Tender For Development Of Park And Green Belt Marginal Land Near 1-P To 14-P Along 45 Mt. Wide Road Sector-82 Faridabad (Construction Of Toe Wall With Grill Fencing And Green Belt And Park, Footpath In Park, Benches, Dustbin, Open Gym, Children Playi
Tender Value
26.21 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
5 days left
EMD
52440
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridabad → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Park And Green Belt Marginal Land Near 1-P To 14-P Along 45 Mt. Wide Road Sector-82 Faridabad (Construction Of Toe Wall With Grill Fencing And Green Belt And Park, Footpath In Park, Benches, Dustbin, Open Gym, Children Playing Equipment, Planting Of Plants, Turfing Lawn Fine Grassing With maintenance Including With 03 Years maintenance And Defect Liability Period Free Of Cost With Civil Work. A/C Rs. 26.22 Lakh E/M Rs. 52440/- T/L 560 Days
BOQ
| Sl. No. | Item Description |
| 1 | [4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil [Through Rate] |
| 2 | [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand) [Through Rate] |
| 3 | [10.29.2]Providing and laying of chequered terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 2. Medium shade pigment using 50% white cement, 50% ordinary cement [Through Rate] |
| 4 | [13.19]Providing and fixing galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm fixed on steel windows of standard rolled steel section, with 3 mm thick MS flat iron cover moulding of 12.5 mm width, fixed with machine screws welded complete in all respects. 0 0 0 [Through Rate] |
| 5 | [13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [Through Rate] |
| 6 | [11.62.2]Colour washing such as green, blue or buff to give an even shade : 2. New work (two or more coats) with a base coat of whiting [Through Rate] |
| 7 | [10.100.2]Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth. [Through Rate] |
| 8 | [11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. [Through Rate] |
| 9 | [17.15.2]Granular Sub-Base with Coarse Graded Material - Grading-I or II or III (Table:- 400-2) Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.of MORTandH specifications 2. Grading II material [Through Rate] |
| 10 | [7.20.2]Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement Mortar 1:6 (1 cement : 6 coarse sand) [Through Rate] |
| 11 | [7.27.2]Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in foundations and plinth in : 2. cement mortar 1:4 (1 cement : 4 coarse sand) [Through Rate] |
| 12 | [26.1]Supplying and stacking at site of work well-decayed farm-yard manure from any available source, approved by the Engineer-in-charge including screening through sieve of I.S.designation 16 mm with 5 km lead. [Through Rate] |
| 13 | [26.2]Supplying and stacking of good quality top layer garden earth free from debris and weeds, at site including royalty and carriage/lead 5 km (good earth measured in stacks will be reduced by 20 % for payment) only for filling of pots and flower beds . 0.00 0.00 0.00 [Through Rate] |
| 14 | [26.9.3]Turfing lawns with fine grassing ( selection no.1/ Bermuda and Mexican/Neelgiri grass )including ploughing, dressing including breaking of clods, removal of rubbish, dressing and supplying of selection no. 1 / Bermuda doob grass and Mexican/Neelgiri grass roots, including supplying and spreading of farmyard manure at the rate of 0.60 cum per 100 sqm, maintenance till weed free turf is formed 3. Planting selection no. 1 grass roots in rows 10 cm apart in both directions . [Through Rate] |
| 15 | [26.10]Maintenance of fine grass lawn for one year including fertilizer application, DAP @ 20gm/sqm, urea 40gm/sqm, watering, weeding, top dressing with good earth and manure mixture 2:1 @ 0.01cum per sqm, maintaining fine level, regular mowing and removal of rubbish with all lifts and leads. [Through Rate] |
| 16 | [26.13.3]Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately) 3. Hole 0.75 metre dia and 0.75 metre deep [Through Rate] |
| 17 | [26.13.4]Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately) 4. Hole 0.60 metre dia and 0.60 metre deep [Through Rate] |
| 18 | [26.14]`Supplying and planting in prepared pits and watering, healthy , vigorous growing , permanent trees including ,application of 10 ml chlorpyriphos 20% EC, planting desired disease free, 200 cm to 220 cm height ,5 cm to 6 cm calliper size stem , full of foliage ornamental tree sapling each to be supplied in 30cm x 30cm poly bags,` [Through Rate] |
| 19 | [26.15.1]Maintenance of tree including fertilization, application of insecticide, watering, weeding, training, pruning, 1. Maintenance of tree for one year for the 1st three years of age including weeding, hoeing , plant protection , watering from Deptt. source , application of 10 ml chlorpyriphos four times, 0.0289 cum FYM each,50 gm urea and 50 g DAP twice ,replacement of casualty ,disposal of debris and other activities.etc. [Through Rate] |
| 20 | [26.18]Supply and planting of disease free healthy , vigorous growing more than 75 cm height permanent shrubs in already prepared pits, supplied in 25 cm x 20 cm poly bags , application of 10 ml chlorpyriphos 20% E.C. termiticide each and watering supplied through the tractor tanker. [Through Rate] |
| 21 | [26.19.1]Maintenance of shrub for one year including weeding, hoeing, plant protection, watering from Deptt. source, application of 10 ml chlorpyriphos four times in a year , 0.0289cum FYM each, 20 gm urea and 20 gm DAP twice, replacement of casualty etc. with same species and same age of plant 1. Individual shrubs [Through Rate] |
| 22 | [26.32]Planting permanent edging plants around beds, lawn or along paths including of digging of trench 45 cm wide to 15 cm depth, refilling the excavated earth, mixed with farm-yard manure, supplied at the rate of 0.9 cum per sqm and supplying and planting hedge/ edge at 20 cm apart in one or two rows @11no. well trimmed bushy ,multi branched ,30 cm to 45 cm in height plants to be supplied in 15 cm x 15 cm poly bags per sqm . [Through Rate] |
| 23 | [26.33]Maintaining the permanent edging plants for the one year including application of FYM @ 0.0289 cum ,chlorpyriphos 9ml, urea and DAP 40gm each per year ,watering, hoeing weeding trimming and shaping ,replacement of casualty as and when noticed. [Through Rate] |
| 24 | [26.58.1]Supply and installation of garden bench 1. Chair type garden bench with L-shaped sides made of reinforced concrete (M30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. All materials required to be as per BIS specifications. [Through Rate] |
| 25 | [26.76]Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete. [Through Rate] |
| 26 | [6.1.2]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) [Through Rate] |
| 27 | [6.8.3]Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) 3. 25 mm thick [Through Rate] |
| 28 | [6.29.1]Centering and shuttering including strutting, propping etc. and removal of form work for : 1. Foundations, footings, bases for columns [Through Rate] |
| 29 | ANALYSIS OF RATES FOR PROVIDING AND FIXING OF RUBBER HOSE PIPE 1” DIA DOUBLE THREADED and DOUBLE PLY 1ST MARKED and KG.1/CM/2 |
| 30 | Analysis of rate for providing and fixing of water supply connection with road cut in the parks/green belt. |
| 31 | Air Swing: Providing designing and fixing of Air Swing pair of size 1200x900x1580 mm fabricated with main post of 140mm dia and other pipes of 50mm dia and 40x60mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 32 | Sit Up Station: Providing, designing and fixing of sit up station pair of size 1350 x1370x 700 mm fabricated with main post of 140mm dia and other pipes of 50mm dia and 32 mm dia 3.2 mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 33 | Air Walker : Providing, designing and fixing of Air Walker of size 1140x450x1560 mm fabricated with main post of 140mm dia and other pipes of 42 mm dia and 40x60 mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 34 | Horse Rider Station : Providing, designing and fixing of Horse Rider Statin of size 1200x4600x1300mm fabricated with main post of 140mm dia and other pipes of 50 mm dia and 42mm and 32mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 35 | Stair stepper : Providing, designing and fixing of Stair stepper pair of size 900x900x1580 mm fabricated with main post of 140mm dia and other pipes of 60 mm dia and 50 mm dia 32mm and 40x60mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 36 | Leg Press : Providing, designing and fixing of Leg Press pair of size 1940x520x1450 mm fabricated with main post of 140mm dia and other pipes of 60 mm dia and 32 mm dia and 40x60 mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 37 | Chain Swing two seater: Providing designing and fixing of chain swing two seater of size 3100x1780x2440mm fabricated with main post of 60mm dia and 3.00 mm thick and other pipes of 25 mm dia with 2.5 mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized with 8 mm gl chain and powder coated using AKzo Nobel or equivalent of 100-130 micron thick. |
| 38 | MGR : Providing, designing and fixing of MGR fabricated with main post of 88 mm dia and 3.00 mm thick and other pipes of 27 mm dia with 2.5 mm thickness all pipes and powder coated using Akon Nobel or equivalent of 100-130 micron thick. |
| 39 | Standing Sea Saw : Providing , designing and fixing of standing sea saw fabricated with main post of 88 mm dia and 3.00 mm thick and other pipes of 27 mm and 32mm dia with 2.5 mm thickness all pipes/ms part made up of hot rolled tubular steel and powder coated using Akzo Noble or equivalent of 100-130 micron thick. |
| 40 | Sea Saw: Providing: designing and fixing of standing sea saw fabricated with main post of 88 mm dia and 27 mm and 32 mm dia with 2.5 mm thickness all pipes/ ms part made up of hot rolled tubular steel and powder coated using Akzo Nobel or equivalent of 100-130 micron thick. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender