Tender For Comprehensive Maintenance Works Of Otm Buildings In Domestic Area At Af Station Suratgarh
Tender Value
40 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
17 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Works Of Otm Buildings In Domestic Area At Af Station Suratgarh
BOQ
| Sl. No. | Item Description |
| 1 | BOQ ( COMPREHENSIVE MAINTENANCE WORKS OF OTM BUILDINGS IN DOMESTIC AREA AT AF STATION SURATGARH ) |
| 2 | Demolition of brick masonry built in cement mortar including all quoins, arches and removing from site etc. complete all as specified and directed. |
| 3 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cm 1 : 6 complete all as specified and as directed by Engr-in-Charge. |
| 4 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish from the premises. complete all as specified and as directed. |
| 5 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site complete all as specified and direcetd. |
| 6 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each and removing from site complete all as specified and direcetd. |
| 7 | Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing from site complete all as specified |
| 8 | M&L Factory made Pressed steel frames of size 105mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 9 | M&L Factory made Pressed steel frames of size 125mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 10 | M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work all as specified. |
| 11 | S&F 35 mm thick 2nd class Hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated completely all specified and directed. |
| 12 | S&F factory made 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkatsNote: Glass/wire gauge shall be measured and paid for seperately. |
| 13 | S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified. |
| 14 | S&F as in replacement aluminum handles 150 mm size cast type complete all as specified and directed. |
| 15 | S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified. |
| 16 | S&F aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, complete all as specified. |
| 17 | S&F galvanised Steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed. |
| 18 | M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each panes as specified. |
| 19 | M& L in replacement for 18mm thick solid HDHMR board with 0.9-1.20mm thick sunmica leminated sheet of thickness not less than 1.0 mm on both side of two different colours (colour finish) as in kitchen cabinet shutter, jointed to form cabinet by means of Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including beddding, providing & fixing of Stainless steel piano hinges suitable for 18/19 mm HDHMR Board (minimum of 02 Nos for Each leaf ) to hold cabinet shutter , Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter), complete all as specified and as directed. Note: (a) Quoted unit Rates are inclusive of PVC board, hinges, screws and adhesive etc.(b) For the purpose of payment area of board alongwith decorative laminated sheet shall be measured. |
| 20 | Factory made single extruded WPC (Wood Polymer omposite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 21 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt inges and necessary S S screws shall be paid separately) |
| 22 | S& F in replacement factory made box type glazed and gauged steel window/ventilator made out of ERW hollow P&T section 50 x25 mm . Both window to be welded together with flat iron 25x3mm to outer frames on both sides complete all as specified including MS grill and necessary formwork complete and including shop coat redoxide primer with following fittings welded to frame/shutter:-(a) Hold fast 150mm long 25mmx6mm iron made to shape-02 Nos in each window (both sides)(b) Handle of 'Z' section 20mmx25mm Each leaf(c) 100mm stopper-01 No per leaf.(d) MS tower bolt 150mm long - 02 Nos in each leaf.(e) Cleat 55mm long of hollow square 15mm x 15mm x 24mm welded to hinges gauze wall thickness welded to hinges of 50mm size-01 No per leaf.(f) MS box type hinges of size 75x12mm-03 Nos per leaf(g) Fabrication & fixing complete(h) Flat iron for fixing work complete.Note:- (i) Glass panes, wire gauze and painting shall be measured & paid Separately under respective |
| 23 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fastenersof required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-chargeNote : Glass/Wire guage shall be measured and paid saparately. |
| 24 | S&F powder coated any colour Anodised aluminium frame for doors, windows, ventilators (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 25 | M&L sheet glass 5.5mm thick, ordinary quality and glazing with, rubber packing exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge |
| 26 | S&F as in replacement Mortice lock, vertical type, size 100 mm made of brass with two lever complete all as specified |
| 27 | S & F as in replacement Aluminium die cast body door closer hydraulically regulated designation No. 3, universal type suitable for door shutter 851 to 1000 mm in width and 61 to 80 Kg in weight complete all as specified and directed. |
| 28 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and complete all as specified and directed. |
| 29 | Supply & fixing Aluminium powder coated glazed three track sliding window of frame 92 x 38x 1.5 mm thick and sliding shutter of section 40 x 18 mm x 1.5 mm including 4 mm thick sheet glass ordinary quality in two track shutters and in one track stainless steel wire cloth, .56 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel staples including all fitting such as aluminium handle of size 100 mm and locking arrangements with each moving leaf aluminium jali, MS Grill with 30 mm x 5 mm flat iron Square bar @ 10 cm c/c complete all as specified and directed by the engineer in charge. |
| 30 | M&L for 1st class hard wood (Teak) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 31 | S&F 35 mm thick plain framed designer Pannelled shutter made of first class hard wood teak as stiles made out of single wood piece, timber piece tougned and glued to each other at joints, rendering door surface level to smooth and even, fixed to wooden frame with & including polishing of door as approved by Egnrs -in-charge complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F Brass handles cast type Polished bright of 150 mm size. complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&F Brass barrel tower bolts of extruded section of 200 mm length. complete all as specified and directed by Engineer-in-Charge |
| 34 | S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixedlength of bolt 250 mm, bolts not less than 16mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and directed by Engineer-in-Charge |
| 35 | M&L Granite of thickness not less than 18 mm of any type work(table rubbed and polished) in steps, jambs,pillars windows cill cooking platform and like including pointing in white/colour cement and pigment to match with shade of granite including bull nosing of external,including demolition of stone slab and tiles of any description or thickness complete all as specified and as directed. complete all as specified and directed. |
| 36 | M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub base,flooring, pavings etc complete all as specified and as directed. |
| 37 | M&L for providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade conforming to IS: 15658:2006 with lates amendments with approved colour design & pattern as in footparth, hape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper blocks into the sand bedding layer hrough vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all a specified and directed |
| 38 | Providing and laying 80mm thick factory made conforming to IS: 15658: 2006 incl amendments if any chamfered edge cement concrete rubberised paver block of M-40 grade with approved colour, design & pattern as in footpath or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 39 | Demolition fo stone slabs/ tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar and removing rubbish from the premises. Complete all as specified and directed. |
| 40 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 41 | M&L for First quality glazed ceramic coloured tiles of (450x350mm) x 7 mm thick, laid on vertical surfaces of wall such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles with & including dismantling of existing tiles of any description ,complete all as specified and directed by the Engineer in Charge. |
| 42 | M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,with & including dismantling of existing tiles of any descriptioncomplete all as specified and directed by the Engineer in charge. |
| 43 | M&L for First quality, vitrified coloured tiles, 8 to 9 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sq.m but not exceeding 0.38 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,with & including dismantling of existing tiles of any descriptioncomplete all as specified and directed by the Engineer in charge. |
| 44 | All as per srl item 42 here in before but tiles as on vertical surfaces. |
| 45 | M&L for machine cut polished kota stone slab flooring of size of Kotastone not less than 550 mm x 550 mm and 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 20mm thick screed bed in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly. |
| 46 | M&L for rubbesied chequered cement concrete tile 30 cm x30cm x 25 mm thick set jointed and pointed in cement slurry and using pigments laid over and including screed bed 15 mm thick in CM 1:6 as in floors. Complete all as specified and directed. |
| 47 | Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water and removing rubbish from the premises etc. complete all as specified and directed. |
| 48 | M&L for 12 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed. |
| 49 | Material and labour for 15 mm thick rendering in cement mortar 1:4 mixed with approved water proofing compound on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement all as specified and directed.Note: Water proofing compound shall be measured and paid separately. |
| 50 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection/ ceiling and surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 51 | M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6mm to 8mm as directed, mixed with coarse sand, fine sand and cement in the ratio of 1:1:1, finished even rendereing with under coat 15mm thick cement and sand mortar 1:3 complete all as specified and directed |
| 52 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper surface, complete all as specified and directed. |
| 53 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed. |
| 54 | Applying two coats of exterior acrylic emulsion (weather proof treatment ), in plain patterns, over new plastered surfaces , including preparation and using primer,complete all as specified and directed. |
| 55 | M&L for complete removal of old existing treatment from wall surfaces and applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflaging patterns, over surfaces , including preparation and using primer,complete all as specified and directed. |
| 56 | M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 57 | S&F in replacement viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe of superior quality complete all as specified and directed. |
| 58 | S&F in replacement, PVC valveless, dual type, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed. |
| 59 | S&F as in replacement 15mm bore Pillar taps cast copper alloy, with capstan head, fancy type, chromium plated, weight not less than 665 gm screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe |
| 60 | S&F in replacement stop/angle valves, 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified and directed. |
| 61 | S&F in replacement bib tap, 15mm bore, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 62 | S&F in replacement PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified. |
| 63 | S&F as in replacement Rotational moulded plythelene white water storage tank tripple layered white coloured, 500 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed. |
| 64 | M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe removal from site. complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed |
| 65 | M&L for Galvanised iron tubing 20mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe removal from site, complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed |
| 66 | S&F in replacement coloured vitreous china wash down water closet with cascade type fitting with syphonic action dual type flushing cistern in single piece pattern with inlet, ball valve, float and double push button, incl fixing bolt, plastic water closet seat cover closed pattern with bottom and cover and mild steel chromium plated hinging device with one toilet paper holder, one health faucet and one CP jet spray with 2 x 1 m CP flexible tube complete all as specified and directed. |
| 67 | Dismantling for Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified. |
| 68 | S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructionscomplete all as specified and directed. |
| 69 | M & L rolled mild steel as in framing for cladding and the like fixed with angle cleats and connecting plates Fe410-W (Gde-E-250) quality-A all as specified and directed by Engr-in- charge |
| 70 | Dismantling structural steel or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 71 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness with grid of any type and pattern including cover fillets and removing from site complete all as specified and directed by engr-in Charge. |
| 72 | S&F of aluminium composite pannel (ACP) false ceiling of colour (as approved by Engr-in charge) made out of 3mm thick (wt not less than 4.11 kgs/m2) ACP material consisting of 2 mm thick FR grademineral core sandwiched between two aluminium sheets (each 0.5 mm thick). The ACP Pannel sheet shall be coil coated with Kynar 500 based PVDF/Lumiflon based flouropolymer resin coating of approved colour and shade on face # 1 and polymer (service) coating on face # 2 as specified including Hangers 4 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified. stainless steel screws, nuts, bolts, washers, cleats, etc with & including Aluminium frame work of aluminium section 60x40x1.9 mm thcik as required or as per manufacturer instruction as per site requirements. complete all as specified and directed. |
| 73 | S&F decorative PVC Wall lining fluted louvers consisting of 8mm thick Plain/ colour PVC sheet inclusive of solvent cement and fixing at site complete all as specified & directed by Engr -in charge. |
| 74 | Hacking out old broken glass of any thickness , size and description n exc 0.50 sqm in each pane metal frame glazing with oil putty or fixed with beadings etc.complete all as specified and directed . |
| 75 | S & F as in replacement 10mm toughned glass as in hinged doors/ partitions/ automatic doors and similar works including cutting to shape drilling holes required complete all as specified and directed. |
| 76 | Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed. |
| 77 | Supply and fixing 35 mm thick designer (as approved by GE) louvers and jallies in Precast cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) fixed on wall in cement mortar 1:4 including solid pillar between two jafri complete all as specified and directed. |
| 78 | S&F as in replacement 12 mm thick toughned glass for door with proper grinding and rounding of edges , incl two no of stainless steel handle in each leaf ,handle size 45cm and 25mm dia. With lockin arrangement,hydraulic machine at the bottom for each door and pivots as per manufacture instruction,complete all as specfied and as directed . |
| 79 | S&F in replacement vitreous China Urinal, Half stall type (White) , including providingand fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush/waste pipe, grating and Union for discharge pipe. (inclusive of fixing supply pipe to trap, waste pipe and urinal spreader) , complete all as specified and as directed. |
| 80 | S&F in replacement for fancy type ceramic counter sunk wash hand basin bowl shape of size 440 x 525 x 195 mm incuding 32 mm dia waste coupling , waste pipe ,wall flanges and connection pipes etc all necessary accessories, complete all as directed |
| 81 | S&F of False ceiling complete, consisting of 9 mm thick perforated Gypsum Board Tile of size 600x600 mm, with aluminium foil backing on one side, laid over GI Powder coated exposed Grid system of 605x605mm module, consisting of Main T and Cross T size 24x38x0.35mm, suspended from ceiling by 10 Guage GI vertical Hangers @ 1200 mm C/C and ISA 32x32x3 mm Angle @ 300 mm C/C, fixed to RCC ceiling with 02 Nos 16 mm Dia x 120 mm long Dash Fasteners, including cutting for Light /AC grill openings. Complete all as specified and directed. |
| 82 | S&F reflective cautionary square building sign board/ Number board of size 0300mm × 300mm made of ACP sheet 3mm thick fixed on wall with screws. front side of the sign board fully reflective with high intensity reflective sheet with required letter, as per approved by Engineer in charge and border duly computer cut sign board supported complete all as specified and as directed |
| 83 | M&L 2 coats of synthetic enamel paint on kerb stone/ road side kerb plastered or PCC Surfaces of any description, including preparation of new surfaces complete all as specified & directed. |
| 84 | M&L for 2 coats of synthetic enamel paint on kerb ston/ road side kerb plastered or PCC Surfaces of any description, including preparation of old plastered surfaces complete all as specified & directed. |
| 85 | M&L for rubbing, grinding of existing floor for achieve Mirror polishing on marble / Kota stone where ever required (verticle/horizotal surface) to give high gloss finish complete all as specified and directed. |
| 86 | M&L Tensile Canopy cantilever structure made of PVC coated high tenacity polyster fabric Weight not less than 900 gsm/sqm, width -320mm,having tensile strength -280/280DAM/5cm,Adhesion-10/10 DAM/5cm,treated with Secfesh treatment,Flame retardancy M-2/nfp 92-507 to ISO9001, ISO14001, Light transmission 13.50 % complete all as specified & directed by Egrs-In-Charges |
| 87 | Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary of tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender