Tender For Supplying, Installation, Testing, And Commissioning (Sitc) Of Automatic Water Mist Spray Systems (Mist Rings On Existing/Erected Pillars And Roundabout Systems For Airbone Dust Suppression In Mc Sonipat
Tender Value
61.65 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
4 days left
EMD
1.24 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonipat → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supplying, Installation, Testing, And Commissioning (Sitc) Of Automatic Water Mist Spray Systems (Mist Rings On Existing/Erected Pillars And Roundabout Systems For Airbone Dust Suppression In Mc Sonipat
BOQ
| Sl. No. | Item Description |
| 1 | Misting Pillar• SS 304 mist pillar with customised CNC design: SS 304 frame inside and at base• Powder coated in an approved shade as per shade card• Fixed with SS 10 mm (±5% tolerance) mist line, with bush welded to fix the nozzles• Footing and related civil work for fixing the pillars on the ground.• As per drawing |
| 2 | Misting Pump• 1000 psi high-pressure direct drive / coupled misting pumps – complete, whisper-quiet, built with high-quality components• Capable of running 66 standard misting nozzles• 3 HP or above motor, 3 phase, 15 LPM (or above) |
| 3 | Electrical Control Panel• Supply, installation, testing and commissioning of indoor-type, powder-coated electrical control panel for the above pumps and equipment• Panel for 1 nos pumps (1 working )• Comprising suitable rating MCB, overload protection, single-phase protection, contactor, cyclic timer, delay timer, voltmeter, ammeter, flush valve timer and tank level controller, including necessary wire and cable of suitable rating• Including necessary supports as per site condition or as instructed by the site in-charge / engineer |
| 4 | Tubing and FittingsR2 / nylon / PE high-pressure pipe or ¼? hydraulic pipe, with required fittings i.e. connector, elbow, bend, tee etc. |
| 5 | Anti-drip SystemAnti-drip system in place of free adjustable air-injection system, with control panel |
| 6 | RO Water Tank• Triple-layer PVC water tank, total capacity 5000 litres, supplied as 3 tanks (2 × 2000 L and 1 × 1000 L)• Complete with GI / CPVC connections, fittings and support |
| 7 | RO System for Misting Water FiltrationAutomatic operated RO filtration system, 1000 LPH, skid mounted, complete with pump and accessories, including necessary supports as per site condition or as instructed by the site in-charge / engineer |
| 8 | Misting Nozzles• Nozzles for pillars• Performance: PM 2.5 reduced by 20% and PM 10 reduced by 50% compared with pre-misting conditions• Performance certificate from a reputed institute to be furnished |
| 9 | Accessories• High-pressure zone valves and low-pressure solenoid valves: electrical safety switches controlled by flow or pressure: regulating valves: pressure gauges etc.• All related hardware for connections and related CPVC fittings |
| 10 | ElectricalRequired control cable, cable box, connectors and support accessories |
| 11 | SS 304 Seamless PipeStainless steel 10/12 mm, Grade 304, seamless pipe |
| 12 | Porta Cabin• Office-size cabin, 12 ft × 8 ft × 8.5 ft (L × B × H), fabricated container• Hardware: MS main door: sliding glass window• Electrical: LED tube light (Surya / Havells / Polycab): cabin fan (Surya / Lazer): exhaust fan (Surya / Havells / Lazer): AC provision: power plugs: modular switch boards (Anchor / Roma): line connection: power DB with 32 A MCB main supply: male–female plug: bulkhead light: electric wire 1.5 mm, 2.5 mm and 4 mm (Polycab / RR)• Interior: room made with wooden panel decorated with 8 mm thick MDF, laminated finish, to the top side of the container• Insulation with 50 mm high-density glass wool to reduce thermal conductivity• Vinyl flooring: paint – primer and enamel |
| 13 | SS Pipe – Supply and Laying (Underground)• Supplying and laying of seamless stainless steel (SS) pipe, 15/16 mm OD, designed for high-pressure misting systems, up to suitable depth below ground level, with trenching and backfilling• Handles operating pressures of 70 bar: corrosion-resistant stainless steel with polished exterior• Including supplying and fixing of all other suitable accessories for connection between steel pipe and nylon pipe, cutting, welding, testing and commissioning etc. as required |
| 14 | High-Pressure Hydraulic Pipe on Pole• Providing and fixing of 19 mm (suitable size) high-pressure hydraulic pipe, ¼? R2, on the existing pole up to required height• Pressure rating 70 bar: flexible, with resistance to abrasion and chemical stability• Including supplying and fixing of all other suitable accessories for interconnection between pipe and misting nozzle, testing and commissioning etc. as required |
| 15 | SS 304 Nozzle Bracket• Providing and fixing of suitable size bracket made of stainless steel 304 grade suitable for fixing 6 nos. multi-port brass nozzles on the existing pole up to suitable height• Including supplying and fixing of all other suitable accessories for interconnection between nylon pipe and misting nozzle, testing and commissioning etc. as required• Nozzle and ring drawing shall be approved by the Engineer-in-Charge |
| 16 | Brass Misting Nozzle• Supplying and fixing of brass misting nozzle on the existing bracket, capable of throwing the water jet up to one metre radius at an operating pressure of 70 bar: precision-drilled orifice, integrated filter and corrosion-resistant finish• Including supplying and fixing of all suitable accessories for connection between misting nozzle and bracket, testing and commissioning etc. as required• Nozzle is capable of reducing PM 1, PM 2.5 and PM 10 (dust suppression): documented proof of this capability from a premier institute / laboratory to be furnished |
| 17 | Ball ValveSupplying, installation, testing and commissioning of metallic ball valve, 25 mm, including all suitable accessories for connection etc. as required |
| 18 | Digital Irrigation Sequential ControllerSupplying and installation of digital irrigation sequential controller suitable for operating the automatic misting system, including all suitable accessories such as cable, wire, thimble etc., connection, testing and commissioning as required |
| 19 | Pump Set• Supplying, installation, testing and commissioning of pump capable of discharging 50 LPM at 70 bar head, with NRV and header fittings complete, including suitable size electric cable, base frame and panel with all fittings complete as required• With 1 working and 1 standby |
| 20 | Pump StarterSupplying, installation, testing and commissioning of pump starter suitable for pump set of minimum capacity 10 HP, including all suitable accessories such as cable, wire etc., connection, testing and commissioning as required |
| 21 | Enclosure for Electrical ComponentsSupplying, installation, testing and commissioning of enclosure for electrical components, of suitable size, including all suitable accessories for installation etc. as required |
| 22 | RO SystemSupplying, installation, testing and commissioning of RO system of capacity 2000 litres per hour, with complete accessories such as suitable pump, motor, membrane, filter etc., including suitable frame and all other suitable accessories for interconnection with the water tank etc. complete as required |
| 23 | Water Storage TankProviding and placing polyethylene water storage tank, with cover and suitable locking arrangement, with necessary holes for inlet, outlet and overflow pipes, but without fittings and base support for the tank |
| 24 | Porta CabinSupplying and fixing of porta cabin, size 10 ft × 8 ft × 8.5 ft, with facility for installation of fan, lights, RO, pump and panels etc. as required |
| 25 | Power Cable• Supplying and laying of PVC insulated and PVC sheathed / XLPE aluminium conductor armoured power cable, 1.1 kV grade, on surface / open duct etc., complete as required• (a) 3.5 core × 25 sq mm |
| 26 | Cement Plaster• Cement plaster 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement• (a) 20 mm cement plaster with clamp for pipe |
| 27 | CPVC Pipes – 25 mm nominal dia• Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings: including jointing of pipes and fittings with one-step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of the Engineer-in-Charge• (a) 25 mm nominal dia pipes |
| 28 | CPVC Pipes – 40 mm nominal dia• As per item 15 (a) above• (b) 40 mm nominal dia pipes |
| 29 | GI Pipe for Cable ProtectionSupplying and fixing of light class G.I. pipe, 50 mm dia (nominal), 3 metres length, along the pole for protection of underground cable as required Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender