Tender For Design, Engineering, Manufacturing, Testing, Supply, Stringing, Installation, Testing & Commissioning Etc. For Construction Of 132 Kv Dc Kailadevi-Upeida(Imlc) Sambhal Line (Approx. 15.00 Route Km) Of Upptcl Under Transmission West, Meerut
Tender Overview
Project Description
Tender for Design, Engineering, Manufacturing, Testing, Supply, Stringing, Installation, Testing & Commissioning Etc. For Construction Of 132 Kv Dc Kailadevi-Upeida(Imlc) Sambhal Line (Approx. 15.00 Route Km) Of Upptcl Under Transmission West, Meerut, On Turn-Key Basis
BOQ
| Sl. No. | Item Description |
| 1 | Schedule-3 Summary Tender Inviting Authority: Superintending Engineer, Electricity Transmission Design Circle, 10th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001 Name of Work: Design, Engineering, Manufacturing, Testing, Supply, Stringing, Installation, Testing & Commissioning etc. for Construction of 132 kV DC Kailadevi-UPEIDA(IMLC) Sambhal line (approx. 15.00 route km) of UPPTCL under Transmission West, Meerut, on Turn-key basis Tender No: TD-571/26 Bidder Name & Address : SCHEDULE OF QUANTITIES AND PRICES (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name, Address and Values only) |
| 2 | Total Price for Supply [Schedule S-1] |
| 3 | Total Price for Work [Schedule S-2] |
| 4 | Total Price [S-1 + S-2] |
| 5 | GST @18% [18% of 3] |
| 6 | Total Bid Price including GST [3+4] Date: Signature Bidder Name: Designation : Name & Address of Company SCHEDULE S-1 : (SUPPLY OF MATERIAL) Tender Specification No.: TD-571/26 Name of Firm: S N Item Unit QTY Ex-Work per unit rate (Rs.) Freight (Rs.) P&F (Rs.) INS (Rs.) Unit FOR Destination rate (Rs.) Total Amt (Exclusive of GST) (Rs.) |
| 7 | TOWERS (a) Fabrication, galvanizing, Inspection and supply of DC towers including stubs, extension and stub-setting templates, gantry structures as per drawings & BOM (i) Mild steel MT 299.986 0.0 0.0 (b) Hot dip galvanized, Hexagon round hexagon head transmission tower Bolts Nuts and washers for above structures as per BOM MT 12.804 0.0 0.0 |
| 8 | TOWER ACCESSORIES (a) Number Plate Nos. 49.0 0.0 0.0 (b) Danger Plate Nos. 49.0 0.0 0.0 (c) Phase Plate in sets of red, blue and yellow for Tension towers Nos. 25.0 0.0 0.0 (d) Bird Guard for towers Nos. 144.0 0.0 0.0 (e) Pipe type earthing material for towers Nos. 49.0 0.0 0.0 |
| 9 | POLYMER INSULATORS / COMPOSITE SILICON RUBBER INSULATOR STRING (a) 70 KN suitable for 132 KV suspension fitting per string 75.0 0.0 0.0 (b) 120 KN suitable for 132 KV tension fitting per string 178.0 0.0 0.0 |
| 10 | HARDWARES SUITABLE FOR ACSR PANTHER (a) Single suspension fittings Nos. 75.0 0.0 0.0 (b) Single Tension fittings Nos. 150.0 0.0 0.0 (c) Double Tension fittings Nos. 28.0 0.0 0.0 |
| 11 | CONDUCTOR ACCESSORIES SUITABLE FOR ACSR PANTHER (a) Vibration Dampers Nos. 310.0 0.0 0.0 (b) Mid Span compression Joint Nos. 50.0 0.0 0.0 (c) Repair sleeves Nos. 50.0 0.0 0.0 (d) Preformed Armour Rod Nos. 75.0 0.0 0.0 |
| 12 | OPGW (48 FIBRE) (a) 48 Fibre (DWSM) OPGW Fibre Optic Cable route km 16.0 0.0 0.0 (b) Supply & Installation of Hardware set for 48 Fibre (DWSM) OPGW* route km 16.0 0.0 0.0 (c) Joint box (48 Fibre) Nos. 12.0 0.0 0.0 (d) FODP (96 F) Nos. 2.0 0.0 0.0 (e) Fibre Optic Approach Cable for 48 F OPGW route km 1.5 0.0 0.0 (f) Supply & Installation of hardware set for 48 Fibre (DWSM, G.652D) Fibre Optic Approach Cable* route km 1.5 0.0 0.0 Total 0.0 NOTE: * One set of installation hardware set shall contain all installation hardware fittings & accessories as may be required for 1 km of OPGW/Fibre Optic Approach Cable. * Tenderer must quote their rates for Ex-Works, Packing and Forwarding, Freight and Insurance Charges separately in Indian Rupees and upto 02 decimal places only as per Columns of above Price Schedule. * GST shall be paid extra (applicable at the time of supply/work) on total of Ex-Works, Packing and Forwarding, Transportation and Insurance Charges. Present rate of GST on work contract is 18%. Signature Date: Bidder Name: Designation : Name & Address of Company SCHEDULE S-2 : (ERECTION WORK) Tender Specification No.: TD-571/26 Name of Firm: S N Description Unit QTY Unit Rate (Rs.) Amount Exclusive of GST (Rs.) |
| 13 | Survey including preparation of schedule of materials, marking of locations (Route length),GPS Survey of line with co-ordinates of each tower(The length of line shall be authenticated by GPS Survey) |
| 14 | Check survey |
| 15 | Soil testing |
| 16 | Cost of excavation of 132 KV tower foundation pits including all earth work,backfilling, levelling etc. |
| 17 | Setting of stubs including all foundation work but excluding the cost of concerting and excavation (Rate per location) for following towers : (a) 132 KV DA Nos. 24.0 0.0 (b) 132 KV DB Nos. 7.0 0.0 (c) 132 KV DC/DE Nos. 17.0 0.0 (d) 220 KV MC Nos. 1.0 0.0 |
| 18 | Cost of concreting for all types of tower foundation including cost of cement,dewatering,shoring and shuttering,forming,curing but excluding cost of reinforcement bars (a) 1:2:4 concreting Cu.m. 1349.17 0.0 |
| 19 | Erection of Superstructure of 132KV/220KV Towers and Anchor tower and their extensions wherever required including all work above ground level excluding hoisting of insulators, hardware & accessories, but including fitting of danger number, phase plates, bird guard and fixing & punching for 132/220KV SC/DC/MC lines |
| 20 | Tack welding of all the bolts up to the height of one section of the tower or 5 meter from ground level whichever is higher with three tacks at 1200seperatiion of minimum 10 mm thickness with 10mm/12 mm electrode & application of Zinc rich Aluminium paint on the affected surface including cost of all material including tack welding of River Crossing tower & Anchor towers. |
| 21 | Laying, stringing, tensioning clamping, jointing etc of ACSR ‘Panther’ conductor including hoisting of insulators , fitting of all necessary hardware and accessories i.e. fittings Armour rods, vibration dampers etc.on all Six phases of 132 KV DC lines |
| 22 | Laying, stringing, tensioning, clamping, jointing,including fittings of all necessary Hardware and accessories of OPGW & OFAC,installation of FODP, termaination at S/s, end to end connectivity & testing etc on 132KV & 220 KV lines |
| 23 | Splicing & Installation of Joint box (48fiber) |
| 24 | Installation ,termination, testing & commissioning of Fiber Optic approach cable for 48F OPGW alongwith all necessary hardware sets. |
| 25 | Grounding work including earth work etc for pipe type grounding including cost of coke & salt. |
| 26 | Installation of steel reinforcement bars in R.C.C. foundation including cost of steel reinforcement bars with cutting, bending, placing, binding etc. |
| 27 | Dismantling of old existing 132/220kV Tower with all accessories including stacking of tower parts and shifting of all material from site to store. |
| 28 | Carriage of Dismantled material from site to store and stacking at store |
| 29 | Dismantling of earliers foundation which includes excavation , breaking of foundations upto 2 meter depth and removing of stubs and steel reinforcement, backfilling, levelling and making field suitable for agriculture |
| 30 | Dismantling of old existing All 3 Phases of ACSR Moose Conductor with all accessories including re-rolling of dismantled conductor on empty drums for reuse and shifting of all material from site to store. Total 0.0 Date: Signature Bidder Name: Designation : Name & Address of Company |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender