Tender For Provn Of Raw Water Pipeline Of 80Mm Gi With Pumping Arrangement For Arboriculture On E3 Area Link Road At Nda Khadakwasla
Tender Value
43.60 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
16 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Raw Water Pipeline Of 80Mm Gi With Pumping Arrangement For Arboriculture On E3 Area Link Road At Nda Khadakwasla
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in hard /dense soil not exceeding 1.5 metre wide and not exc 1.5 metre in depth and getting out for taking out / laying of GI pipe line and making bottom surfaces of excavation leveled and to a gradient. |
| 2 | Returning filling in including spreading levelling watering and well ramming lin layers not exceeding 25 cm after the pipes have been laid all as specified and directed. |
| 3 | Removing excavated material / soil to a distance n. exc 50 m above starting point complete all as specified and directed. |
| 4 | Supply and laying in trenches / on ground GI tubing 'Medium grade' of 20 mm bore with all fittings like reducer Tee, socket,elbow etc complete ( excavation of earth work shall be measured and paid seperately. |
| 5 | Supply and laying in trenches / on ground GI tubing 'Medium grade' of 50 mm bore with all fittings like Tee,socket,elbow etc complete ( excavation of earth work shall be measured and paid seperately). |
| 6 | Supply and laying in trenches / on ground GI tubing 'Medium grade' of 80 mm bore with all fittings like Tee,socket,elbow etc complete ( excavation of earth work shall be measured and paid seperately).Note: Rate of pipe line marker made in 3mm thick 200x100mm MS iron plate welded with 25x4 Angle iron height 0.3 RM above the ground level and 0.15RM under the ground fill with 1:2:4 PCC as per requirement |
| 7 | S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 20mm dia all as specified and directed. |
| 8 | S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 50mm dia all as specified and directed. |
| 9 | M&L for gun metal Gate Valve, screwed high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed of size 80mm dia all as specified and directed. |
| 10 | Supply and fixing of heavy duty ball type Non-Return Valve, 80 mm nominal bore, Class PN 1.6, complete with all necessary minor fixing arrangements, nuts, bolts, gaskets and accessories, complete in all respects as specified and directed |
| 11 | Supply and fixing of 80 mm nominal bore, ISI marked, single orifice Air Release Valve, Class PN 1.0, complete with all necessary minor fixing arrangements, nuts, bolts, gaskets and accessories, complete in all respects as specified and directed |
| 12 | Supply, erection, testing and commissioning of openwell/submersible pump of 30 HP, 3-phase, 415 V, 50 Hz, suitable for developing a maximum head of 80 metres and delivering a maximum discharge of 10 litres per second, complete with 100 mm suction and 80 mm delivery connections, including all necessary fittings, accessories, supports, cable termination and other incidental works, complete in all respects as specified and directed |
| 13 | Supply, installation, testing and commissioning of fully automatic Star-Delta motor starter, housed in sheet steel enclosure, suitable for AC 3-phase, 415 Volts, 50 Hz supply, for 30 HP electric openwell submersible pump motor, complete with AC-3 duty main, star and delta contactors, thermal overload relay MN-5 of range 30–75 Amp, auxiliary/white contactor MN-4W, timer, in-built motor protection and metering features, short circuit and single phasing protection, indication lamps, ON/OFF push buttons, control MCB/fuses, terminal blocks, internal wiring, cable glands, earthing terminals and all necessary accessories, complete in all respects as specified and directed by Engineer-in-Charge. Make: L&T, BCH, Siemens or equivalent of other approved makes. |
| 14 | M & L for valve pit chamber including foundation with 230 mm thick brick wall in CM (1:6) 75 mm thick coping with PCC 1:2:4 type B1, 15 mm thick plaster work in CM 1:4 over all internal and external wall with white wash of both surface and Chequered plate cover of 3mm thickness for Valve Pit Chamber of size upto 900x900x750 mm with hinges, fixing with equal angle iron frame(40x40x4mm) and necessary locking arrangement painting of synthetic Enamel paint over coat of red oxide primer on Plate including dismantling existing damaged portion of chamber and removal of all debris all as specified and directed . |
| 15 | Supply and fixing of 10 Sq mm, 3-core, 1100 Volts grade, copper conductor, flat submersible pump cable, suitable for 30 HP, 3-phase, 415 Volts openwell submersible pump motor, complete with necessary cable glands, lugs, termination accessories, jointing/connecting to pump motor and starter, including all necessary clamps, supports, identification and minor accessories, testing and commissioning, complete in all respects as specified and directed |
| 16 | M& L in PCC type D2 1:3:6 (40mm graded aggregates) as in foundation filling and mass concrete of Valve pit of any size all as specified and directed. |
| 17 | M&L for Mak Premix Ready Mix Road Repair Patching Compound, 25 Kg per bag for Roads Floor, and making good after laying of pipe with removed soil/dabries/dust and finally sealed with patchmat of thickness not less than to match with the top surface of Road all as specified and directed. Note: The qty of patch mat measured as per actual ground requirement. |
| 18 | M & L for pipeline markers comprising 3 mm thick MS plate of size 200 × 100 mm, duly engraved with the identification of the GI pipeline, securely welded to 25 × 4 mm MS angle iron. The MS plate and angle iron shall be thoroughly cleaned, provided with one coat of suitable anti-corrosive primer and two coats of approved enamel paint. The angle iron shall be embedded firmly in the ground to a depth of 0.20 m below ground level and shall project 0.30 m above ground level, including excavation, backfilling and compacting of earth around the marker, welding, painting, lettering/marking and all materials, labour, tools and plants, complete in all respects as specified and directed Earthing complete with galvanised iron earth plate electrode 600 x 600 x 6mm as earthing lead buried directly in ground vertically to depth not less than 2.25 mtr below GL with the top edge of the plate not less than 1.5 mtr from GL, connected to GI earth lead of 4.0mm dia, by means of bolts & nuts, to GI and connected to earthing test point all as shown in electrical plate No. 3 of SSR Part-I of 2009* specified or indicated and testing on completion including excavation / earth work in any type of starta, PCC (1:3:6) type C1 earthing chamber pre cast slab 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric (XPM) weight not less than 4 KG/sqm cast iron frame, funnel with wire mesh GI watering pipe of 20 mm bore medium grade and lugs with and including GI earth wire 4 mm dia with GI protection pipe of 15 mm medium grade 7.5 meter long etc complete tested on completion all as specified and directed.Note: 1. Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. 2. GI wire above 7.5m will be measured and paid seperately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender