Tender For Development Of Smart Meter Cell And Capacity Enhancement Of Nidan 1912 Call Center At It Park Jabalpur.
Tender Value
16.66 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
11 days left
EMD
16660
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Smart Meter Cell And Capacity Enhancement Of Nidan 1912 Call Center At It Park Jabalpur.
BOQ
| Sl. No. | Item Description |
| 1 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%,..With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. |
| 2 | Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. |
| 3 | Supply and fixing surface mounting LED down lighter, LED of 1 to 3Watt each assembled on single MCPCB, having color temp upto 6500K..22/24Watt, color temp 3000-6500k as required. |
| 4 | Cassette AC :- Supply installation testing and commissioning of split type ceiling cassette Slim line/floor standing air conditioning unit of capacity including indoor, outdoor unit fitted with rotary compressor ..3.8/4 TR three phase |
| 5 | Supply and installation of Motion Full Back Mesh Ergonomic Office Chair (Black Ink), featuring a full/high-back knitted mesh backrest, ergonomic seating with EasyFlex/active-seating design, adjustable armrests, adjustable seat height, swivel mechanism, castors and three-position back-tilt limiter.The chair shall have a polypropylene or manufacturer-approved engineered polymer frame/body, black mesh upholstery and an approximate overall dimension of 760 mm (W) × 760 mm (D) × 1,095 mm (H), with seat width of approximately 485 mm and seat depth of approximately 490 mm, subject to confirmation by the manufacturer. The chair shall be supplied in new condition, assembled at site, tested for proper functioning and covered by a minimum one-year manufacturer warranty as per direction in engineer in charge |
| 6 | Supply and installation of a 20' × 3'-6\\" (Table Height 2'-6\\" and Partition Height 1'-6\\") modular workstation system with a seating capacity of 13 persons, as per the approved drawings, suitable for Call Centre operations. The workstation shall comprise durable worktops, a rigid powder-coated metal frame/support structure, acoustic privacy panels/partitions, and integrated cable-management provisions. The worktops shall be made of durable board material with appropriate edge banding, smooth and rounded edges, and a finish resistant to normal office wear and tear. The acoustic panels shall provide adequate acoustic separation and allow convenient access to electrical and data cabling through removable panels or suitable access arrangements. The system shall include integrated cable ducts for horizontal and vertical cable routing, cable grommets, under-desk cable trays, and provisions for mounting electrical switches and sockets wherever required. All necessary supports, connectors, fasteners, edge finishing and accessories shall be included in the scope of supply and installation. The workstation shall be supplied in a colour and finish approved by the Department, and its dimensions and configuration shall conform to the approved drawings and be verified at site before installation as per direction in engineer in charge |
| 7 | Providing and Fixing of White Decorative Wallpaper of Adequate Thickness on Internal Wall Surfaces, Including Surface Preparation, Adhesive Application, and All Allied Works, Complete in All Respect |
| 8 | Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level |
| 9 | 15 mm cement plaster on the rough side of single or half brick wall of mix |
| 10 | Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm |
| 11 | Supply and Installation of wall-to-wall carpeting work using commercial-grade acoustic carpet tiles or approved broadloom carpet, with a minimum thickness of 6–8 mm, suitable for high-footfall office and Call Centre use. The carpet shall have durable backing, low pile, stain resistance, easy-maintenance properties and appropriate fire-performance documentation for the intended occupancy. The colour and pattern shall be approved by the Department. The work shall include preparation of the subfloor to ensure it is clean, dry, smooth and level; application of compatible adhesive or use of an approved installation system; provision of edge trims; and neat finishing around partitions, doorways and other obstructions. The carpet shall be laid uniformly without bubbles, lifting edges or visible uneven joints. The scope shall include cutting, wastage, fixing, finishing and cleaning after completion. All work shall be executed as per the drawings approved by the Department, and the final area shall be measured and verified at site as per direction in engineer in charge |
| 12 | Providing and fixing of ABC Power type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating..Capacity 6.0 kg |
| 13 | Supply, installation testing andcommissioning of wall mounting rack, forcomputer switches complete as mentioned below :- |
| 14 | Supply, installation testing andcommissioning of 19\\" modular patch - 1 Upatch panel 24, RJ 45 cat-6 connector |
| 15 | Supply, installation testing andcommissioning RJ - 45 computer jack cat 6with shutter modular (1Module)..RJ - 45 computer socket cat 6 tool lessconnection |
| 16 | Supply, installation testing andcommissioning RJ - 45 computer jack cat 6with shutter modular (2Module) |
| 17 | Supply, installation testing andcommissioning of patch cord asmentioned below :-CAT 6 RJ45 patch cord UTP 2 metre |
| 18 | CAT 6 RJ45 patch cord UTP 5 metre |
| 19 | Supplying and drawing 4 pair un-shieldedtwisted pair (UTP), 0.5 mm PVC insulatedcopper conductor un-armoured Cat-6computer cable FRLS |
| 20 | Supplying and drawing 4 pair shieldedtwisted pair (STP), 0.5 mm PVC insulatedcopper conductor un-armoured Cat-6computer cable FRLS |
| 21 | Supply and erection of hot dip G.I. cabletray perforation not more than 17.5% forspecific dimensions along with tees, bends. The cable tray shall be hang from ceiling..150 x 50 x 1.6mm thick |
| 22 | Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping of ISI marked suitable size etc. as required as per specification2x2.5 Sq.mm. |
| 23 | Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in Surface rigid P.V.C. casing and caping of ISI marked suitable size etc. as required as per specification4x2.5 Sq.mm. |
| 24 | Supplying and fixing of approved makemodular type PVC box minimum depth40mm and minimum thickness 2mm..3 Module PVC box |
| 25 | Supplying and fixing of approved makemodular type PVC box minimum depth40mm and minimum thickness 2mm..12 Module PVC box |
| 26 | Same board switch & socket 16Amp./S.S. combined 20/16/6 Amp Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender