Defence Statutory Bodies & Commissions/Committees Closing in 5 days TDR #58405690

Tender For Special Repair To Bldg No T-512, T-513, T-514, T-516, T-647 (Toilet & Bathroom) Of 8 Kumaon At Rhenock Under Ge 867 Ews.

Issued by Statutory Bodies & Commissions/Committees · South District, Sikkim
Tender Value
23.79 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
5 days left
EMD
47580
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
South District → Sikkim
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair To Bldg No T-512, T-513, T-514, T-516, T-647 (Toilet & Bathroom) Of 8 Kumaon At Rhenock Under Ge 867 Ews.

BOQ

Name of Work:- SPECIAL REPAIR TO BLDG NO T-512, T-513, T-514, T-516, T-647 (TOILET & BATHROOM) OF 8 KUMAON AT RHENOCK UNDER GE 867 EWS.
Sl. No. Item Description
1Dismantaling of plain or corrugated steel sheeting, any gauge , thickness including nainital pattern roof covering, etc. complete all as specified and as directed.
2S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws, etc. complete all as specified and as directed.
3Dismantaling wrough iron or mild steel work of any description, etc. complete all as specified and as directed.
4S&F rolled section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angles cleats or other connecting plates in FE-410W (Gde E-250) quality A, etc. complete all as specified and as directed.
5Taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
6M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface finish even and smooth without using extra cement, etc. complete all as specified and as directed.
7M&L for 20mm thick rendering in CM 1:4 in two layers of 10mm each on other than fair faces of brick or block concrete masonry of walls finished even and smooth without using extra cement including mixing with WPCfinished even and smooth w/o using extra cement
8M&L for preparation of new plastered or unplastered surfaces of wall and applying three coat of white wash, etc. complete all as specified and as directed.
9M&L for Preparation of new steel surfaces, of any description, over 10cm width or girth not other wise describedand and applying two coat of synthetic enamel paint over one coat of red oxide primer, etc. complete all as specified and as directed.
10Dismantling floor, hearth or wall tiling including cement mortar bedding, backing, removing serviceable tiles to store and rubbish off the premise, etc. complete all as specified and as directed.
11M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying of floor finishes, etc. complete all as specified..
12M&L for 7 to 8 mm thick Non Skid ceramic colour tilles (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc. complete all as specified and as directed.
13M&L for 10mm thick rendering in CM 1:4 on fair faces of brick or cement concrete surfaces for fixing of wall tiles, etc. complete all as specified and as directed.
14M&L for 300 x 200mm x 6mm thick glazed ceramic coloured tiles on vertical surfaces such as skirting, dados & risers to steps set & Jointed in neat cement slurry & pointed in colored cement to match, etc. complete all as specified and as directed.
15Taking down chowkats or frames with shutter(without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.00 sqm each, etc. complete all as specified and as directed.
16S&F Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings as per specification & drawing, etc. complete all as specified and as directed.
17S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification, etc. complete all as specified and as directed.
18S&F 100mm size butt hinges of medium weight mild steel cold rolled, etc. complete all as specified and as directed.
19S&F 300mm long aluminium alloy, anodised sliding door bolts with haps staple (bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed, etc. complete all as specified and as directed.
20S&F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed with screws, etc. complete all as specified and as directed.
21S&F 125mm size Aluminium anodised handles of cast type and fixed with screws, etc. complete all as specified and as directed.
22S&F Vitreous China squtting pan, Orissa pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), etc. complete all as specified and as directed.
23S&F 10 ltrs capacity low level PVC valve less, syphonic action type flushing cistern, with inlet, ball valve float, flush pipe and handle including brackets, etc. complete all as specified and as directed.
24S&F 15mm dia fancy type CP Bib taps of cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe with wall flanges, etc. complete all as specified and as directed.
25S&F 15 mm bore fancy type CP Stop cock of cast copper alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions with wall flanges, etc. complete all as specified and as directed.
26S&F 600 X 450 mm bevelled edge mirror, of selected quality glass, mounted on 6mm thick AC building board or commercial playwood and fixed to wooden plugs with chromium plated brass screw and cup washer, etc. complete all as specified and as directed.
27S&F 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, etc. complete all as specified and as directed.
28S&F 110mm bore PVC (SWR) bends any radius, etc. complete all as specified and as directed.
29S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, etc. complete all as specified and as directed.
30S&F 75mm bore PVC bends with including for all necessary extra joints cuttings and waste to any radius, etc. complete all as specified and as directed.
31S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, etc. complete all as specified and as directed.
32Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes, etc. complete all as specified and as directed.
33M&L for Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm size copper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade, FRLS, PVC insulated unsheathed cable and including PVC casing and Caping, with accessories fixed on walls/ ceilling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 3.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 3.0 mm thick laminated sheet top coversOne light point controlled by one switch, etc. complete all as specified and as directed
34Description all as per item No 33.00 here in before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable, etc. complete all as specified and as directed.
35S&F 5/15A Switch socket combination 2 – in – one 6 Pin , flush type universal, etc. complete all as specified and as directed. Make : Anchor/Havells/Plaza
36S&F Lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting, etc. complete all as specified and as directed.
37S&F 9W LED Bulb suitable for B22 holder . System Efficacy should be > 85 lm/ W. PF > 0.9, The Lamp Should have Cool Daylight Color temp of 6500K, lumen output >800 lm, etc. complete all as specified and as directed. Make: Philips/Wipro/Crompton
38S&F 5A Switch piano flush type single pole one way , etc. complete all as specified and as directed.
39M&L for 65 X 50mm Ceiling rose surface bakeletile three terminal, etc. complete all as specified and as directed.Make : Anchor/Havells/Plaza
40S&F 1x 18W LED tube lights fitting, 4 feet long, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, etc. complete all as specified and as directed.
41S&F 10W LED light fitting mirror type with high out put diffuser 2 feet, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, etc. complete all as specified and as directed.
42S&F Electric storage type water heater of 25Ltr capacity, 2000Watt, vertical type including necessary angle cock, inlet and outlet water connecting pipe and electric connection, etc. complete all as specified and as directed.Make/Model No : \\"Misty 25 Ltr\\" of make : Usha or similar model of RACOLD/BAJAJ
43Dismantling and taking down unserviceable main switches, DB etc. any type / size and making good disturbed surfaces to match with the existing finishes, etc. complete all as specified and as directed.
44S&F Sheet metal enclosure double door 4 way DBs SPN, 240V with 200 Amps rated bus bars double door, etc. complete all as specified and as directed.Make : L&T/ Legrad/ Semens
45S&F 40-63A MCBs, SPN, 240 volts, breaking capacity 10KA, rating, etc. complete all as specified and as directed.Make: L&T / Legrand /C&S/Havells
46S&F MCB, SP,240 volts, breaking capacity 10 KA, rating 6 to 32 amps, etc. complete all as specified and as directed.Make: L&T / Legrand /C&S/Havells
47M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25/16 mm PVC casing and caping medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length, etc. complete all as specified and as directed.
48M&L for Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point, etc. complete all as specified and as directed.
49S&F 1100 volt grade heavy duty PVC insulated solid aluminium conductor cable of cross-sectional area 10 sqmm size (one twin core cable flat or circular served with inner sheathing of PVC tape and overall PVC sheathed) in service connections, suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire and testing on completion, etc. complete all as specified and as directed. Make: PolyCab/Plaza/KEI/Finolex.
50Excavation in trenches for laying cable/poles etc n.exc in 1.5mtr deep including getting out in any type of soil.
51Returning,filling in including spreading leveling and well ramming n.exc 25 cm in any type of soil , etc. complete all as specified and as directed.
52Removing excavation material (spoil) to a distance and economy 150m and depositing where as directed at a level n.exc 1.5 mtr above the starting point, etc. complete all as specified and as directed.
53M&L for 25 mm dia GI tubing of edium grade with all fittings laid in trenches or fixing in wall, etc. complete all as specified and as directed.
54Cutting, screwing, threading and fixing GI tubing for alteration or addition size of 40/ 25 mm dia GI tubing, etc. complete all as specified and as directed.
55S&F in repairs 25mm dia Gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, etc. complete all as specified and as directed.
56S&F in repairs 25mm bore ball brass valves high pressure with polythene float and flynuts complete screwed for iron pipe, etc. complete all as specified and as directed.
57M&L for Providing precast cement concrete solid building block type C-1 (1:3:6) (using 20mm graded stone aggover) 10cm in width and setting in CM 1:6, etc. complete all as specified and as directed.
58M&L for PCC type C-2 (1:3:6) (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and as directed.
59M&L for PCC type C-1 (1:3:6) (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating, as directed and necessary from work, etc. complete all as specified and as directed.
60M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces and finished even and smooth without using extra cement, etc. complete all as specified and as directed.
61M&L for preparation of new plastered surfaces of walls and applying two coats of white wash on walls, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information
62M&L for preparation of new plastered surfaces of walls and applying two coats of white wash on walls, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58405690
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 23.79 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair To Bldg No T-512, T-513, T-514, T-516, T-647 (Toilet & Bathroom) Of 8 Kumaon At Rhenock Under Ge 867 Ews.
Basic Detail
Tender No 8661/E8
Bidding Type Tender
Location
City South District
State Sikkim
Key Dates
Publish Date 05 Nov 2026
Submission Date 26 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 23.79 Lakhs
Tender Fee 500
EMD 47580
Exemption Available
Document List
12f9a00d-ed8a-486a-bd0a-7790d08acb10.html
BOQ_894646.xls
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

12f9a00d-ed8a-486a-bd0a-7790d08acb10.html

xls

BOQ_894646.xls

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender