 31 | M&L Side/Back of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE: GREENPLY/CENTURY PLY/ARCHID PLY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying French polish up to the desired finish on beading, as shown on Drawing including taking out unserviceable side/back, complete all as specified and as directed. |
| 32 | M&L UPPER DRAWER of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE: GREENPLY/CENTURY PLY/ARCHID PLY/ARCHIED) as shown on Drawing including taking out unserviceable Upper drawer, complete all as specified and as directed. |
| 33 | M&L LOWER DRAWER of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE: GREENPLY/CENTURY PLY/ARCHID PLY/ARCHIED) as shown on Drawing including taking out unserviceable lower drawer, complete all as specified and as directed. |
| 34 | M&L LEG of TABLE BED SIDE of MS square pipe 25x25 mm x 1.6 mm as shown on Drawing including taking out unserviceable leg, complete all as specified and as directed. |
| 35 | S&F New HARD RUBBER SHOES of appropriate size and superior quality (as approved) fixing to Leg of TABLE BED SIDE as shown on Drawing No. FD/E6/MAP including taking out unserviceable SHOES, complete all as specified and as directed. |
| 36 | TABLE 3'X2' WITH DRAWER FD-1008 |
| 37 | M&L TOP of TABLE 3'X2' WITH DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE: GREENPLY/CENTURY PLY/ARCHID PLY), providing Teak Wood Beading 5.0 mm thick all round, applying French polish up to the desired finish on beading as shown on Drawing No. FD-1008 including taking out unserviceable Top, complete all as specified and as directed. |
| 38 | M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, & taking out unserviceable Drawer, complete all as specified and as directed. |
| 39 | M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, & complete all as specified and as directed. |
| 40 | M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, & complete all as specified and as directed. |
| 41 | M&L LOCK (Make: Godrej/Harrison/Link pattern) of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Lock, complete all as specified and as directed. |
| 42 | M&L Mild Steel HANDLE of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Handle, complete all as specified and as directed. |
| 43 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, &complete all as specified and as directed. |
| 44 | S&F New HARD RUBBER SHOES of appropriate size and superior quality (as approved) fixing to Leg of TABLE 3 ×2' WITH DRAWER as shown on Drawing No. FD-1008 including taking out unserviceable SHOES, complete all as specified and as directed. |
| 45 | M&L removing/scrapping old worn-out Paint from TABLE 3'X2' WITH DRAWER (Drawing No. FD-1008) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic enamel Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 46 | TABLE COMPUTER FD/E6/MAP |
| 47 | M&L TOP of TABLE COMPUTER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (Make: Greenply/Century ply/Archid ply), providing Teak Wood Beading 5.0 mm thick all round, applying French polish up to the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed. |
| 48 | M&L DRAWER made out of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE: GREENPLY/CENTURY PLY/ARCHID PLY/ ARCHID) and fixing to TABLE COMPUTER as shown on Drawing, including taking out unserviceable Drawer, complete all as specified and as directed. |
| 49 | M&L LOCK (Make: Godrej/Harrison/Link pattern) of TABLE COMPUTER and fixing as shown on Drawing including taking out unserviceable Lock, complete all as specified and as directed. |
| 50 | M&L Mild Steel HANDLE of TABLE COMPUTER and fixing as shown on Drawing including taking out unserviceable Handle, complete all as specified and as directed. |
| 51 | S&F HARD RUBBER SHOE of appropriate size and superior quality fixing to Leg of TABLE COMPUTER as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed. |
| 52 | CHAIR COMPUTER AND CHAIR REVOLVING VARIOUS TYPES TP |
| 53 | M&L TAPESTRY/FABRIC CLOTH over SYNTHETIC FOAM 50 - 75 mm thick (as approved) for SEAT/BACK of CHAIR COMPUTER/ CHAIR REVOLVING including taking out old worn-out Tapestry/Fabric Cloth and Foam from Chairs, complete all as specified and as directed. (Tapestry Cloth should not less than Rs 500/mtr) |
| 54 | M&L CASTOR WHEEL (as approved) of CHAIR COMPUTER/CHAIR REVOLVING including taking out unserviceable or broken Castor Wheel from Chairs, complete all as specified and as directed. |
| 55 | M&L BOTTOM BASE made out of MS steel (as approved) of CHAIR COMPUTER/CHAIR VISITOR/CHAIR REVOLVING including taking out unserviceable Bottom Base from Chairs, complete all as specified and as directed. |
| 56 | M&L GAS LIFTING HYDROLIC SYSTEM of CHAIR COMPUTER/CHAIR VISITOR/CHAIR REVOLVING including taking out unserviceable Gas Lifting Hydraulic System from Chairs, complete all as specified and as directed. |
| 57 | M&L HANDLE of CHAIR COMPUTER/ CHAIR VISITOR/CHAIR REVOLVING including taking out unserviceable Handle from Chairs, complete all as specified and as directed. |
| 58 | S&F HARD RUBBER/PVC SHOES superior quality (as approved) fixing to Leg of CHAIR COMPUTER & CHAIR REVOLVING as shown on Drawing including taking out unserviceable SHOES, complete all as specified and as directed. |
| 59 | CHAIR SCHOOL WITH HAND BOARD FD-140/ FD-48/ FD/E6/MAP/05 |
| 60 | M&L Moulded PVC/wooden seat and back of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48 including taking out unserviceable seat back, complete all as specified and as directed. |
| 61 | M&L Hand board made out of WPC Board of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48 including taking out unserviceable seat back, complete all as specified and as directed. |
| 62 | M&L for Welding of Broken Leg with Mild Steel Round Pipe of size 20mm x 1.6 mm thick (as required) for CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48, & rest complete all as specified and as directed. |
| 63 | M&L removing/scrapping old worn-out Paint from CHAIR SCHOOL WITH HAND BOARD (Drawing No. FD/E6/MAP/05/ FD-140/ FD-48) by Sand Paper/ Scrapper and applying Two Coats of Black synthetic Enamel Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 64 | M&L welding (full round on pipe as a one spot) of broken part of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/, FD-140, FD-48 rubbing welded portion to obtain a smooth surface, necessary preparation of surfaces, applying two coats of Black Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed. |
| 65 | CHAIR CB STEEL WITH ARMS FD-75(M) |
| 66 | Removing of old broken Seat and S&F new seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with leatherette Rexin cover 2mm thick &screwed to track rail as directed by Engr-in-Charge. |
| 67 | Removing of old broken Back and S&F new seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with leatherette Rexin cover 2mm thick &screwed to track rail as directed by Engr-in-Charge. |
| 68 | M&L ARMS REST made out of Modular plastic Arms for CHAIR CBA STEEL WITH ARMS, fixed with suitable size Screws and Painting with Black Colour Synthetic Enamel Paint (as approved) on Back Frame as shown on Drawing No. FD-75(M) including taking out unserviceable Arms Rest, complete all as specified and as directed. |
| 69 | M&L Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx.), making hole for fixing End and Other End welded to CHAIR CBA STEEL WITH ARMS size 35x25x3 mm, FD-75(M) including taking out unserviceable Runner & complete all as specified and as directed. |
| 70 | S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed. |
| 71 | S&F HARD RUBBER SHOES superior quality (as approved) fixing to Leg of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable SHOES, complete all as specified and as directed. |
| 72 | M&L removing/scrapping old worn-out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/Scrapper and applying Two coat (OG) of Synthetic Enamel Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 73 | CHAIR VERANDAH FD-256, FD-19 & FD-259 |
| 74 | M&L welding (full welding rod as a one spot) of broken part of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259, rubbing welded portion to obtain a smooth surface & taking out unserviceable part, complete all as specified and as directed. |
| 75 | M&L Mild Steel Round Bar 12mm Dia to cover the distance between RT & LT Leg alongwith the Seat Front Side or Rear Side of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 and welded, & taking out unserviceable Bar, complete all as specified and as directed. |
| 76 | S&F HARD RUBBER SHOE of appropriate size and superior quality (as approved) fixing to Leg of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out unserviceable Shoe, complete all as specified and as directed. |
| 77 | M&L Re-canning of CHAIR VERANDAH in Godrej pattern with 4.0mm wide Half Round Oval Shape Plastic Cane (as approved) to Frame as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out old/worn-out Canning, complete all as specified and as directed. |
| 78 | M&L removing/scrapping old worn-out Paint from Steel Frame of CHAIR VERANDAH (Drawing No. FD-19, FD-256 & FD-259) by Grinder and Sand Paper/Scrapper and applying two coats of White Synthetic Enamel Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 79 | CHAIR CB STEEL WITHOUT ARMS FD-75(M) |
| 80 | Removing of old broken Seat and S&F new seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with leatherette Rexin cover 2mm thick &screwed to track rail as directed by Engr-in-Charge. |
| 81 | Removing of old broken Back and S&F new seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with best quality tapestry Cloth &screwed to track rail as directed by Engr-in-Charge. (Note- Not Less than Rs 500/mtr). |
| 82 | M&L Mild Steel Flat Iron 25x5.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL W/O ARMS size 30x5 mm, applying two coats of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed. |
| 83 | S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed. |
| 84 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed. |
| 85 | Provn of 02 Nos of 25mm Dia round stiffener welded from seat to bottom of chair CB steel w/o handrest to support the seat, as per approved by Engr-in-charge. |
| 86 | M&L removing/scrapping old worn-out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Grinder and Sand Paper/Scrapper and applying One Coat of Synthetic Enamel Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 87 | ALMIRAH LARGE STEEL FD-1031, FD-67 |
| 88 | Removing old broken hinges and fixing new hinges of existing shape and size through gas welding complete all as specified and directed. |
| 89 | Removing of U/S lock and S&F New lock (Make: Godrej/Harrison/Link pattern) of 7 lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed. |
| 90 | Removing of unsv/Broken handles and S&F new Chromium Plated handle of existing shape and size complete all as specified and directed. |
| 91 | Removing of U/S & rusted legs and S&F new legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed. |
| 92 | Removing of U/S & rusted shutters and S&F new shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed. |
| 93 | Removing of U/S & rusted shelves and S&F new shelves made out of MS sheet 1.00 mm thick of existing shape and size complete all as specified and directed. |
| 94 | Providing MS clamps of suitable pattern to the shelves to hold shelves of existing shape and size complete all as specified and directed. |
| 95 | Removing existing u/s 03Way locking device and S&F new 03way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel of existing shape and size complete all as specified and directed. |
| 96 | M&L preparation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD-67 & FD-1031) by Grinder and Sand Paper/Scrapper and applying 02 Coat of hammertone Silver metallic (externally) and Smoke Grey (internally) (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 97 | ALMIRAH STEEL MED AND SMALL FD-243 & 1032 |
| 98 | Removing old broken hinges and fixing new hinges of existing shape and size through gas welding complete all as specified and directed. |
| 99 | Removing of U/S lock and S&F New lock (Make: Godrej/Harrison/Link pattern) of 7 lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed. |
| 100 | Removing of unsv/Broken handles and S&F new Chromium Plated handle of existing shape and size complete all as specified and directed. |
| 101 | Removing of U/S & rusted legs and S&F new legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed. |
| 102 | Removing of U/S & rusted shutters and S&F new shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed. |
| 103 | Removing of U/S & rusted shelves and S&F new shelves made out of MS sheet 1.00 mm thick of existing shape and size complete all as specified and directed. |
| 104 | Providing MS clamps of suitable pattern to the shelves to hold shelves of existing shape and size complete all as specified and directed. |
| 105 | Removing existing u/s 03Way locking device and S&F new 03way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel of existing shape and size complete all as specified and directed. |
| 106 | M&L preparation of old surfaces of ALMIRAH MED &SMALL STEEL (Drawing No. FD-243 & FD-1032) by Grinder and Sand Paper/Scrapper and applying 02 Coat of Hammertone Silver metallic (externally) and Smoke Grey paint (internally) (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 107 | TABLE DINING OR'S FD-165(M) |
| 108 | M&L TOP of TABLE DINING OR'S of ISI marked blockboard 18/19 mm thick with 22-gauge aluminium sheet (Make: Greenply/Century ply/Archid ply), shown on Drawing No. FD-165(M) including taking out unserviceable Top, complete all as specified and as directed. |
| 109 | M&L Mild Steel Square Pipe of size 20mm, 1.6mm thick as LEG having length from 300mm to 500mm and fixing/ welded to TABLE DINING OR'S as shown on Drawing No. FD-165(M), & including taking out unserviceable Leg, complete all as specified and as directed. |
| 110 | M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as LONG RAIL and fixing/welded to TABLE DINING OR'S as shown on Drawing No. FD-165(M), & complete all as specified and as directed. |
| 111 | M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SHORT RAIL and fixing/welded to TABLE DINING OR'S as shown on Drawing No. FD-165(M), & including taking out unserviceable Short Rail, complete all as specified and as directed. |
| 112 | M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SIDE STIFFENER and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), complete all as specified and as directed. |
| 113 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE COMPUTER as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed. |
| 114 | M&L Complete removing/scrapping old worn-out Paint from TABLE DINING OR'S (Drawing No. FD-165(M) by Grinder and Sand Paper/Scrapper and applying Two Coats of Black Synthetic Enamel Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. |
| 115 | LOCKER SKD-562 |
| 116 | Removing old broken hinges and fixing new hinges through gas welding of existing shape and size complete all as specified and directed |
| 117 | Removing of U/S lock and S&F New lock (Make: Godrej/Harrison/Link pattern) of 7 lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed |
| 118 | Removing of unsv/Broken handles and S&F new Chromium Plated handle of existing shape and size complete all as specified and directed |
| 119 | Removing of U/S & rusted legs and S&F new legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed |
| 120 | Removing of U/S & rusted shutters and S&F new shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed |
| 121 | Removing of U/S & rusted shelves and S&F new shelves of required size & shape, made out of MS sheet 1mm thick of existing shape and size complete all as specified and directed |
| 122 | M&L Removing of old worn-out paint from complete locker SKD-562 by Grinder and Sand Paper/Scrapper and applying two coats of hammer tone paint over a coat of primer by Spray painting machine as directed by Engr-in-charge. |
| 123 | TABLE DRESSING GENTS FD-230, FD-31, FD-379 |
| 124 | Removing of old, worn-out U/S mirror and M & L for fixing new mirror 5 mm thick mirror ( Make : SAINT GOBIN,MODI GUARD,ATUL) as per size shown on drg & directed. |
| 125 | Removing UNSV back ply from the mirror and S & F new back ply made out of 6 mm thick BWR grade ply wood. Rest all as specified in the drg and as directed by Engr in Charge. |
| 126 | Removing old UNSV Top from the table dressing gents and S&F new top made out of 18 mm thick exterior grade pre laminated MDF Board. Rest all as specified in the drg and as directed by Engr in Charge. |
| 127 | Removing old UNSV bottom from the table dressing gents and S&F new Bottom made out of 18 mm thick exterior grade pre laminated MDF Board. Rest all as specified in the drg and as directed by Engr in Charge. |
| 128 | M&L for removing old worn-out drawer from the table and S&F new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge . |
| 129 | M&L for removing old unsv knob from the table and S & F new CP knob 40mm to suit to the drawer. Rest all as specified in the drg and as directed by Engr in Charge. |
| 130 | Polishing - Anti-termite and anti-bug treatment shall be done before polishing the wooden items. Scrapping/Grinding will be carried out for renewal of existing dust, dirt, faded polish etc strictly as directed by Engr-in-Charge, M&L for melamine polish high gloss/mate finish with spray machine applying shellac, wood filler, shelar etc after removing of existing polish making surface smooth by sanding and grinding with standard workmanship as directed by Engr-in-charge to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or similar items incl applying wax for depressed surfaces as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engr-in-charge. Shade of polishing/painting will be directed by GE/Engr-in-charge. |
| 131 | SIDE BOARD FD-241, FD-371, FD/MAP/09 |
| 132 | Taking down old u/s Top and M&L for New Top made out of 18/19mm pre laminated exterior grade MDF Board. complete all as specified in drg and as directed by Engr-in-Charge. |
| 133 | Taking down old u/s Leg and M&L for New leg made out of teak wood all as specified in drg and as directed by Engr-in-Charge. |
| 134 | Taking down old u/s Long Rail and M&L for New Long Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge.. |
| 135 | Taking down old u/s Short Rail and M&L for New Short Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge. |
| 136 | M&L for removing old worn-out shutter and supply and fixing new shutter made out of 18/19 mm Prelaminated exterior grade MDF board duly edging 5 mm thick teak wood beading after removing old UNSV edging . Rest all as per drg . |
| 137 | M&L for removing old worn-out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge . |
| 138 | Taking down old u/s Side LT/RT and M&L for New Side LT/RT made out of 18/19mm pre laminated exterior grade MDF Board complete all as specified in drg and as directed by Engr-in-Charge. |
| 139 | M&L for removing old worn-out Back from the Side Board and new Back made out of 6mm Plywood commercial BWR grade. Rest all as specified in the drg and as directed by Engr in Charge. |
| 140 | M&L for taking out old worn-out knob from the drawer of the table and SF new CP knob of best quality approved by GE/Engr-in-Charge. Rest all as specified or as directed by Engr in Charge. |
| 141 | Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge |
| 142 | Polishing - Anti-termite and anti-bug treatment shall be done before polishing the wooden items. Scrapping/Grinding will be carried out for renewal of existing dust, dirt, faded polish etc strictly as directed by Engr-in-Charge, M&L for melamine polish high gloss/mate finish with spray machine applying shellac, wood filler, shelar etc after removing of existing polish making surface smooth by sanding and grinding with standard workmanship as directed by Engr-in-charge to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or similar items incl applying wax for depressed surfaces as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engr-in-charge. Shade of polishing/painting will be directed by GE/Engr-in-charge. |
| 143 | TABLE BED SIDE FD-213 |
| 144 | Removing UNSV top/shelf and S&F new top/shelf made out of 18 mm thick WPC Board (ISI Marked) Rest all as specified in the drg and as directed by Engr in Charge. |
| 145 | Removing UNSV side and S&F new side made out of 18 mm thick WPC Board (ISI marked) . Rest all as specified in the drg and as directed by Engr in Charge. |
| 146 | Removing UNSV back and S&F new back made out of 18 mm thick WPC Board (ISI Marked).Rest all as specified in the drg and as directed by Engr in Charge. |
| 147 | Polishing - Anti-termite and anti-bug treatment shall be done before polishing the wooden items. Scrapping/Grinding will be carried out for renewal of existing dust, dirt, faded polish etc strictly as directed by Engr-in-Charge, M&L for melamine polish high gloss/mate finish with spray machine applying shellac, wood filler, shelar etc after removing of existing polish making surface smooth by sanding and grinding with standard workmanship as directed by Engr-in-charge to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or similar items incl applying wax for depressed surfaces as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engr-in-charge. Shade of polishing/painting will be directed by GE/Engr-in-charge. |
| 148 | TABLE OFFICER FD-84(M) |
| 149 | Removing UNSV top and S&F new top made out of 18 mm thick pre laminated exterior grade MDF Board. Rest all as specified in the drg and as directed by Engr in Charge. |
| 150 | Removing UNSV leg and S&F new leg made out of teak wood as per existing shape and size. Rest all as specified in the drg and as directed by Engr in Charge. |
| 151 | M&L for removing old worn-out drawer from the table and S&F new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge . |
| 152 | M&L for removing old worn-out shutter the table and S&F new shutter made out of 18 mm thick prelaminated exterior grade MDF board specified in the drg and as directed by Engr in Charge . |
| 153 | S&F new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing table officer complete all as shown on drawing and as directed by Engr-in-Charge. |
| 154 | Bottom Stiffener Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing table all as specified in drg and as directed by Engr-in-Charge. |
| 155 | M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge |
| 156 | Polishing - Anti-termite and anti-bug treatment shall be done before polishing the wooden items. Scrapping/Grinding will be carried out for renewal of existing dust, dirt, faded polish etc strictly as directed by Engr-in-Charge, M&L for melamine polish high gloss/mate finish with spray machine applying shellac, wood filler, shelar etc after removing of existing polish making surface smooth by sanding and grinding with standard workmanship as directed by Engr-in-charge to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or similar items incl applying wax for depressed surfaces as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engr-in-charge. Shade of polishing/painting will be directed by GE/Engr-in-charge. |
| 157 | RE-CANNING OF VARIOUS TYPES OF FURNITURE |
| 158 | M&L for removing of old/broken/ unserviceable plastic cane & re-canning of chair dining, chair CB without arms/chair writing, chair CB with arms, chair CB office, chair easy FD/NF, chair, stool dressing CB, Couch set & bin soiled linen with 2 to 2.5mm semi round cane plastic of white colour and border with 3 to 4mm semi round cane plastic of white colour. Rest all as per drawings. The canning work shall be done in Godrej pattern. Cane should be in White colour (Non recycled) & make as approved. |
| 159 | SOFA SET 4 SEATER FD-281 & MAP-II/02 |
| 160 | Taking down old U/S front/ rear leg of sofa set 4 seater and S& F new front/ Rear leg of first class teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge |
| 161 | Taking down old U/S Side back/Front Rail of sofa set 4 seater and S& F new Side back/Front Rail of first class teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front. |
| 162 | Taking down old U/S battens for seat/back of sofa set 4 seater and S& F new battens for seat/back of first class teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge |
| 163 | Taking down old U/S front/ Arms of sofa set 4 seater and S& F new Arms of first class teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge |
| 164 | Removing of existing U/S cushion from seat of sofa set 4 seater and S & F new foam cushion 100 mm thick 40 density Make: Kurlon/sleepwell duly stitched with fine standard thread and providing best quality Zip with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 550/RM) |
| 165 | Removing of existing U/S cushion from back of sofa set 4 seater and S & F new foam cushion 100 mm thick 40 density Make: Kurlon/sleepwell duly stitched with fine standard thread and providing best quality Zip with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 550/RM) |
| 166 | M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality and appropriate size with steel screw to the legs of the item all as specified and directed by Engr-in-Charge |
| 167 | Cover Only for Sofa Set 4 Seater: Opening and taking out old unserviceable Cushion Cover size 21\\"x22\\"x4\\" and S&F New Cushion Cover made out of approved Tapestry cloth of best quality duly stitched with fine standard thread and providing best quality Zip with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note: Rate of Tapestry cloth should not be less than Rs 550/Sqmt) |
| 168 | Polishing - Anti-termite and anti-bug treatment shall be done before polishing the wooden items. Scrapping/Grinding will be carried out for renewal of existing dust, dirt, faded polish etc strictly as directed by Engr-in-Charge, M&L for melamine polish high gloss/mate finish with spray machine applying shellac, wood filler, shelar etc after removing of existing polish making surface smooth by sanding and grinding with standard workmanship as directed by Engr-in-charge to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or similar items incl applying wax for depressed surfaces as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engr-in-charge. Shade of polishing/painting will be directed by GE/Engr-in-charge. |
| 169 | SOFA SET 5 SEATER FD-281 & MAP-II/02 |
| 170 | Taking down old U/S front/ rear leg of sofa set 5 seater and S& F new front/ Rear leg of first class teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge |
| 171 | Taking down old U/S Side back/Front Rail of sofa set 5 seater and S& F new Side back/Front Rail of first class teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front. |
| 172 | Taking down old U/S battens for seat/back of sofa set 5 seater and S& F new battens for seat/back of first class teak as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge |
| 173 | Taking down old U/S front/ Arms of sofa set 5 seater and S& F new Arms of first class teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge |
| 174 | Removing of existing U/S cushion from seat of sofa set 5 seater and S & F new foam cushion 100 mm thick 40 density Make : Kurlon/sleepwell duly stitched with fine standard thread and providing best quality Zip with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note: Rate of Tapestry cloth should not be less than Rs 550/RM) |
| 175 | Removing of existing U/S cushion from back of sofa set 5 seater and S & F new foam cushion 100 mm thick 40 density Make : Kurlon/sleepwell duly stitched with fine standard thread and providing best quality Zip with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note: Rate of Tapestry cloth should not be less than Rs 550/RM) |
| 176 | M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality and appropriate size with steel screw to the legs of the item all as specified and directed by Engr-in-Charge |
| 177 | Cover Only for Sofa Set 5 Seater :- Opening and taking out old unserviceable Cushion Cover size 21\\"x22\\"x4\\" and S&F New Cushion Cover made out of approved Tapestry cloth of best quality duly stitched with fine standard thread and providing best quality Zip with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs 550/Sq mtr.) |
| 178 | Polishing - Anti-termite and anti-bug treatment shall be done before polishing the wooden items. Scrapping/Grinding will be carried out for renewal of existing dust, dirt, faded polish etc strictly as directed by Engr-in-Charge, M&L for melamine polish high gloss/mate finish with spray machine applying shellac, wood filler, shelar etc after removing of existing polish making surface smooth by sanding and grinding with standard workmanship as directed by Engr-in-charge to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or similar items incl applying wax for depressed surfaces as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engr-in-charge. Shade of polishing/painting will be directed by GE/Engr-in-charge. |
| 179 | REPAIR/REFIXING PLY TOP CHARPOY GI PIPE |
| 180 | Removing of old unserviceable plywood and S&F new 12mm thick plywood of size 1980x900 mm BWR type (7 Nos of ply) ISI marked confirming to IS-303 (including tightening of whole charpoy frame before fixing of ply wood) fixed with12 Nos round headed bolts with nut & washer of size 5x75mm in the holes drilled at equal distance on rails (03 Nos on each long rail, 02 Nos on each short rail & 01 No on the centre of each FI strip). The edge of plywood shall be smoothened all-round & corner shall be rounded to a radius of 1cm iron carriage complete all as directed by the Engr-in-Charge & as shown on drawings. Make:- Archid ply/Century Ply/Green Ply |
| 181 | Removing of old/unserviceable long rail from charpoy GI Pipe and S&F of new long rail made out of GI Pipe 32mm Dia medium grade duly threaded at both ends up to 45mm & all as directed by the Engr-in-Charge (Note: Unserviceable long rails shall be converted into 01short rail & 02 leg measured under Sch item short rail & Leg. Make: - Jindal/Tata |
| 182 | Removing of old/unserviceable short rails from charpoy GI Pipe and fixing only short rail made out of long rail retrieved from schedule No. 23.02 duly threaded at both end up to 45mm & all as directed by the Engr-in-Charge. Note: Unserviceable short rails shall be converted into 01 leg and measured in Legs. |
| 183 | Removing of old/unserviceable leg from charpoy GI Pipe and fixing only leg made out from old long rails/short rails, retrieved under item Long Rail & Short Rail here in before duly threaded at one end up to 45mm and all as directed by the Engr-in-Charge. |
| 184 | Removing of Old/unserviceable broken existing elbow of charpoy GI pipe and S&F new elbow GI 03-way 32mm medium grade ISI marked complete all as specified & directed |
| 185 | Removing of Old/unserviceable broken existing check nut of charpoy GI pipe and S&F new elbow check nut 32mm medium grade ISI marked complete all as specified & directed |
| 186 | Replacement of existing u/s flat iron MS strip of size 900mm×32mm×3mm and fixing 03 Nos of new MS strip of size 900mm x 40mm x 5mm at equal distance of long rails of Charpoy GI Pipe, duly painted with 01 coat of red oxide & 02 coats of black synthetic enamel paint as directed by the Engr-in-Charge/GE. (03 Nos in each Charpoy) |
| 187 | Note : Tenderers may note that amount of credit Rs 178666.00 will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender