Housing Urban and Rular Development Government Departments Closing in 2 days TDR #58404234

Tender For Providing Waiting Shed And Vehicle Shed Arrangements For The Work Of Construction Of New Sub Registrar Office Building With Modern Facilities At Mulanur Of Dharapuram Taluk In Tiruppur District.(Second Call)

Issued by Government Departments · Tiruppur, Tamil Nadu
Tender Value
9.97 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
2 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing Waiting Shed And Vehicle Shed Arrangements For The Work Of Construction Of New Sub Registrar Office Building With Modern Facilities At Mulanur Of Dharapuram Taluk In Tiruppur District.(Second Call)

BOQ

Name of Work:- Providing waiting shed and vehicle shed arrangements for the work of Construction of New Sub Registrar office Building with Modern facilities at Mulanur of Dharapuram Taluk in Tiruppur District.(Second Call)
Sl. No. Item Description
1Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.- Upto 2.40m Footing Depth.
2Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means
3Brick work in Cement Mortar 1:5 using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.
4FOR FOUNDATION AND BASEMENT
5FOR SUPERSTRUCTURE IN GROUND FLOOR
6Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
7Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
8Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.
9Painting newly plastered wall surface with two finishing coats of ready mixed emulsion paint of approved quality and colour over one coat of priming in all floors including the cost of primer with etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on work)
10Manufacturing, supplying and fixing of 1/3 panelled and 2/3 grilled steel doors with the following specification M.S angles of a size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm M.S. flat is provided at required intervals in the shutter frames 18 gauge C.R. sheet is laid as panel in the shutter and welded intact for 1/3 bottom portion of the shutter. M.S. flat 18x5mm is welded over the 32x6mm M.S. flat sandwitching the CR sheet in between. Additional stiffener with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. The balance 2/3 portion at top is provided with grill at an average weight of 20kg/sq.m and 3 Nos Steel Parliament Hinges of Size 125mm x 150mm incase single leaves shutter to be provided, 6 Nos Steel Parliament Hinges of Size 125mm x 150mm for double leaves shutter to be provided, 6nos of holdfasts 200mm in length made of angle section spliced at the ends are welded to the outer frame of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided. one aldrop is provided at on appropriate place in the door. 2Nos of handle are to be provided. A Tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation or fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of all meterials, labour charges, taxes, transportation to site of work, loading, unloading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers.
11Single leaf of size 1.00m x 2.10m.
12Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
13Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.
14Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers.
15Supplying and fixing of Water Dispenser with Following Specification. The Dispenser shall be built with Stainless Steel 304 Grade for the size of 510 mm (L) x 480 mm (W) x 1400 mm (H). The water tank capacity should be 15 ltrs for Normal Water, 15 ltrs for Cold water and 4 ltrs for Hot Water. The rate is inclusive of internal pipelines between the tanks. The outlet pipe shall be provided with 3 nos of SS tap with tray for avoiding the spill over water. The waste hose should be provided from the spill over tray and should be connected to the waste line provided. The inlet should be connected from existing Angle valve without any leakages. The rate is inclusive of loading, unloading and conveyance charges, etc complete complying with standard specification.
16Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using adhesive along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.
17Supplying and Fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes
18Aluminium Dye Cast Letters 9’’ size
19Supplying and fixing with Tamil Stainless Steel emblem of 15\\" size including all labour charges for making and conveyance to work site extra complete as directed by the departmental officers.
20Emblem (15”)
21Supplying & Installing CURTAIN BLINDS with Sunscreen perforated Roller blind optima series Basket 125 Tex with fabric specification of (Fabric compositition polyster 22% and PVC78%, Openenss Factor-5%, Thickness -0.68MM +/-5%, weight per m2 -480 GSM, yarns count in wrap/ weft/cm 19/18+/-5%, Fire Resistance-FR(USA) KFI(Korea), Tear Resistance-wrap11.9 daN+/- 5%,WEFT 150 daN+/-5%,colour fastness-6-7/8 (white colour base), artificial llight xenon lamp, UV resistance Min3 (White colour base), width 2.5M & 3 M. The Roller mechanism shall be a moulded unit made from engineering grade plastic polymer with PVC spring support.The Fabric shall be attached to the roller tube with high quality self adhesive tape with manual operation. The fabric shall be attached to the tube with adhesive strip. It should have minimum one ton fabric which must be placed on the roller before the working section of fabric start Operational action shall be smooth
22GST @ 18% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58404234
AUTHORITY Government Departments
TENDER VALUE 9.97 Lakhs
LAST DATE 19-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Providing Waiting Shed And Vehicle Shed Arrangements For The Work Of Construction Of New Sub Registrar Office Building With Modern Facilities At Mulanur Of Dharapuram Taluk In Tiruppur District.(Second Call)
Basic Detail
Tender No NIT09-06/04.11.2026
Bidding Type Tender
Location
City Tiruppur
State Tamil Nadu
Key Dates
Publish Date 05 Nov 2026
Submission Date 19 Nov 2026
Open Date 19 Nov 2026
Finance
Tender Value 9.97 Lakhs
Tender Fee Ref. Documents
EMD 10000
Exemption Not Available
Document List
84a7e425-4886-4f94-bf57-91d4aadf1f6f.html
BOQ_867878.xls
GenConditionSROMulanurWaitingshed.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 19, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

84a7e425-4886-4f94-bf57-91d4aadf1f6f.html

xls

BOQ_867878.xls

pdf

GenConditionSROMulanurWaitingshed.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender